Ground Compatibility Tests for Gravity Measurement of SELENE: Accuracies of Two- and Four-Way Doppler and Range Measurements

The Japanese lunar mission Selenological and Engineering Explorer (SELENE) was launched in September 2007 and continued its mission until June 2009, when the main orbiter impacted with the surface of the Moon. SELENE consisted of three satellites: Main, Rstar, and Vstar. Rstar’s tasks were to forward up-link signals from the Usuada Deep Space Center (UDSC) to Main, and to down-link returning signals from Main to UDSC. We refer to this tracking sub-system as a four-way Doppler measurement. In contrast, conventional tracking systems between Rstar and UDSC as well as between Main and ground stations are referred to as two-way Doppler and range measurements. Using Main and Rstar, we successfully observed the gravity field over the farside of the Moon. Because four-way Doppler measurements via a relay sub-satellite were a fundamental experiment in space for Japanese space agencies, compatibility of radiometric instruments onboard Main and Rstar to UDSC were carefully examined at the UDSC using components manufactured for flight models. These tests not only proved the feasibility of the four-way Doppler measurements but also provided biases and variations of the four-way Doppler and two-way Doppler and range measurements that were later taken into account during the processing of tracking data and the analysis of the lunar global gravity field.     

Ballooning activities in Japan

The Scientific Balloon Center of ISAS/JAXA has carried out two balloon campaigns at Sanriku, Iwate, Japan every year. Ten to twelve balloon vehicles are launched annually for scientific and engineering experiments. Since 2005, a Brazilian balloon campaign has also been conducted in cooperation with INPE. In the 2006 Brazilian campaign, large and heavy payloads up to 1500 kg for astronomy will be launched. New generation balloons, such as super-pressure balloons and high-altitude balloons with ultra-thin films, are being developed. The current status and prospect of the Japanese scientific ballooning are discussed.     

Space escalator,semi-perpetual motion in space

A novel orbital transfer system using the mutual action-reaction of two spacecraft as the main propulsive force is proposed. A set of space platforms which are deployed on circular orbits of various altitude and have mobility to transfer to other orbits by themselves can work on a very little propellant.     

Capability for ozone high-precision retrieval on JEM/SMILES observation

We estimate the capability of ozone (O₃) retrieval with the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) instrument attached to the Exposed Facility of the Japanese Experiment Module (JEM) on the International Space Station (ISS). SMILES carries a 4-K mechanical refrigerator to cool superconducting devices in space. Since SMILES has high sensitivity thanks to the superconducting receiver, it is expected that SMILES has ability to retrieve O₃ profiles more precisely than the previous millimeter–submillimeter limb measurements from satellites.     

Nuclear fragmentation database for GCR transport code development

A critical need for NASA is the ability to accurately model the transport of heavy ions in the Galactic Cosmic Rays (GCR) through matter, including spacecraft walls, equipment racks, etc. Nuclear interactions are of great importance in the GCR transport problem, as they can cause fragmentation of the incoming ion into lighter ions. Since the radiation dose delivered by a particle is proportional to the square of (charge/velocity), fragmentation reduces the dose delivered by incident ions. The other mechanism by which dose can be reduced is ionization energy loss, which can lead to some particles stopping in the shielding. This is the conventional notion of shielding, but it is not applicable to human spaceflight since the particles in the GCR tend to be too energetic to be stopped in the relatively thin shielding that is possible within payload mass constraints. Our group has measured a large number of fragmentation cross sections, intended to be used as input to, or for validation of, NASA’s radiation transport models. A database containing over 200 charge-changing cross sections and over 2000 fragment production cross sections has been compiled. In this report, we examine in detail the contrast between fragment measurements at large acceptance and small acceptance. We use output from the PHITS Monte Carlo code to test our assumptions using as an example ⁴⁰Ar data (and simulated data) at a beam energy of 650 MeV/nucleon. We also present preliminary analysis in which isotopic resolution was attained for beryllium fragments produced by beams of ¹⁰B and ¹¹B. Future work on the experimental data set will focus on extracting and interpreting production cross sections for light fragments.     

Influence of Patch Side on One-Dimensional Unsteady of Heat-Ray Absorbing Film Thermal Stresses in Window Glass

Heat-ray absorbing film is used to be bonded on the existing sheet glasses of the windows. It is effective for air-conditioning energy saving against the global warming, because it absorbs heat-ray in the thin film and de- creases the incoming heat-ray into the room. On the other hand, the sheet glasses increase the temperature at the surface which the sheet is bonded and sometimes yield heat cracks by thermal stresses. It is important to know the state of thermal stresses accurately in order to develop the heat-ray absorbing film with higher performance and without heat cracks. In this paper, the analysis model is treated as the two-layer plate of the conventional soda sheet glass and the heat-ray absorbing film with different absorptivities. The unsteady temperature and thermal stresses are analyzed and calculated numerically. The influence of the patch side, which the heat-ray absorbing film is bonded at the exterior side or the interior side, on the heat-ray absorbing performance and the thermal stresses is discussed. It is found that the alternative patch side has no effect on the heat-ray absorbing performance and that the patch side is recommended to be interior side from a view point of decreasing thermal stresses against the heat crack of glasses.     

A simulation study for anticipated accuracy of lunar gravity field model by SELENE tracking data

Results of numerical simulations are presented to examine the global gravity field recovery capability of the Japanese lunar exploration project SELENE (SELenological and ENgineering Explorer) which will be launched in 2007. New characteristics of the SELENE lunar gravimetry include 4-way satellite-to-satellite Doppler tracking of main orbiter and differential VLBI tracking of two small free-flier satellites. It is shown that the proposed satellite constellation will provide the first truly global satellite tracking data coverage. The expected results from these data are; (1) drastic reduction in far-side gravity error, (2) estimation of many gravity coefficients by the observation, not by a priori information, and (3) one order of magnitude improvement over existing gravity models for low-degree field.     

Studying the Lunar Ionosphere with SELENE Radio Science Experiment

Radio occultation observations of the electron density near the lunar surface were conducted during the SELENE (Kaguya) mission using the Vstar and Rstar sub-satellites. Previous radio occultation measurements conducted in the Soviet lunar missions have indicated the existence of an ionosphere with peak densities of several hundreds of electrons per cubic centimeters above the dayside lunar surface. These densities are difficult to explain theoretically when the removal of plasma by the solar wind is considered, and thus the generation mechanism of the lunar ionosphere is a major issue, with even the validity of previous observations still under debate. The most serious error source in the measurement is the fluctuation of the terrestrial ionosphere which also exists along the ray path. To cope with this difficulty, about 400 observations were conducted using Vstar to enable statistical analysis of the weak signal of the lunar ionosphere. Another method is to utilize Vstar and Rstar with the second one being used to measure the terrestrial ionosphere contribution. The observations will establish the morphology of the lunar ionosphere and will reveal its relationship with various conditions to provide possible clues to the mechanism.     

Overview of Differential VLBI Observations of Lunar Orbiters in SELENE (Kaguya) for Precise Orbit Determination and Lunar Gravity Field Study

The Japanese lunar explorer SELENE (Kaguya), which was launched on September 14th, 2007, was the target of VLBI observations over the period November 2007 to June 2009. These observations were made in order to improve the lunar gravity field model, in particular the lower degree coefficients and the model near the limb. Differential VLBI Radio sources, called VRAD instruments, were on-board the subsatellites, Rstar (Okina) and Vstar (Ouna), and the radio signals were observed by the Japanese VERA (VLBI Exploration of Radio Astrometry) network, and an international VLBI network. Multi-frequency and same-beam VLBI techniques were utilized and were essential aspects of the successful observing program. Multi-frequency VLBI was employed in order to improve the accuracy of the orbit determination obtained from the phase delay from the narrow-band satellite signals, while the same-beam VLBI method was used to resolve the cycle ambiguity which is inherent in the multi-frequency VLBI method. The observations were made at three S-band frequencies (2212, 2218 and 2287 MHz), and one X-band frequency (8456 MHz). We have succeeded in correlating the recorded signals from Okina/Ouna, and we obtained phase delays with an accuracy of several pico-seconds at S-band.