遥测天线升降机构谐振频率测试方法的研究

研究设计一套遥测天线升降机构谐振频率的测试方法。经测试,遥测天线升降机构不会与天线发生共振,遥测天线谐振频率约为18Hz,升降机构垂直方向的最低谐振频率为12.82Hz,侧向方向的最低谐振频率为25.64Hz,前后方向的最低谐振频率为38.46Hz。     

散射对高温气体-碳黑颗粒混合物辐射传输的影响

基于全光谱k分布(Full spectrum k distribution,FSK)模型、MIE理论和有限体积法(Finite volume method,FVM),构建了均温、均质辐射参与性气体-碳黑颗粒混合物介质热辐射传输模型,并分析了碳黑不同尺寸、不同体积浓度以及介质不同路径长度和不同温度条件下,因忽略碳黑颗粒散射所导致的介质热辐射传输特性(如辐射热流、辐射源项)的计算误差。研究结果表明:体积分数不变,增大粒径,计算误差呈现出先增大后减小的趋势;数密度不变,增大粒径,或者粒径不变,增大体积分数,均将使得计算误差相应增大;粒径、体积分数不变,增大路径长度,或者升高介质温度,均将增大计算误差。通常对于含有大颗粒、高碳黑浓度的辐射参与性气体-碳黑颗粒混合物介质,碳黑颗粒散射不能忽略。     

Active Design Method of Tooth Profiles for Cycloid Drive Based on Meshing Efficiency

An active design method of tooth profiles for cycloid gears based on their meshing efficiency is proposed.This method takes the meshing efficiency as one of the design variables to determine the tooth profiles. The calculation method for the meshing efficiency of planetary transmission is analyzed and the equation of the meshing efficiency is deduced. Relationships between the meshing efficiency,the radius of the pin wheel and the eccentric distance are revealed. The design constraint quations and the strength constraint quations are deduced. On the basis of this,a design procedure is laid out. Some examples using different input parameters are conducted to demonstrate the feasibility of the approach. A dynamic simulation of the rigid-flexible coupling of cycloid gears is also presented. The results show that the proposed design method is more flexible to control the tooth profiles by changing the input values of the transmission efficiency.     

弱引力下小行星动量驱动机器人的可控跳跃行为

以小行星表面着陆探测为背景,提出一种动量驱动机器人(MoRo)以满足弱引力复杂环境下的探测需求。该机器人利用弱引力环境下的摩擦和碰撞特性,通过主动辨识环境参数,规划和控制动量轮以产生期望的驱动力矩,完成可控性跳跃及腾空后的稳定拍照等任务。首先,基于MoRo的动量轮刹车机构特性,分析了MoRo在弱引力环境下的跳跃机理并对其跳跃方式进行了规划;接着考虑动量轮驱动机构三闭环伺服系统的非线性特性,基于Herze碰撞模型和Karnopp摩擦模型建立了MoRo在小行星表面的跳跃行为动力学模型;其次,使用机器学习算法建立环境参数和MoRo运动的函数关系,并基于环境参数规划动量轮转速实现跳跃距离和腾空高度的可控。最后,通过数值仿真校验了MoRo跳跃规划方法和控制方法的可行性。     

Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

基于相对最值点的最小二乘直线检测方法

为了解决传统目标检测中遇到的检测速度慢、精度低等问题，本文提出一种新的图像特征——相对最值点，并依据相对最值点提出一种新的最小二乘直线检测的方法。该方法首先搜索Canny边缘的闭合包络，并寻找闭合包络的相对最值点。包络上相邻相对最值点之间长度满足阈值要求的即为疑似直线的两端点，进而利用最小二乘拟合方法获得该疑似直线的拟合方差，最后利用拟合方差与拟合直线长度之比作为直线判定的标准用来检测出图像中的直线。实验表明，本方法与传统方法如PPHT直线检测、LSD直线检测方法等相比，检测直线的精度更高，检测速度更快。     

复合导引头目标信息融合抗干扰技术研究

复合导引头由微波制导至红外制导的过程中,受干扰条件的影响,有可能出现错误交班。为了提高导引头应对干扰的能力,设计了一种微波/红外目标信息融合抗干扰方法,该方法利用微波与红外目标信息进行关联度检测,对跟踪微波与红外运动的趋势进行在线实时判断,及时做出干扰误交班判定。在进行了干扰误交班的情况下,MATLAB数字仿真结果表明,该算法能够准确有效地给出干扰误交班判断,从而保证了在干扰环境下对目标跟踪的稳定性。