A novel satellite image encryption algorithm based on hyperchaotic systems and Josephus problem

With the rapid growth of the number of Earth observation satellite (EOS) supporting critical applications, it is required to improve the security techniques to protect the sensitive data and images during the transmission between the satellites and the ground stations. This paper introduces a new satellite image encryption algorithm based on the Linear Feedback Shift Register (LFSR) generator, SHA 512 hash function, hyperchaotic systems, and Josephus problem. LFSR generates a matrix that is used to construct the 512-bits value of the hash function. These bits are used to set the initial values and parameters of the proposed encryption algorithm. Firstly, the six dimensions (6-D) hyperchaotic system is divided into three parts, where every two equations are considered as one part. Secondly, the 1-D hyperchaotic logistic-tent system is considered as the controller to select one part. The selected part is used to generate a matrix that is XORed with the original image. Thirdly, the scrambling operation by Josephus sequences is applied to the output of the previous step by scrambling the rows and the columns according to the selected part to produce the pre-encrypted image. Finally, if the number of iterations is less than the required number which is considered as a parameter of the secret key, the previous operations will be repeated in the pre-encrypted image; otherwise, the pre-encrypted image is considered as the final cipher image. Experimental and analyses results show that the proposed algorithm has good performance in terms of high level of security, large enough key-space, tolerance to Single Event Upsets (SEU) as well as low time complexity.     

RN-FD型固体氡气源的稳定性及应用分析

对测氡仪器进行精确校准是氡测量工作中的重要环节,固体氡气源的稳定性、可靠性在校准中则显得至关重要。本文通过分析RN-FD型固体氡气源对闪烁室K值的稳定性实验结果,认为:RN-FD型固体氡气源标称的浓度值与实际浓度值不一致,标称浓度值只是理论浓度值而不是实际浓度值,需重新刻度才能使用;RN-FD型固体氡气源抽气循环时间不同则浓度不同,但抽气循环时间固定,观测结果比较稳定;对于没有α检查源的台站,RN-FD型固体氡气源可用于氡观测仪器坪区检查。     

Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

利用微波探测仪(ATMS)对在轨微波辐射计观测精度的模拟分析

微波辐射计的观测精度及其对数值模式同化应用的影响评估是微波辐射计观测指标设计的重要参考。基于微波探测仪(ATMS)资料,利用三维变分同化系统模拟分析在轨微波辐射计的观测精度指标。针对ATMS观测误差特征,在其观测基础上增加均值为零、标准偏差分别为0.5,1.0,1.5,2.0K的正态随机扰动,进而获得不同精度的观测模拟值序列,然后利用Harris和Kelley的辐射资料偏差订正经验方法订正不同精度的观测资料。偏差订正后,利用三维变分同化模式(WRFDA)直接同化ATMS资料。通过2016年6月6h预报场的同化试验,评估了不同观测精度的模拟资料对数值模式的同化影响。     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

Investigating the Coronal Mass Ejections associated with DH type-II radio bursts and solar flares during the ascending phase of the solar cycle 24

We studied a set of 74 CMEs, with shedding the light on the halo-CMEs (HCMEs), that are associated with decametric – hectometric (DH) type-II radio bursts (1–16?MHz) and solar flares during the period 2008–2014. The events were classified into 3 groups (disk, intermediate, and limb events) based on their longitudinal distribution.We found that the events are mostly distributed around 15.32° and 15.97° at the northern and southern solar hemispheres, respectively. We found that there is a clear dependence between the longitude and the CME’s width, speed, acceleration, mass, and kinetic energy. For the CMEs’ widths, most of the events were HCMEs (～62%), while the partial HCMEs comprised ～35% and the rest of events were CMEs with widths less than 120°. For the CMEs’ speeds, masses, and kinetic energies, the mean values showed a direct proportionality with the longitude, in which the limb events had the highest speeds, the largest masses, and the highest kinetic energies. The mean peak flux of the solar flares for different longitudes was comparable, but the disk flares were more energetic. The intermediate flares were considered as gradual flares since they tended to last longer, while the limb flares were considered as impulsive flares since they tended to last shorter.A weak correlation (R?=?0.32) between the kinetic energy of the CMEs and the duration of the associated flares has been noticed, while there was a good correlation (R?=?0.76) between the kinetic energy of the CMEs and the peak flux of the associated flares. We found a fair correlation (R?=?0.58) between the kinetic energy of the CMEs and the duration of the associated DH type-II radio bursts.     

基于IMU/FADS/无线电的火星上升器组合导航方案

以火星采样返回任务中火星表面上升为背景，研究了基于惯性测量单元（Inertial Measurement Unit, IMU）、嵌入式大气数据传感系统（Flush Air Data Sensing System, FADS）和无线电信标的组合导航方法。首先，在传统的IMU导航框架中加入由无线电测量获得的相对距离、速度信息，以及由FADS获取的动压、温度数据，建立了基于IMU、无线电和FADS的导航观测模型；然后，基于无迹卡尔曼滤波（Unscented Kalman Filter, UKF）技术对测量信息进行了融合，并压制了过程噪声和测量噪声，从而对上升器的状态进行了联合估计；最后，在数值仿真中，将UKF与自适应无迹卡尔曼滤波（Adaptive Unscented Kalman Filter, AUKF）技术进行了对比，在比较不同滤波器性能的同时，验证了组合导航方法的有效性。     

机载综合无线电平台的中频数据传输总线优选分析

在综合无线电平台中，根据硬件平台通用化要求，需要选择一种总线同时满足CNI 不同波形的中频 数据传输对延时、带宽和误码率的要求。本文针对不加协议的GTX 和加上高速串行通信协议的Aurora、SRIO 进行测试，得到这三种高速串行总线在延时、带宽和误码率的对比分析，从而选择一种总线作为多波形综合的 中频数据传输总线。     

喷雾器喷嘴出口喷流流场特性的实验研究

通过定性定量实验手段研究了以水为单介质流体的某农用喷雾器喷嘴出口流场。首先采用单反相机常规拍摄方法,记录了喷雾压力在50～4 000 Pa范围内的喷嘴出口流场,发现了随着喷雾压力增大,喷嘴出口射流的形状经历了形成液泡到液泡破裂的过程,以及射流发展及最终稳定过程。然后通过PIV测速技术对喷雾压力在1 000～4 000 Pa范围内的喷嘴出口流场进行了定量测量实验研究,获得了在纵向截面上,喷嘴出口速度随喷雾压力增大而增大,且在中心线上的速度随着离喷口距离的增加均呈现振荡衰减的变化规律。在同一位置横向截面上,随着喷雾压力的增加,旋流强度越强,流速越大;而在同一喷雾压力下,离喷嘴出口距离越近的横截面处旋流强度越大,流速也越大。本文实验研究结果验证了PIV测速技术可以用于水雾滴的速度场测量。     

AZ31镁合金早期力学性能退化非线性超声检测

针对镁合金材料早期力学性能退化问题,研究发展了一套可靠的非线性超声系数的测量实验系统,利用该系统测量了AZ31镁合金拉伸和疲劳试件的超声非线性系数.实验结果表明,在拉伸试件进入塑性应变阶段,疲劳试件在疲劳寿命的55%左右之前,超声非线性系数对镁合金材料力学性能退化具有很高的灵敏度.同时利用光学显微镜对拉伸试件的位错滑移...