Remote sensing of planetary properties and biosignatures on extrasolar terrestrial planets

The major goals of NASA's Terrestrial Planet Finder (TPF) and the European Space Agency's Darwin missions are to detect terrestrial-sized extrasolar planets directly and to seek spectroscopic evidence of habitable conditions and life. Here we recommend wavelength ranges and spectral features for these missions. We assess known spectroscopic molecular band features of Earth, Venus, and Mars in the context of putative extrasolar analogs. The preferred wavelength ranges are 7-25 microns in the mid-IR and 0.5 to approximately 1.1 microns in the visible to near-IR. Detection of O2 or its photolytic product O3 merits highest priority. Liquid H2O is not a bioindicator, but it is considered essential to life. Substantial CO2 indicates an atmosphere and oxidation state typical of a terrestrial planet. Abundant CH4 might require a biological source, yet abundant CH4 also can arise from a crust and upper mantle more reduced than that of Earth. The range of characteristics of extrasolar rocky planets might far exceed that of the Solar System. Planetary size and mass are very important indicators of habitability and can be estimated in the mid-IR and potentially also in the visible to near-IR. Additional spectroscopic features merit study, for example, features created by other biosignature compounds in the atmosphere or on the surface and features due to Rayleigh scattering. In summary, we find that both the mid-IR and the visible to near-IR wavelength ranges offer valuable information regarding biosignatures and planetary properties; therefore both merit serious scientific consideration for TPF and Darwin.     

The cost benefits of the Spacelab system to scientific investigations and space applications

In the past, one of the major problems in performing scientific investigations in space has been the high cost of developing, integrating, and transporting scientific experiments into space. The limited resources of unmanned spacecraft, coupled with the requirements for completely automated operations, was another factor contributing to the high costs of scientific research in space. In previous space missions after developing, integrating and transporting costly experiments into space and obtaining successful data, the experiment facility and spacecraft have been lost forever, because they could not be returned to earth. The objective of this paper is to present how the utilization of the Spacelab System will result in cost benefits to the scientific community, and significantly reduce the cost of space operations from previous space programs.The following approach was used to quantify the cost benefits of using the Spacelab System to greatly reduce the operational costs of scientific research in space. An analysis was made of the series of activities required to combine individual scientific experiments into an integrated payload that is compatible with the Space Transportation System (STS). These activities, including Shuttle and Spacelab integration, communications and data processing, launch support requirements, and flight operations were analyzed to indicate how this new space system, when compared with previous space systems, will reduce the cost of space research. It will be shown that utilization of the Spacelab modular design, standard payload interfaces, optional Mission Dependent Equipment (MDE), and standard services, such as the Experiment Computer Operating System (ECOS), allow the user many more services than previous programs, at significantly lower costs. In addition, the missions will also be analyzed to relate their cost benefit contributions to space scientific research.The analytical tools that are being developed at MSFC in the form of computer programs that can rapidly analyze experiment to Spacelab interfaces will be discussed to show how these tools allow the Spacelab integrator to economically establish the payload compatibility of a Spacelab mission.The information used in this paper has been assimilated from the actual experience gained in integrating over 50 highly complex, scientific experiments that will fly on the Spacelab first and second missions. In addition, this paper described the work being done at the Marshall Space Flight Center (MSFC) to define the analytical integration tools and techniques required to economically and efficiently integrate a wide variety of Spacelab payloads and missions. The conclusions reached in this study are based on the actual experience gained at MSFC in its roles of Spacelab integration and mission managers for the first three Spacelab missions. The results of this paper will clearly show that the cost benefits of the Spacelab system will greatly reduce the costs and increase the opportunities for scientific investigation from space.     

Analytic expansions of luni-solar gravity perturbations along rotating axes for trajectory optimization—Part 2: The multipliers system and simulations

An efficient self-contained trajectory optimization software is generated by making use of de Pontécoulant's analytic lunar theory removing the need for an outside third body ephemeris program to compute the lunar and solar position vectors at each integration step. The accelerations being further resolved along the rotating Euler–Hill frame after expansion to third order in the spacecraft radial distance, the adjoint differential equations are derived in a direct manner complementing the generation of the dynamic system of equations for full compatibility. Because the variation of parameters equations are cast in terms of the nonsingular equinoctial elements with the perturbation accelerations resolved in their analytic form along the rotating axes, the adjoint equations are also derived in the same manner providing a highly efficient and accurate system of equations for rapid computations in conjunction with Aerospace Corporation's NLP2 nonlinear programming codes to search for the initial values of the multipliers that steer the spacecraft towards its target orbit in minimum time. Numerical simulations show that the solutions obtained by the analysis developed in this paper are essentially identical to the more indirect approach based on the use of inertial accelerations obtained from a separate ephemeris generator and subsequent conversions to the thrust frame and equinoctial system.     

Understanding magnetotail current sheet meso-scale structures using MHD simulations

Recent Cluster observations have strongly supported the existence of meso-scale structure in the magnetotail current sheet. In our study, a magnetohydrodynamic simulation event study exhibited current sheet behavior comparable to that seen in the Cluster observations. Geotail and DoubleStar observations also show that the simulation is providing a realistic representation of the magnetosphere during the period of interest; that is, when the current sheet evidently becomes bifurcated. The magnetohydrodynamic simulation allows us to place the local observations into a global contest. It shows that the observations can be explained in terms of localized reconnection tailward of the Cluster location and the formation of a flux rope nearby. The simulation also features wave-like structure across the current sheet.     

Autonomous guidance and control of Earth-orbiting formation flying spacecraft: Closing the loop

Previous work on autonomous formation flying guidance and control identified three key challenges to overcome in order to obtain a fully autonomous guidance and control loop: an accurate but simple model of relative motion about elliptical and perturbed orbits, an efficient way of performing conflicting requirements trade-off with power-limited on-board computers, and finally an optimal or near-optimal control algorithm easy to implement on a flight computer. This paper first summarizes recent developments on each of these subject that help to overcome these challenges, developments which are then used as building blocks for an autonomous formation flying guidance and control system. This system autonomously performs trade-offs between conflicting requirements, i.e. minimization of fuel cost, formation accuracy and equal repartition of the fuel expenditure within the formation. Simulation results show that a complete guidance and control loop can be established using mainly analytical results and with very few numerical optimization which facilitates on-board implementation.     

Highlights about the performances of storm-time TEC modelling techniques for low/equatorial and mid-latitude locations

A statistical evaluation of storm-time total electron content (TEC) modelling techniques over various latitudes of the African sector and surrounding areas is presented. The source of observational TEC data used in this study is the Global Navigation Satellite Systems (GNSS), specifically the Global Positioning Systems (GPS) receiver networks. For each selected receiver station, three different storm-time models based on empirical orthogonal functions (EOF) analysis, non-linear regression analysis (NLRA) and Artificial neural networks (ANN), were implemented. Storm-time GPS TEC data used for both development and validation of the models was selected based on the storm criterion of $\mathit{Dst}?-50$ nT or $K_p?4$ to take into account both coronal mass ejections (CMEs) and co-rotating interaction regions (CIRs) driven storms, respectively. To make an independent test of the models, storm periods considered for validation were excluded from datasets used during the implementation of the models and results are compared with observations, monthly median values, and International Reference Ionosphere (IRI-2016) predictions. Considering GPS TEC as reference, a statistical analysis performed over six storm periods reserved for validation revealed that ANN model is about 10%, 26%, and 58% more accurate than EOF, NLRA, and IRI models, respectively. It was further found that, EOF model performs 15%, and 44% better than NLRA, and IRI models, respectively, while NLRA is 25% better than IRI. On the other hand, results are also discussed referring to the background ionosphere represented by monthly median TEC (MM TEC) and statistics are provided. Moreover, strengths and weaknesses of each model are highlighted.     

电动静液作动器非线性框图建模与鲁棒控制方法

 阐述了机载电动静液作动器（EHA）的典型工作原理与结构特点,根据其元部件数学方程,建立非线性精确框图模型,完善了EHA补油回路和摩擦特性的描述。通过对系统阻尼、稳态误差及摩擦的仿真分析,设计了一种结合动态压力反馈与变增益控制策略的状态反馈控制器,改善了系统动、静态性能。鲁棒性测试结果反映了系统参数不确定性对性能的影响。     

Which solar EUV indices are best for reconstructing the solar EUV irradiance?

The solar EUV irradiance is of key importance for space weather. Most of the time, however, surrogate quantities such as EUV indices have to be used by lack of continuous and spectrally resolved measurements of the irradiance. The ability of such proxies to reproduce the irradiance from different solar atmospheric layers is usually investigated by comparing patterns of temporal correlations. We consider instead a statistical approach. The TIMED/SEE experiment, which has been continuously operating since February 2002, allows for the first time to compare in a statistical manner the EUV spectral irradiance to five EUV proxies: the sunspot number, the f10.7, Ca K, and Mg II indices, and the He I equivalent width.