Reconstructed 3-d magnetic field structure and hard X-ray two ribbons for 2000 Bastille-day event

The Bastille-day event in 2000 produced energetic 3B/X5.6 flare with a halo CME, which had great geo-effects consequently. This event has been studied extensively and it is considered that it follows the two-ribbon flare model. The flare/CME event was triggered by an erupting filament and TRACE observations showed formation of giant arcade structures during the flare process. Hard X-ray (HXR) two ribbons revealed for the first time in this flare event (Masuda et al., 2001). The reconstruction of 3-D coronal magnetic fields revealed a magnetic flux rope structure, for the first time, from extrapolation of observed photospheric vector magnetogram data and the flux rope structure was co-spatial with portion of the filament and a UV bright lane (Yan et al., 2001a, 2001b). Here we review some recent work related to the flux rope structure and the HXR two ribbons by comparing their locations and the flux temporal profiles during the flare process so as to understand the energy release and particle accelerations. It is proposed that the rope instability may have triggered the flare event, and reconnection may occur during this process. The drifting pulsation structure in the decimetric frequency range is considered to manifest the rope ejection, or the initial phase of the coronal mass ejection. The HXR two ribbons were distributed along the flux rope and the rope foot points coincide with HXR sources. The energy dissipation from IPS observations occurred within about 100 R _⋅ is consistent with the estimate for the flux rope system. This revised version was published online in August 2006 with corrections to the Cover Date.     

降落伞稳定下降阶段流场的数值模拟

随着计算流体力学 (CFD)和结构有限元分析法的兴起 ,精确描绘降落伞力学特性成为可能。文中采用有限体积法求解不可压流的N -S方程 ,采用Spalart-Allmaras(SA)模型作为湍流模型 ,以模拟降落伞稳定下降阶段时的流场特性。流场的计算结果与实验数据基本一致 ,这表明该方法对降落伞的分析是有效并且可行的     

雷达／红外综合探测系统抗干扰能力的建模

选择目标探测概率这一性能参数衡量雷达/红外综合探测系统的抗干扰能力,建立了压制式干扰情况下该综合探测系统的目标探测能力的数学模型,并通过计算机仿真验证了该模型的适用性。     

轴对称降落伞稳定下降阶段的流场特性

文章根据降落伞的特点,通过3点假设(伞衣的薄膜假设、降落伞的轴对称假设和流场的定常 假设),将三维复杂流动问题,转化成二维轴对称问题,以节约计算时间。然后,建立轴对称降落伞的流体力 学计算模型,利用数值模拟手段,求解RNG(Renormalization Group)k-epsilon湍流模型下的N—S方程组,获 得与有关单位试验相吻合的计算结果。分析发现带顶孔的轴对称降落伞绕流和亚临界状态下带中心孔的 圆球绕流,在尾流区拓扑结构上几乎完全一致。结果表明建立的轴对称降落伞模型,能够揭示降落伞流场 的本质特性,为进一步研究降落伞流场的流动机理和流固耦合问题打下基础。     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

On the Coronal Magnetic Field Configuration and Solar Flare/CME Process

The coronal magnetic field configuration is important for understanding the energy storage and release processes that account for flares and/or CMEs. Here we present a model which is based on the work for potential magnetic field problems that only applies the condition at infinity with the boundary condition on the solar surface specified. We also discuss some recent progress on general force-free field models. For some event analyses, we have employed MDI/SOHO longitudinal magnetogram insected into the synoptic magnetogram to obtain whole boundary condition over the solar surface. Globally, the extrapolated global magnetic field structures effectively demonstrate the case for the disk signature of the radio CMEs and the evolution of the radio sources during the CME/flare processes.     

离子注入抑制摩擦温升的研究

 离子注入抑制摩擦表面的温升,是减少粘着磨损、提高摩擦副耐磨性的新途径。本文采用离子注入技术抑制航空柱塞泵配流副试件摩擦表面的温升,获得显著的效果。当逐级改变负载时,离子注入试件摩擦表面的温度平均下降３５℃；当逐级改变润滑油流率时,试件表面温度平均下降４６℃。并初步探讨了离子注入抑制摩擦温升的机理。     

SBS改性再生型木塑复合材料及其耐水性能

为了充分利用城市固体废弃物中的各项资源，本项工作将固体废弃物中的高密度聚乙烯（HDPE）回收后与废弃的木纤维、苯乙烯-丁二烯-苯乙烯（SBS）进行复合，成功地制备出SBS／再生型木塑复合材料，并进行了力学性能测试和水煮试验。结果表明，SBS的加入使木塑复合材料的冲击韧性得到显著改善，同时，复合材料的弯曲强度和弯曲模量没有明显的影响，表明SBS可以作为木塑复合材料的增韧剂。SBS／木塑复合材料经过8周、60℃的水煮后，复合材料的吸水率和厚度膨胀率均有所增加，弯曲模量和冲击韧性分别平均下降14．4％、10．8％。水煮试验初期复合材料的弯曲强度逐渐降低，然后又逐渐增大，第8周后弯曲强度增加的幅度约10％。木塑复合材料的冲击破坏模式以界面脱粘为主，而加入SBS后，复合材料的破坏以纤维断裂和基体断裂为主。     

流变铸造法制备Al_2O_（3P）／ZA4－3复合材料的研究

为提高模用锌合金ＺＡ４－３的性能，扩大其应用范围，本项工作采用流变铸造法成功地制备了性能稳定的Ａｌ２Ｏ３Ｐ／ＺＡ４－３复合材料。对该材料进行了弯曲强度、冲击韧性、压缩强度、硬度及耐磨性等性能试验，结果表明：Ａｌ２Ｏ３ｐ的加入，使锌合金的压缩强度、室温和高温硬度以及耐磨性明显提高，其弯曲强度略有降低，而其冲击韧性下降了　。最后还讨论了成形工艺参数、颗粒含量和颗粒直径对该复合材料性能的影响。     

建筑物风环境三维定常数值仿真

针对建筑物的风环境问题，采用计算流体动力学CFD软件对两幢建筑物进行了数值模拟，得出了建筑物的风场分布，以及风载的分布规律，结果表明，气流在来流方向第一幢建筑物的顶部、两侧的前沿产生分离，建筑物之间产生强烈的漩涡，顶部的局部负压最大。