航天任务飞行控制分析系统的设计和应用

介绍了一个基于windows环境下的多任务航天任务飞行控制分析系统的设计以及实际应用,该系统为任务分析人员、指挥决策人员在任务准备、实施中快速灵活地进行各种复杂条件下的航天任务分析提供了可视化的操作平台以及全面的图表和文字报告。系统采用数据库技术,为用户提供了各种航天器参数和测站参数等信息。文中介绍了该系统的软件结构、数学模型和功能设计,并给出了具体的仿真应用。     

三维图元的设计及其在遥测数据可视化中的应用

设计了接口良好、通用性强、运行速度快、视觉效果良好的三维图形元。以设计某型无人直升机三维图元为例进行了详细测试和实际应用 ,收到了满意效果。     

平板缝隙溅击喷嘴冷流混合特性

作为变推力液体火箭发动机上环形缝隙式喷嘴基本特性研究的一部分,本文研究了溅板的加入,以及溅板几何尺寸的改变对喷雾场冷流混合特性的影响。结果表明,溅板的加入改善了流强与混合比分布。溅击角的增大和合成膜在溅板上撞击线的内移不同程度地提高了E_m值。合理的设计和准确控制喷注参数可以获得满意的流强与混合比分布。     

SPACE LIFE SCIENCE IN 2000-2001

Chinese scientists studied some of the problems in the field of space life science and achieved success in the area during 2000-2001. Space biological experi ments were carried out in the orbit and the results of ground studies on protein crystallization, space radiation, space motion sickness were introduced in this paper. The influences of simulated weightlessness on the brain-function, the car diovascular, endocrine hormones, immunity, skeletal and muscle systems were presented. In addition, gravity medicine and space environment medicine, as well as countermeasures to space deconditioning, such as the traditional Chinese medicine, were also reported.     

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

复合材料三角形层板稳定性分析与实验研究

 给出了正交异性三角形简支板和固支板临界载荷的计算方法。对5种不同铺层的14块碳/环氧层板进行了稳定性实验研究。理论预测与实验结果基本一致。     

基于图形变形法的固体火箭发动机优化设计

基于图形变形法探索固体火箭发动机优化设计空间，通过可视化展示设计空间形态，能够提高固体火箭发动机优化设计效率和质量。采用试验设计方法对设计变量和约束条件重要性进行排序，简化优化模型；采用图形变形法对简化优化模型在不同试验设计点进行可视化分析；可视化选取可行设计空间中目标函数较小的点作为初始点。应用三种常规优化算法对4个不同初始点进行优化计算，计算结果表明，图形变形法优选的初始点使优化效率有不同程度的提高，优化结果具有更好的全局最优解特性；与遗传算法比较，效率提高400倍以上。     

缝合复合材料层板面内力学性能试验与分析

研究多种缝合方向、缝合密度对复合材料层板面内拉、压、剪等基本力学性能和典型失效模式的影响，并结合理论模型分析缝合参数影响层板力学性能的机理。结果表明，缝合对层板面内性能有一定影响，缝合密度的增加导致层板面内性能下降，缝合方向对层板性能影响较大；试件破坏位于缝合针孔处；缝合造成的纤维弯曲和纤维断裂引起了较强的应力集中，是缝合影响层板力学性能的主要因素。     

尖侧缘机身布局的俯仰力矩特性及扰流板控制

针对尖侧缘机身布局在大迎角下存在的正俯仰力矩（抬头力矩）问题，通过风洞试验，首先研究了俯仰力矩的迎角分区特性及流动演化规律：线性增长区（迎角为0°~15°），俯仰力矩线性增加，全机从附着流到形成进气道前缘涡和机翼涡；非线性增长区（迎角为17.5°~32.5°），俯仰力矩非线性增加，机头涡出现，机头涡和进气道前缘涡逐渐增强，机翼涡增强后破裂；衰减区（迎角为35°~65°），俯仰力矩逐渐减小，机头涡增强后破裂，进气道前缘涡破裂发展，机翼涡完全破裂。其次，发现了机身前体是产生正俯仰力矩的主要来源，机头涡是导致大迎角下正俯仰力矩的主控流动。当迎角为40°时，前体各截面正俯仰力矩在进气道前缘处达到最大，主要是由于该处机头涡诱导产生了较强的法向力。最后，提出了大迎角机身扰流板控制技术，产生了较好的控制效果。当迎角为40°时，扰流板可使正俯仰力矩减少62%，其原因是扰流板降低了机头涡涡量及其诱导产生的法向力，减少了机身前体对正俯仰力矩的贡献。该控制技术的缺点是扰流板会带来一些升力损失和附加阻力。基于尖侧缘机身参考宽度的雷诺数为2.59×10⁵。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.