Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

FET振荡器注入锁相伏特拉级数分析

应用伏特拉级数法分析了电容耦合ＦＥＴ振荡系统在外加信号下的注入锁定现象，推导出输出信号和注入锁定带宽表达式。与一般非线性系统分析方法相比，伏特拉级数法在建立好系统模型后只需进行代数运算，从而避开了求解非线性，非齐次高阶微分方程的复杂过程。     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

一种用于FM-FM遥测系统的测试信号源

介绍一种满足IRIG标准的FM- FM 调频信号源。根据试验结果,证明这种信号源不仅性能稳定,而且具有很好的灵活性。在各类符合IRIG标准FM- FM 体制遥测接收机的研制中具有一定的实用价值     

中山植物园植物定植图微机显示与管理系统

首先指出利用微机管理植物园取代落后的手工管理的意义。进而介绍了植物定植图微机显示与管理系统的具体实现途径，并描述了能将地图（含充色地图）、植物、宇符等录入。绘出，以及对植物进行检索显示等主要功能。     

电解催化氧化法处理L—乳酸精制残留液的初步研究

电解催化氧化法能很好地降解高浓度有机废水中的有机污染物 ,是一种高级氧化技术。针对L—乳酸精制残留液CODcr值约高达 14 0 0 0 0mg L的特点 ,本文对电解催化氧化处理L—乳酸精制残留液进行了初步研究。结果表明 ,在直流电解电流密度为 2 80A m2 时 ,电解 12小时 ,并消解 5天 ,CODcr的去除率为 98.5 7% ,脱色率为 5 2 .77%。     

有机高分子絮凝剂处理高浊度原水效果和机理研究

本文研究了有机高分子絮凝剂ＰＡＭ、ＣＴＡＢ及它们的复配ＰＡＭ＋ＣＴＡＢ处理高浊度原水的最佳实验条件、絮凝性能、效果和机理，为有机高分子絮凝剂的选择和管式絮凝器的研制提供了理论依据。     

均布压力作用各向异性矩形薄板大挠度问题

基于冯·卡门模型，选择中心挠度为摄动参数，利用摄动方法将正交异性矩形薄板大挠问题的非线性偏微分方程组逐级线性化，导出了各级摄动对应的几个线性偏微分方程组，然后再借助变分法求解，得到了均布载荷作用下正交异性矩形薄板的载荷-挠度曲线。