Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

Zenith Pass Problem of Inter-satellite Linkage Antenna Based on Program Guidance Method

While adopting an elevation-over-azimuth architecture by an inter-satellite linkage antenna of a user satellite, a zenith pass problem always occurs when the antenna is tracing the tracking and data relay satellite （TDRS）. This paper deals with this problem by way of, firstly, introducing movement laws of the inter-satellite linkage to predict the movement of the user satellite antenna followed by analyzing the potential pass moment and the actual one of the zenith pass in detail. A number of specific orbit altitudes for the user satellite that can remove the blindness zone are obtained. Finally, on the base of the predicted results from the movement laws of the inter-satellite linkage, the zenith pass tracing strategies for the user satellite antenna are designed under the program guidance using a trajectory preprocessor. Simulations have confirmed the reasonability and feasibility of the strategies in dealing with the zenith pass problem.     

Observations of TEC Depletion,Periodic Structure of TEC,ROTI and Scintillation Associated with ESF Irregularities over South China

The observations of Global Positioning System (GPS) scintillation, Total Electron Content (TEC) depletion, the periodic structure of TEC and Rate of TEC Index (ROTI) over south China were presented. Data were collected from GPS observations at stations of Shenzhen and Guangzhou from 2011 to 2012. This study reported that the ratio of simultaneous occurrences of TEC depletions with strong scintillations was higher than that of TEC depletions with weak scintillations in vernal and autumnal equinoxes of 2011 over South China. The number of the periodic structures of TEC with depletion contained was greater than that with no depletion contained corresponding to strong scintillations. The structure of the slab of plasma irregularities could be responsible for the simultaneous occurrences of TEC depletion with strong scintillations and ROTI. Before and during the occurrences of strong scintillation, there was Large-Scale Wave Structure (LSWS) which provided the seed ionization perturbation to trigger ESF irregularities and contributed to the periodic structure of TEC.      

Aerodynamic optimization design of general parameters for cycloidal propeller in hover based on surrogate model

A surrogate-model-based aerodynamic optimization design method for cycloidal propeller in hover was proposed, in order to improve its aerodynamic efficiency, and analyze the basic criteria for its aerodynamic optimization design. The reliability and applicability of overset mesh method were verified. An optimization method based on Kriging surrogate model was proposed to optimize the geometric parameters for cycloidal propeller in hover with the use of genetic algorithm. The optimization results showed that the thrust coefficient was increased by 3.56%, the torque coefficient reduced by 12.05%, and the figure of merit (FM) increased by 19.93%. The optimization results verified the feasibility of this design idea. Although the optimization was only carried out at a single rotation speed, the aerodynamic efficiency was also significantly improved over a wide range of rotation speeds. The optimal configuration characteristics for micro and small-sized cycloidal propeller were: solidity of 0.2-0.22, maximum pitch angle of 25°-35°, pitch axis locating at 35%-45% of the blade chord length.      

关于不符合项整改的思考

在解释纠正、纠正措施定义的基础上，阐明了受审核方对不符合项整改的步骤和方法以及审核组长验证整改效果的要点，并指出了对已通过整改符合要求的“不符合项”说成已“关闭”的术语应当述为“归零”更为确切。     

Influence of blade negative twist on aerodynamic performance of cycloidal propeller

In order to improve the analysis accuracy of the influence of shape parameters on the aerodynamic performance of cycloidal propeller, a set of CFD methods suitable for the simulation of the cycloidal propeller flow field based on the dynamic overset mesh and Unsteady Reynolds time average method equation were established. The characteristics of the spanwise lift distribution and surface pressure distribution in case of different negative twist were provided. The influence of the negative twist on the aerodynamic performance of cycloidal propeller was emphasized. The results showed that, the change of negative twist caused the change of azimuth for cycloidal propeller lift. The larger the absolute value of negative twist, the lower the figure of merit of the cycloidal propeller; the smaller the negative twist, the more gentle the instantaneous aerodynamic fluctuation; the influence mechanism of negative twist on the aerodynamic performance of cycloidal propeller was generated from changing the non-uniform distribution of the cycloidal propeller''s effective angle of     

Porous Alumina Ceramics Fabricated by Spark Plasma Sintering

Porous alumina of regular spherical particles was fabricated with the spark plasma sintering (SPS) and then compared to those ob-tained through conventional hot pressing (HP). The effects of the parameters of the heating process on porosity were also investigated. Microstructural studies suggest that porous ingots including regular pores be made out of regular spherical alumina particles due to the close sphere packages. A comparative study on the relative necks of the specimens produced by SPS and HP indicates an enhancement of neck growth with SPS. Contrasting the theoretical values to the experimental results over the relative necks indicates that a proper relationship between the relative necks and the porosity can be established by a sintering model.     

浅谈民航电子商务及其信息安全

InformationSecurityinE－commerce人类经济活动的全球化在过去的几十年进程缓慢。随着信息技术的发展，架构于互联网网络的商务活动即电子商务（E－commerce）得以普及，使经济全球化是加速发展之势，而经济全球化又刺激着电子商务加速发展。电子商务是个人、公司或他们之间利用诸如互联网（Internet）、企业内部网（Intranet）、在线服务（On－lineservices）等提供的媒介从事商务活动的一种方式。信息产业部副部长吕新奎在“第二届信息化法制建设研讨会”上指出，21世纪电子商务将给各国和世界经济带来巨大变革共产生深远影响，从而成…     

Distributed coordinated control scheme of UAV swarm based on heterogeneous roles

This paper proposes a new distributed coordinated control scheme based on heterogeneous roles for Unmanned Aerial Vehicle(UAV) swarm to achieve formation control. First, the framework of the distributed coordinated control scheme is designed on the basis of Distributed Model Predictive Control(DMPC). Then, the effect of heterogeneous roles including leader, coordinator and follower is discussed, and the role-based cost functions are developed to improve the performance of coordinated control for...