Impact of rain on wave retrieval from Sentinel-1 synthetic aperture radar images in tropical cyclones

The main objective of our work was to investigate the impact of rain on wave observations from C-band (~5.3 GHz) synthetic aperture radar (SAR) in tropical cyclones. In this study, 10 Sentinel-1 SAR images were available from the Satellite Hurricane Observation Campaign, which were taken under cyclonic conditions during the 2016 hurricane season. The third-generation wave model, known as Simulating WAves Nearshore (SWAN) (version 41.31), was used to simulate the wave fields corresponding to these Sentinel-1 SAR images. In addition, rainfall data from the Tropical Rainfall Measuring Mission satellite passing over the spatial coverage of the Sentinel-1 SAR images were collected. The simulated results were validated against significant wave heights (SWHs) from the Jason-2 altimeter and European Centre for Medium-Range Weather Forecasts data, revealing a root mean square error (RMSE) of ~0.5 m with a 0.25 scatter index. Winds retrieved from the VH-polarized Sentinel-1 SAR images using the Sentinel-1 Extra Wide-swath Mode Wind Speed Retrieval Model after Noise Removal were taken as prior information for wave retrieval. It was discovered that rain did indeed affect the SAR wave retrieval, as evidenced by the 3.21-m RMSE of SWHs between the SAR images and the SWAN model, which was obtained for the ~1000 match-ups with raindrops. The raindrops dampened the wave retrieval when the rain rate was < ~5 mm/hr; however, they enhanced wave retrieval for higher rain rates. It was also found that the portion of the rain-induced ring wave with a wave number > 0.05 rad/m (~125 m wavelength) was clearly observed in the SAR-derived wave spectra.     

晶体管h参数微变等效电路的研究

晶体管h参数微变等效电路是电子技术中求解低频、小信号放大电路常用的分析方法.本文通过具体分析,将模拟放大电路进行了新的分类,并且明确而系统地给出运用微变等效电路求解各类模拟放大电路动态指标Av、ri和γ0公式、解题难点及规律.     

数字多用表自动检定校准系统

本文介绍了一种数字多用表的自动检定校准系统的构成及软件设计 ,并对系统软件的设计方法 ,主要功能及主要特色进行了讨论。     

飞行末区目标可攻击性算法研究

分析了飞行器飞行末区存在的各种约束条件及其对飞行器飞行的影响，用最大爬升（下滑）半径约束法来代替过载约束进行飞行器纵向机动飞行的高度控制，并给出了在诸多约束条件下目标可攻击性的算法。最后利用等高线地形图进行了仿真验证，结果表明，该算法满足诸多约束要求，可用于工程应用。     

基于Matlab语言的系统可靠性仿真

Matlab是一种高性能数值计算语言 ,本文用Matlab语言编制系统可靠性仿真程序 ,并给出了具体实例。此方法比其他方法简单有效 ,可适用于复杂系统。     

基于蚂蚁算法的星上ATM交换结构

对于卫星ATM交换系统，星上ATM交换结构的设计是一个非常重要的部分。由于卫星通信具有带宽有限、时延受限、信道误码率高等特点，因而设计星上交换结构时必须尽可能降低交换时延，减少内部阻塞。为此，提出一种基于蚂蚁算法的星上ATM交换结构，并对此方案进行了分析和仿真。结果表明，该结构由于采用了蚂蚁算法和阻塞规避方案，有效改善了信元时延和信元丢失率等性能。     

一种新的六端口测量系统自校准方法

提出了一种新的六端口自校准方法.本方法从六端口相对功率理论出发,导出了六端口系统常数的自校准方程,给出了求解系统常数初值的方法,并利用梯度法对方程组求解,仿真结果表明用一个匹配负载、四个失配负载就可以解出系统常数.     

基于PETRI网的导弹控制系统故障诊断梯形图求解法

故障诊断是保证航空航天等大型复杂系统可靠性的重要措施，故障树为此提供了一种有效的方法，但故障树是一种系统静态行为的描述方法，如何描述系统状态的动态变迁过程成为人们追求的目标，本文在论述逻辑关系的PETRI网表示的基础上，提出了系统状态动态变迁过程的PETRI网模型梯形图求解算法，进而提出了基于PERTI网的故障诊断的梯形图求解方法，并用一实例说明了这一过程。     

光学中心偏测量仪软件研制

文章介绍了北京空间机电研究所自行研制的光学中心偏测量仪的软件设计思路、工作原理 ,并对一些关键技术进行了讨论。