Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

Series of radiation-hardened, high efficiency converters for high voltage bus

A review of common switching techniques for dc/dc power conversion is presented. The evolution of the forward converter is discussed, leading naturally to the introduction of the double forward converter. Technical details for a series of radiation-hardened converters are then provided. This series was designed for space power management and distribution (PMAD) applications. The successful development of the PMAD converter demonstrated the viability of high voltage bus.     

高燃速丁羟推进剂配方研究

通过多种途径的试验,对高燃速丁羟推进剂配方进行了研究.试验结果表明,采用超细防结块氧化剂和液固组合燃速催化剂能使推进剂的燃速达到70mm/s以上(在6.864Mpa压强下);采用组合工艺助剂可改善推进剂工艺性能.本推进剂燃烧稳定,压强指数和温度敏感系数较低,力学性能良好,为高燃速推进剂的研制奠定了良好的基础.     

一种基于FPGA的超高速FFT处理器设计

通过采用合并字节的预整序单元、全并行的基4运算单元、首级存储单元外置的移位延时整序结构和逐级 扩充字长的定点算法,用FPGA实现了一个超高速的基4全并行流水线FFT处理器;在66MHz时钟频率下,处理速度可 达到256K点／ms。     

振动对空间光通信系统误码率影响的分析

在空间光通信系统中，由于卫星平台的振动，使得光发射机发生振动，从而对通信系统的误码率产生影响，本文针对光射光束为高斯光束时，振动对误码率的影响问题进行研究。结果表明，在振动时不仅振幅影响着误码率，而且波长也对误码率有影响，但通信距离对误码率的影响不大，一般可以忽略。     

压电驱动自耦合射流流动特性实验

为了研究压电驱动狭缝喷口自耦合射流的流动特性,采用PIV、热线风速仪测试手段,对自耦合射流激发器在不同激励因素下的流场和速度场分布进行了实验和分析.结果显示,自耦合射流在狭缝出口处产生了反向涡对,随着自耦合射流的发展,射流呈现出在喷口短轴方向急剧向两侧扩展、而在喷口长轴方向先收缩后缓慢扩展的流动特征;自耦合射流的速度分布在法线方向呈现先上升后下降的趋势,在z/b=10左右速度达到最大值;在射流展向上,短轴方向速度呈规律的对称分布和速度自模的特征,而长轴方向速度近喷口区域呈现马鞍状分布,随着法向距离增加这种趋势消失.研究中发现,激发器存在两个谐振频率,在谐振频率激发下自耦合射流的速度和涡量比较大.与常规射流相比,自耦合射流显示出了独特的流动特性.     

垫层拉深工艺的试验研究

本文采用试验方法研究了聚乙烯膜在坯料与凹模表面之间的润滑效果，测定了不同润滑方式，ＳＰＣＣ和Ｌ４Ｍ板材的极限拉深系数，分析了采用了聚乙烯膜为润滑的润滑机理。结果表明，垫层拉深工艺能够有效地改善拉深件的表面质量，降低极限拉深系数，使变形程度得到提高。该研究结果对于改善拉深件的表面质量和提高变形程序，具有积极意义。     

月食过程月表太阳辐照和温度变化模拟

月食对月球轨道探测器的温度有重要的影响,分析月食时月表的太阳辐照和温度,具有重要意义。文章给出了通用的月表温度模型和月食时月表太阳辐照模型,根据某次月食的天文参数,用太阳辐照模型可求出月表任一点在月食时的太阳直接辐照变化过程,代入温度模型可求出任一点的温度变化过程。此模型和方法可用于对任何一次月食的分析,并以2007年8月28日的月食为例,模拟了该次月食的表面太阳直接辐照和温度的变化过程。     

中低轨道卫星星座间的激光链路

阐述在中低轨道卫星星座全球通讯网络中应用的激光星间链路与在中继星间应用的激光星间链路相比，所具有的明显的优势。同时给出了应用于小卫星上的小光学用户终端的基本组成，并指出了当前在中低轨道卫星星座激光星间链路研究中所应当进行的主要研究方面。