Antenna for precise orbit determination

The ESA SWARM mission will consist of three satellites that will measure the Earth magnetic field. The system calls for metre accuracy knowledge of the measurement locations. To achieve this a GPS receiver is used. At least four GPS signals are tracked to determine the code and carrier ranges, from which the position can be derived. The accuracy improves when using more GPS satellites and by averaging over many measurements. The latter is achieved in ground processing with a model-based orbit prediction, resulting in cm accuracy. The main error contributions in the processing are often measurement errors due to satellite multi-path effects. The multipath effects are characterized by measuring the antenna on a 1.5 m mock-up, representing the 9 m long satellite. In order to verify that the mock-up is representative, extensive electromagnetic simulations were made. The simulations included the antenna and the complete satellite and were then reduced to the antenna and a section of the satellite. The actual design of the antenna was performed with several levels of software. First, a fast bodies-of-revolution simulation found a geometry with the right coverage. Then, a finite element method simulation allowed us to match the antenna at two frequencies simultaneously.     

System test results from the GNC experiments on the PRISMA in-orbit test bed

The PRISMA in-orbit test bed will demonstrate guidance, navigation, and control strategies for spacecraft formation flying and rendezvous. The project is funded by the Swedish National Space Board and the prime contractor is the Swedish Space Corporation. The project is further supported by the German Aerospace Center, the Technical University of Denmark, and the French Space Agency. PRISMA was launched on June 15, 2010 and after three weeks of operations, all on-board systems and units have passed an initial commissioning phase. Separation of the two PRISMA satellites from each other is expected by mid-August 2010.PRISMA consists of two spacecraft: MAIN and TARGET. The MAIN spacecraft has full orbit control capability while TARGET is attitude controlled only.The Swedish Space Corporation is responsible for three groups of guidance, navigation, and control experiments. These experiments include GPS- and vision-based formation flying during which the spacecraft will fly in passive as well as forced motion. The three experiments are: autonomous formation flying, proximity operations with final approach/recede maneuvers, and autonomous rendezvous. This paper presents system test results from two of these experiments as obtained with the flight-ready system. The system tests consist of a series of simulations performed on the flight model spacecraft with a large amount of hardware in the loop.     

Ocean Tides in GRACE Monthly Averaged Gravity Fields

The GRACE mission will map the Earth's gravity fields and its variations with unprecedented accuracy during its 5-year lifetime. Unless ocean tide signals and their load upon the solid earth are removed from the GRACE data, their long period aliases obscure more subtle climate signals which GRACE aims at. In this analysis the results of Knudsen and Andersen (2002) have been verified using actual post-launch orbit parameter of the GRACE mission. The current ocean tide models are not accurate enough to correct GRACE data at harmonic degrees lower than 47. The accumulated tidal errors may affect the GRACE data up to harmonic degree 60. A study of the revised alias frequencies confirm that the ocean tide errors will not cancel in the GRACE monthly averaged temporal gravity fields. The S₂ and the K₂ terms have alias frequencies much longer than 30 days, so they remain almost unreduced in the monthly averages. Those results have been verified using a simulated 30 days GRACE orbit. The results show that the magnitudes of the monthly averaged values are slightly higher than the previous values. This may be caused by insufficient sampling to fully resolve and reduce the tidal signals at short wavelengths and close to the poles. This revised version was published online in August 2006 with corrections to the Cover Date.     

PRISMA—A formation flying project in implementation phase

The PRISMA project for autonomous formation flying and rendezvous has passed its critical design review in February–March 2007. The project comprises two satellites which are an in-orbit testbed for Guidance, Navigation and Control (GNC) algorithms and sensors for advanced formation flying and rendezvous. Several experiments involving GNC algorithms, sensors and thrusters will be performed during a 10 month mission with launch planned for the second half of 2009.The project is run by the Swedish Space Corporation (SSC) in close cooperation with the German Aerospace Center (DLR), the French Space Agency (CNES) and the Technical University of Denmark (DTU). Additionally, the project also will demonstrate flight worthiness of two novel motor technologies: one that uses environmentally clean and non-hazardous propellant, and one that consists of a microthruster system based on MEMS technology.The project will demonstrate autonomous formation flying and rendezvous based on several sensors—GPS, RF-based and vision based—with different objectives and in different combinations. The GPS-based onboard navigation system, contributed by DLR, offers relative orbit information in real-time in decimetre range. The RF-based navigation instrument intended for DARWIN, under CNES development, will be tested for the first time on PRISMA, both for instrument performance, but also in closed loop as main sensor for formation flying. Several rendezvous and proximity manoeuvre experiments will be demonstrated using only vision based sensor information coming from the modified star camera provided by DTU. Semi-autonomous operations ranging from 200 km to 1 m separation between the satellites will be demonstrated.With the project now in the verification phase particular attention is given to the specific formation flying and rendezvous functionality on instrument, GNC-software and system level.     

Spacecraft formation flying: A review and new results on state feedback control

This paper presents a review of previous work within the field of spacecraft formation flying, including modeling approaches and controller design. In addition, five new approaches for tracking control of relative translational motion between two spacecraft in a leader–follower formation are derived. One PD controller with feedback linearisation is derived and shown to result in an exponentially stable equilibrium point of the closed loop system. Four nonlinear controllers are derived and proved by using Lyapunov theory and Matrosov's theorem to leave the closed loop system uniformly globally asymptotically stable. Results from the simulation of the system with the derived controllers are presented, and compared with respect to power consumption and tracking performance.     

A facility for long-term Mars simulation experiments: the Mars Environmental Simulation Chamber (MESCH)

We describe the design, construction, and pilot operation of a Mars simulation facility comprised of a cryogenic environmental chamber, an atmospheric gas analyzer, and a xenon/mercury discharge source for UV generation. The Mars Environmental Simulation Chamber (MESCH) consists of a double-walled cylindrical chamber. The double wall provides a cooling mantle through which liquid N(2) can be circulated. A load-lock system that consists of a small pressure-exchange chamber, which can be evacuated, allows for the exchange of samples without changing the chamber environment. Fitted within the MESCH is a carousel, which holds up to 10 steel sample tubes. Rotation of the carousel is controlled by an external motor. Each sample in the carousel can be placed at any desired position. Environmental data, such as temperature, pressure, and UV exposure time, are computer logged and used in automated feedback mechanisms, enabling a wide variety of experiments that include time series. Tests of the simulation facility have successfully demonstrated its ability to produce temperature cycles and maintain low temperature (down to -140 degrees C), low atmospheric pressure (5-10 mbar), and a gas composition like that of Mars during long-term experiments.     

Modeling gravity effects on water retention and gas transport characteristics in plant growth substrates

Growing plants to facilitate life in outer space, for example on the International Space Station (ISS) or at planned deep-space human outposts on the Moon or Mars, has received much attention with regard to NASA’s advanced life support system research. With the objective of in situ resource utilization to conserve energy and to limit transport costs, native materials mined on Moon or Mars are of primary interest for plant growth media in a future outpost, while terrestrial porous substrates with optimal growth media characteristics will be useful for onboard plant growth during space missions. Due to limited experimental opportunities and prohibitive costs, liquid and gas behavior in porous substrates under reduced gravity conditions has been less studied and hence remains poorly understood. Based on ground-based measurements, this study examined water retention, oxygen diffusivity and air permeability characteristics of six plant growth substrates for potential applications in space, including two terrestrial analogs for lunar and Martian soils and four particulate substrates widely used in reduced gravity experiments. To simulate reduced gravity water characteristics, the predictions for ground-based measurements (1 − g) were scaled to two reduced gravity conditions, Martian gravity (0.38 − g) and lunar gravity (0.16 − g), following the observations in previous reduced gravity studies. We described the observed gas diffusivity with a recently developed model combined with a new approach that estimates the gas percolation threshold based on the pore size distribution. The model successfully captured measured data for all investigated media and demonstrated the implications of the poorly-understood shift in gas percolation threshold with improved gas percolation in reduced gravity. Finally, using a substrate-structure parameter related to the gaseous phase, we adequately described the air permeability under reduced gravity conditions.     

Sigma-mean monitoring for the local area augmentation of GPS

The local area augmentation system (LAAS) is a ground-based differential GPS system being developed to support aircraft precision approach and landing navigation with guaranteed integrity. To quantitatively appraise navigation integrity, an aircraft computes vertical and lateral protection levels using the standard deviation of pseudo-range correction errors, /spl sigma//sub pr/spl I.bar/gnd/, broadcast by the LAAS ground facility (LGF). Thus, one significant integrity risk is that the true standard deviation (sigma) of the pseudo-range correction error distribution may grow to exceed the broadcast correction error sigma or that the true mean of the correction error distribution becomes excessive during LAAS operation. This event may occur due to unexpected anomalies of GPS measurements. To insure that the true error distribution is bounded by a zero-mean Gaussian distribution with the broadcast sigma value, real-time sigma and mean monitoring is necessary. Both direct estimation and cumulative sum (CUSUM) methods are useful to detect violations with acceptable residual integrity risk. For sigma monitoring, the estimation method more rapidly detects small violations of /spl sigma//sub pr/spl I.bar/gnd/ but the fast initial response (FIR) CUSUM variant more promptly detects significant violations that would pose a larger threat to user integrity. For the purposes of mean monitoring, the FIR CUSUM variant is superior to the estimation method in detecting any mean violations. The results demonstrate that real-time protection is achievable against all sizes of sigma/mean failures that can threaten navigation integrity.