Effect of boundary conditions on downstream vorticity from counter-rotating swirlers

Particle image velocimetry(PIV) is utilized to measure the non-reacting flow field in a reflow combustor with multiple and single swirlers. The velocity field, vortex structure and total vorticity levels are experimentally obtained using two different boundary conditions, representing a single confined swirler and multiple swirlers in an annular combustor. The influence of the boundary conditions on the flow field at several locations downstream of the swirlers is experimentally investigated, showing that the central vortex in the multi-swirler case is more concentrated than in the single-swirler case. The vorticity of the central vortex and average cross-sectional vorticity are relatively low at the swirler outlet in both cases. Both of these statistics gradually increase to the maximum values near 20 mm downstream of the swirler outlet, and subsequently decrease. It is also found that the central vortex in the multi-swirler case is consistently greater than the single-swirler case. These results demonstrate the critical influence of boundary conditions on flow characteristic of swirling flow, providing insight into the difference of the experiments on testbed combustor and the full-scale annular combustors.     

应用LDV对压水反应堆棒束间流场的研究

在50年代,对于反应堆棒束周围的速度分布与湍流强度分布就有人进行过试验研究,但几乎所有的人都是借助于传统的探头,其探头对流场往往会造成剧烈的扰动。本文介绍了用作者研制成的具有高分辨率的偏振差动式激光测速仪(简称 PLDV)测量压水热核反应堆中棒束间的平均速度场分布、湍流强度、自相关函数和功率谱的试验研究,初步结果表明,在平行于棒束轴向棒束间流动参数,其测量结果是准确、合理的,测量系统可靠,其试验方法也是正确的。     

Optimal deployment schedule of an active twist rotor for performance enhancement and vibration reduction in high-speed flights

The best active twist schedules exploiting various waveform types are sought taking advantage of the global search algorithm for the reduction of hub vibration and/or power required of a rotor in high-speed conditions.The active twist schedules include two non-harmonic inputs formed based on segmented step functions as well as the simple harmonic waveform input.An advanced Particle Swarm assisted Genetic Algorithm (PSGA) is employed for the optimizer.A rotorcraft Computational Structural Dynamics (CSD) code CAMRAD Ⅱ is used to perform the rotor aeromechanics analysis.A Computation Fluid Dynamics (CFD) code is coupled with CSD for verification and some physical insights.The PSGA optimization results are verified against the parameter sweep study performed using the harmonic actuation.The optimum twist schedules according to the performance and/or vibration reduction strategy are obtained and their optimization gains are compared between the actuation cases.A two-phase non-harmonic actuation schedule demonstrates the best outcome in decreasing the power required while a four-phase non-harmonic schedule results in the best vibration reduction as well as the simultaneous reductions in the power required and vibration.The mechanism of reduction to the performance gains is identified illustrating the section airloads,angle-of-attack distribution,and elastic twist deformation predicted by the present approaches.     

Optimization of Perturbed Spacecraft Trajectories Using Complex Dual Numbers. Part 2: Numerical Results

Cosmic Research - Numerical results are presented for optimizing the perturbed trajectories of spacecraft with finite-thrust. The optimal trajectories are calculated using an indirect approach...     

Evaluation of a Geiger-mode imaging flash lidar in the approach phase for autonomous safe landing on the Moon

The imaging flash lidar has been considered as a promising sensor for the future space missions such as autonomous safe landing, spacecraft rendezvous and docking due to its ability to provide a full 3D scene with a single or multiple laser pulses. The linear-mode flash lidar has been developed and demonstrated for an autonomous safe landing on the Moon in order to provide an accurate distance measurement to the landing site and its 3D image. Yet, the Geiger-mode flash lidar has also been recognized as an emerging technology for the space missions because it is highly sensitive even to a single photon and provides the very accurate timing of photon arrival. In this study, the performance of the Geiger-mode flash lidar is simulated in the approach phase and evaluated for the autonomous landing on the Moon. Furthermore, a new statistical signal processing algorithm is proposed to remove the noise counts in order to obtain the 3D image from a sequence of laser pulses in the situation of the fast moving spacecraft. The algorithm is shown to be effective for the autonomous landing due to its ability to remove noise events under the condition of low signal-to-noise ratio and improve ranging accuracy.     

A new approach to the telescope operation method for satellite tracking using a time synchronization technique

For the development of a telescope that is capable of precisely tracking satellites and high-speed operation such as satellite laser ranging, a special method of telescope operation is required. This study aims to propose a new telescope operation method and system configuration for the independent development of a mount and an operation system which includes the host computer. Considering that the tracking of a satellite is performed in real time, communication and synchronization between the two independent subsystems are important. Therefore, this study applied the concept of time synchronization, which is used in various fields of industry, to the communication between the command computer and the mount. In this case, communication delays do not need to be considered in general, and it is possible to cope with data loss. Above all, when the mount is replaced in the future, only the general communication interface needs to be modified, and thus, it is not limited by replacement in terms of the overall system management. The performance of the telescope operation method developed in this study was verified by applying the method to the first mobile SLR system in Korea. This study is significant in that it proposed a new operation method and system configuration, to which the concept of time synchronization was applied, for the observation system that requires an optical telescope.     

Modified input estimation technique using pseudoresiduals

An adaptive tracking filter for maneuvering targets is proposed using modified input estimation technique. Pseudoresiduals are defined using measurements and the velocity estimate at the hypothesized maneuver onset time. With the pseudoresiduals and a new target model representing transitions of nominal accelerations, a new input estimation method for tracking a maneuvering target is derived. Since the proposed detection technique is more sensitive to maneuvers than previous work, the shorter window length can be employed to detect and compensate target maneuvers. Also shown is that the tracking performance of the proposed filter is similar to that of interacting multiple model method (IMM) with 3 models, while computational loads of our method are drastically reduced     

Old-Aged Primary Distance Indicators

Old-aged stellar distance indicators are present in all Galactic structures (halo, bulge, disk) and in galaxies of all Hubble types and, thus, are immensely powerful tools for understanding our Universe. Here we present a comprehensive review for three primary standard candles from Population II: (i) RR Lyrae type variables (RRL), (ii) type II Cepheid variables (T2C), and (iii) the tip of the red giant branch (TRGB). The discovery and use of these distance indicators is placed in historical context before describing their theoretical foundations and demonstrating their observational applications across multiple wavelengths. The methods used to establish the absolute scale for each standard candle is described with a discussion of the observational systematics. We conclude by looking forward to the suite of new observational facilities anticipated over the next decade; these have both a broader wavelength coverage and larger apertures than current facilities. We anticipate future advancements in our theoretical understanding and observational application of these stellar populations as they apply to the Galactic and extragalactic distance scale.     

NEW APPROACHES OF MUSCL SCHEMES FOR COMPRESSIBLE FLUIDS

The MUSCL scheme for compressible gas dynamicsis studied in this paper. We propose a new type of Euleri-an MUSCL scheme, which evaluates the intercell flux athalf time step. The intercell flux is comptuted from char-acteristic equations with the data which traced backthrough the approximatecharacteristic from the edge athalf time step. The data is classified in several differenttypes, depending on the characteristic directions of data.We also present a general procedure of oscillation-fre…     

Sensitivity analyses of satellite propulsion components with their thermal modelling

Performing the sensitivity analyses of the contact conduction and the position of thermostat on the basis of the thermal model established, the study of thermal design is accomplished for the preparation of possible mechanical interface change of the satellite propulsion system depending on the satellite system design. A relatively simple thermal model is taken into consideration for the convenience of the analysis. A variety of the spacecraft bus voltages and the contact resistances are examined as well as the position of thermostat on propulsion components. As a consequence, even though the mechanical interface condition is changed on the same module, the successful thermal design could be achieved if we design the heater to have sufficiently large power with reference to the heritage value of contact resistance. Besides the reasonable performance on the thermal control is assured with the thermostat location errors, if the uncertainty in the position of thermostat is not quite large when assembling tank module.