翻转课堂融入线上教学的应用探索——以“Photoshop图像处理”课程为例

在新的教学环境下,开展翻转课堂教学面临着巨大的挑战。结合教学实践,分析实施翻转课堂教学存在的问题,在教学设计、教学形式和教学评价等方面提出相应的对策。大部分学生对翻转课堂内容及形式总体满意,但课程设计方面存在一些不足,需在教学实践中不断完善。     

基于EM‑EKF的深空光学自主导航系统光轴偏差补偿算法

在深空探测任务中,光学自主导航的精度受导航敏感器件安装精度的影响较大。提出了一种基于期望最大化-扩展卡尔曼滤波(EM-EKF)的光学自主导航系统光轴偏差补偿算法。算法基于条件概率的思想,预先设定状态变量和观测量的统计特性参数,通过不断地最大化条件期望,得到出现概率最大的状态变量估值和光轴偏差参数估值。该算法可分为4步:EKF、固定区间平滑、求解条件期望和期望最大化,不断迭代即可得到光轴偏差估计值。以火星探测近火段为例进行仿真验证,经光轴偏差补偿后,导航精度由100 km提升至20 km以内。     

考虑星历误差的天文测角/时间延迟量测组合导航方法

基于太阳震荡的时间延迟是一种新型天文导航量测量，可以提供探测器相对反射天体的距离信息，与星光角距量测量结合，可以提高导航性能。然而，星光角距量测模型与时间延迟量测模型均含有火卫一相对火星的位置矢量，火卫一的星历误差将影响导航精度。针对这一问题，提出了一种基于在线估计的天文测角/时间延迟量测组合导航方法，建立了包含火卫一位置及速度的状态模型，利用星光角距及时间延迟量测量同时对火卫一的位置和速度进行在线估计，仿真结果表明，提出的方法可以有效抑制火卫一星历误差对组合导航精度的影响，为探测器提供高精度的自主导航信息。     

先进战斗机过失速机动大气数据融合估计方法

可控的过失速机动是先进战斗机超机动性能的重要标志，飞机飞行包线的扩大已超出传统的大气数据系统测量范围，可靠的迎角、侧滑角、总压、静压等飞行大气数据是制约先进战斗机过失速机动中飞行控制的关键因素。以中国推力矢量验证机为对象，基于过失速机动飞行试验的数据，开展大气参数估计与验证研究。结合过失速机动的时间与空间特性，研究了基于风速、地速、空速矢量和惯性姿态、导航参数的大气参数融合计算方法；针对过失速大迎角状态下飞机周围气流非定常、模型非线性导致的融合大气参数误差的复杂特性，进一步构建深度神经网络，对机动状态融合迎角、侧滑角的强非线性误差进行拟合。仿真和飞行试验表明：该方法可在大迎角飞行状态下实现主要大气参数的融合估计，过失速机动过程中融合迎角误差优于2.3°，融合得到的大气参数可为过失速大迎角机动飞行控制提供可靠的大气参数状态反馈。     

卷积神经网络和峭度在轴承故障诊断中的应用

针对传统智能诊断方法依靠专家知识和人工提取数据特征工作量大的问题,结合深度学习方法在特征提取和处理大数据方面的优势,研究了一种基于卷积神经网络和振动信号峭度指标的滚动轴承故障诊断方法。该方法将深度学习应用于轴承故障诊断,提取滚动轴承正常状态、内圈故障、外圈故障和滚动体故障4种状态的振动信号,将振动信号分段处理得到峭度指标,使用数据到图像的转换方法将峭度指标转换为灰度图,送入卷积神经网络模型完成故障分类。在进行滚动轴承故障诊断的实验时,所提的模型诊断准确率达到99.5%,高于传统支持向量机(SVM)算法的95.8%。      

一种基于Deep-GBM的航空发动机中介轴承故障诊断方法

针对航空发动机中介轴承故障信号难于识别的特点，提出了一种深度梯度提升模型（Deep-GBM）对振动信号特征进行逐层学习以提高分类模型的准确率。开展某型航空发动机中介轴承故障模拟实验，并采用经验模式分解(EMD)方法对采集的振动信号进行分解，提取内蕴模式函数(IMF)分量非线性动力学参数样本熵作为原始故障特征。采用Deep-GBM对中介轴承内环故障、内环和滚动体综合故障、正常、滚棒剥落、滚棒划伤五种不同状态进行识别。实验结果表明，所提出的Deep-GBM故障诊断准确率达到87%，相对于传统的机器学习模型准确率最高提升了28%，并具有良好的泛化能力。      

基于YOLO智能网络的红外弱小多目标检测技术

复杂背景下的红外弱小多目标检测是红外目标检测的难点,现有算法的稳健性难以满足实际弹载应用需求。针对弹载环境下的红外场景图像开展了基于典型深度学习网络模型的目标检测应用研究,提出一种基于YOLO(you only look once)网络的智能目标检测方法,通过高维特征学习表征和推理实现红外弱小多目标检测。采用传统的模板匹配算法和YOLO深度学习算法进行识别性能对比分析,验证了YOLO网络在红外弱小多目标检测方面的良好性能。实验结果表明:YOLO算法的检测概率可达92.2%,平均检测精度为0.844,与传统的模板匹配方法相比,YOLO具有明显的优势。     

Comparison of observed ionospheric vertical TEC over the sea in Indian region with IRI-2016 model

The vertical ionospheric TEC values obtained from GAGAN grid based ionospheric delay correction values over the sea in the Indian equatorial region have been compared with the corresponding values derived from the International Reference Ionosphere model, IRI-2016. The objective of this work is to study the deviation of the vertical TEC derived from the IRI model from ground truths over the sea for different conditions. This will serve the basic intention of assessing the candidature of the IRI model as an alternative ionospheric correction model in navigation receivers in terms of accuracy. We have chosen different solar activity periods, seasons, geomagnetic conditions, locations etc. for our comparison and analysis. The TEC values by the IRI-2016 were compared with the actual measured values for the given conditions and errors were obtained. The measured vertical TEC values at the ionospheric grid points were derived from the GAGAN broadcast ionospheric delay data and used as reference. The IRI model with standard internal functions was used in estimating the TEC at the same ionospheric grid points. The errors in the model derived values are statistically analysed. Broadly, the results show that, for the Indian sector over the sea, the IRI model performs better on quiet days in off equatorial regions, particularly in the northern region. The overall performance degrades for other conditions with the model generally underestimating the true TEC values and most severely in the equatorial region. The performance is worst in this region for the disturbed days of the equinoctial period. The comparison study is also done with the TEC data measured directly by dual frequency GPS receivers. The results were found to be in general agreement with those obtained by comparing the model with GAGAN broadcast data as reference. This study will be useful in considering the IRI-2016 model for real time estimates of TEC as an alternative to the current parametric model in a satellite navigation receiver in absence of other options.     

A modern robust approach to remotely estimate chlorophyll in coastal and inland zones

The chlorophyll concentration of a water body is an important proxy for representing the phytoplankton biomass. Its estimation from multi or hyper-spectral remote sensing data in natural waters is generally achieved by using (i) the waveband ratioing in two or more bands in the blue-green or (ii) by using a combination of the radiance peak position and magnitude in the red-near-infrared (NIR) spectrum. The blue-green ratio algorithms have been extensively used with satellite ocean color data to investigate chlorophyll distributions in open ocean and clear waters and the application of red-NIR algorithms is often restricted to turbid productive water bodies. These issues present the greatest obstacles to our ability to formulate a modern robust method suitable for quantitative assessments of the chlorophyll concentration in a diverse range of water types. The present study is focused to investigate the normalized water-leaving radiance spectra in the visible and NIR region and propose a robust algorithm (Generalized ABI, GABI algorithm) for chlorophyll concentration retrieval based on Algal Bloom index (ABI) which separates phytoplankton signals from other constituents in the water column. The GABI algorithm is validated using independent in-situ data from various regional to global waters and its performance is further evaluated by comparison with the blue-green waveband ratios and red-NIR algorithms. The results revealed that GABI yields significantly more accurate chlorophyll concentrations (with uncertainties less than 13.5%) and remains more stable in different waters types when compared with the blue-green waveband ratios and red-NIR algorithms. The performance of GABI is further demonstrated using HICO images from nearshore turbid productive waters and MERIS and MODIS-Aqua images from coastal and offshore waters of the Arabian Sea, Bay of Bengal and East China Sea.     

微分法在定位误差分析与计算中的应用

介绍了微分法分析计算定位误差的原理和适用范围,通过生产实例分析,证明了该方法在解决多误差因素定位误差分析与计算中的简便与快捷,从而有效简化了复杂定位方案定位误差的分析与计算,提高了夹具的设计效率。