CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

Sumbandilasat—An operational technology demonstrator

Technology advances in sensor, digital technology and a standardised modular satellite bus are enabling a new generation of 80 kg micro-satellites with a better than 6.5 m GSD multi-spectral performance, to be specified, built and deployed with a dedicated launch within 12 months. The result of the standardised modular bus is lower cost, higher reliability and fast deployment. Operational remote sensing with a micro-satellite is thus within reach of individual organisations for dedicated missions. Sumbandilasat (pioneer in the Venda language) is a second generation satellite technology building on the expertise obtained in the Sunsat small satellite programme. The components used to build Sumbandilasat are the result of a technology development program of more than 3 years. Sumbandilasat is an operational technology demonstrator with more than 90% newly developed or improved subsystems and a compact refractive imager as a precursor to the MSMISat satellite with the same multi-spectral band set. The scalable, standardised modular satellite bus architecture enables satellites with a mass of 80–450 kg to be adapted to the specific mission requirements with minimum new engineering effort.     

Contingency and recovery options for the European Student Moon Orbiter

This paper presents an overview of the analysis performed on the lunar orbit and some of the possible contingencies for the European Student Moon Orbiter (ESMO). Originally scheduled for launch in 2014 –2015 as a piggyback payload, it was the only ESA planned mission to the Moon. By way of a weak stability boundary transfer, ESMO is inserted into an orbit around the Moon. Propellant use is at a premium, so the operational orbit is selected to be highly eccentric. In addition, an optimization is presented to achieve an orbit that is stable for 6 months without requiring orbit maintenance. A parameter study is undertaken to study the sensitivity of the lunar orbit insertion. A database of transfer solutions across 2014 and 2015 is used to study the relation between the robustness of weak capture and the planetary geometry at lunar arrival. A number of example recovery scenarios, where the orbit insertion maneuver partially or completely fails, are also considered.     

On uncertainties in carbon flux modelling and remotely sensed data assimilation: The Brasschaat pixel case

Uncertainty on carbon fluxes is determined by the uncertainties of ecosystem model structure, data and model parameter uncertainties and the temporal and spatial inaccuracy of the input data retrieval. The objective of this paper is to understand the error propagation and uncertainty of evaporative fraction (EF), soil moisture content (SMC) and water limited net ecosystem productivity (NEP). In this respect, C-Fix and spaceborne remote sensing are used for the ‘Brasschaat’ pixel. A simple model based on error theory and a Monte-Carlo approach are used. Different error scenarios are implemented to assess input uncertainty on EF, SMC and NEP as estimated with C-Fix.     

Cubesat solar sail 3-axis stabilization using panel translation and magnetic torquing

A Cubesat mission with a deployable solar sail of 5 meter by 5 meter in a sun-synchronous low earth orbit is analyzed to demonstrate solar sailing using active attitude stabilization of the sail panel. The sail panel is kept parallel to the orbital plane to minimize aerodynamic drag and optimize the orbit inclination change caused by the solar pressure force normal to the sail surface. A practical control system is proposed, using a combination of small 2-dimensional translation of the sail panel and 3-axis magnetic torquing which is proved to have sufficient control authority over the gravity gradient and aerodynamic disturbance torques. Miniaturized CMOS cameras are used as sun and nadir vector attitude sensors and a robust Kalman filter is used to accurately estimate the inertially referenced body rates from only the sun vector measurements. It is shown through realistic simulation tests that the proposed control system, although inactive during eclipse, will be able to stabilize the sail panel to within ±2° in all attitude angles during the sunlit part of the orbit, when solar sailing is possible.     

Chemical and biological evolution in space

Astronomical infrared spectra are used to confirm the existence of complex organic molecules produced by ultraviolet photoprocessing of interstellar grain mantles. This material is shown to be the major component of the interstellar grains between the sun and the galactic center and, by inference, constitutes more than 10 million solar masses — or close to one part in a thousand of the entire mass of the milky way galaxy. It may be demonstrated that the primitive chemistry of the earth's surface was dominated by these extraterrestrial molecules after aggregated into comets if the rate of comet impacts with the earth was comparable with that required to account for the extinction of species over the past 300 million years.

Ultraviolet irradiation of bacterial spores has been studied for the first time under simulated interstellar conditions. The inactivation time predicted for the less dense regions of space is at most several hundred years. Within molecukar clouds it is shown on theoretical and experimental grounds that this t the estimated cloud. However survival of spores during their initial exposure to the solar ultraviolet presents a problem for panspermia because it requires that in the process of ejection from the earth's surface they must be enclosed within a cocoon (or mantle) of ultraviolet absorbing material of 0.6 μm thickness. Thus, although panspermia can not be rejected on the basis of lack of interstellar survival there may remain insurmountable obstacles to its occuring because of the very special protective shield requirements during ejection from its planetary source.     

Considerations in the design and deployment of flexible booms for a solar sail

The majority of solar sailing missions utilise semi-rigid boom technology but this places limits on the possible size of the sail. Practical large sails may be constructed using flexible booms on a spinning satellite. The dynamics of the deployment of long flexible booms are investigated and limiting parameters discussed. Deployment strategies are proposed utilising active deployment and a means of passive deployment which requires no direct control of the deployment process. Practical insights into the design, testing and use of a flexible boom solar sail deployment mechanism is presented based on small scale experimental testing, discussing aspects such as boom winding and balanced deployment. Three novel deployment mechanism design concepts are developed; two passive mechanisms using rotational damping to retard the boom deployment and one active concept takes advantage of the forces produced by the spinning nature of the satellite to develop a compact deployment mechanism.