Atmospheric pressure variations at extratropical latitudes associated with Forbush decreases of galactic cosmic rays

Changes of troposphere pressure associated with short-time variations of galactic cosmic rays (GCRs) taking place in the Northern hemisphere’s cold months (October–March) were analyzed for the period 1980–2006, NCEP/NCAR reanalysis data being used. Noticeable pressure variations during Forbush decreases of GCRs were revealed at extratropical latitudes of both hemispheres. The maxima of pressure increase were observed on the 3rd–4th days after the event onsets over Northern Europe and the European part of Russia in the Northern hemisphere, as well as on the 4th–5th days over the eastern part of the South Atlantic opposite Queen Maud Land and over the d’Urville Sea in the Southern Ocean. According to the weather chart analysis, the observed pressure growth, as a rule, results from the weakening of cyclones and intensification of anticyclone development in these areas. The presented results suggest that cosmic ray variations may influence the evolution of extratropical baric systems and play an important role in solar-terrestrial relationships.     

基于CATIA的Formulas功能实现二次曲线的G2连续

首先简要概述了物面压力分布与物面外形之间的关系,进而介绍了飞机外形设计中经常用到的一类曲线-二次曲线,并推导出二次曲线G2连续的条件和公式,最后介绍了在CATIA中运用Formulas功能实现二次曲线G2连续的方法,并以实例将该方法应用到飞机外形设计中。     

Seasonal variation of surface refractivity over Nigeria

The seasonal variation of surface refractivity over Nigeria was studied using two years in-situ meteorological data from eight locations over Nigeria. The result shows that the surface refractivity generally has higher value during rainy season than dry season at all location studied. The results also show that the value of surface refractivity increases from arid region in the north to the coastal area in south. The results also show that local meteorology plays a very important role in refractivity variation.     

载人飞船回收着陆半实物仿真系统关键技术研究

载人飞船回收着陆半实物仿真系统是通过模拟飞船返回压力环境,将回收程控装置硬件实物接入仿真回路的一个半实物仿真试验平台。文章简要介绍了该半实物仿真系统的结构,重点叙述了该半实物仿真系统中特有的负压高精度快速调节压力模拟、多通路指令信号处理、混合式网络、多阶段动力学仿真框架等关键技术。     

盖板式预旋系统的压比和熵增特性

对预旋系统内的压力变化相关研究较少。基于理论分析、实验测量以及数值计算,对某盖板式预旋系统的压比及熵增特性进行研究。通过理论推导,对预旋系统内压比与无量纲温降的关系进行分析。在最高转速可达10000r/min的高转速实验台上,测量了转盘上的气流静压以及相对总温,进而获得压比及熵增特性。进行三维数值计算,将数值计算结果与实验结果进行了对比,并根据数值计算结果对预旋系统内的熵产分布以及各元件的熵增情况进行分析。结果表明:系统温降以及旋转马赫数大小决定了预旋系统的理想最大压比,而实际压比与理想压比的比值取决于系统内的熵增大小。采用数值计算以及实验测量所得结果对理论关系式进行了验证,最大偏差2.7%。旋转马赫数一定的条件下,随系统无量纲温降增大,系统压比逐渐减小。由于熵增影响,实测压比与理想压比最大相差约36%。预旋系统内的熵增主要发生在预旋腔静止壁面、接受孔前后、供给孔进口等气流旋转比发生剧烈变化的区域。预旋系统内主要元件的熵增随流量增大都呈逐渐增大的趋势,但接受孔处熵增最小值出现在喷嘴出口旋转比等于1左右时,流量过小或过大都会导致接受孔处熵增变大。     

空间压力容器可靠性定量设计方法研究

针对空间压力容器常规设计方法难以满足航天技术快速发展对轻质量、低成本、高可靠的需求,基于可靠性理论中应力-强度干涉模型,建立空间压力容器可靠性设计数学模型。结合某型号钛合金球形气瓶随机变量统计数据,开展了气瓶可靠性定量设计。计算结果表明,可靠性定量设计方法能够给出产品可靠度定量指标,并在一定程度上降低空间压力容器结构重量。     

正压漏孔校准装置定容室容积测量方法研究

提出了一种正压漏可孔校准装置的定容室容积测量方法,通过在定容室上外接一个容器,并在其内部放置一个体积可以精确计量的金属棒,利用两次膨胀,计算出定容室的容积。该方法的优点是,不需要测量外接容器的容积,也不需要对压力测量值进行绝对校准,测量不确定度小,尤其适合小容积的精确测量。采用这种方法对一台恒压式正压漏孔校准装置的定容室容积进行了测量,分析了测量不确定度,实验结果表明,定容室的容积为9.85 mL,标准不确定度为0.81%,满足了装置的测量要求。     

缝隙式机载真空压力调节活门的研制与设计

针对Cessna(塞斯纳)172R飞机真空系统故障率高的现象,研究了现有机载真空压力调节活门的结构特点,为该机型的真空系统设计一种缝隙式真空压力调节活门,该活门可视情况及时地清除缝隙部位污物,从而降低真空系统的故障率,提高飞机的安全性。     

Experimental investigations of the spray structure and interactions between sectors of a double-swirl low-emission combustor

In this paper, the spray characteristics of a double-swirl low-emission combustor are analyzed by using Particle Imaging Velocimetry (PIV) and Planar Laser Induced Fluorescence (PLIF) technologies in an optical three-sector combustor test rig. Interactions between sectors and the influence of main stage swirl intensity on spray structure are explained. The results illustrate that the swirl intensity has great effect on the flow field and spray structure. The spray cone angle is bigger when the swirl number is 0.7, 0.9 than that when the swirl number is 0.5. The fuel distribution zone is larger and the distribution is more uniform when the swirl number is 0.5. The fuel concentration in the center area of the center plane of side sector (Plane 5) is larger than that of the center plane of middle sector (Plane 1). The spray cone angle in Plane 5 is larger than that in Plane 1. The width of spray cone becomes larger with the increase of Fuel–Air Ratio (FAR), whereas the spray cone angle under different fuel–air ratios are absolutely the same. The results of the mechanism of spray organization in this study can be used to support the design of new low-emission combustor.     

水下超声速射流对上浮水雷受力特性影响研究

固体火箭发动机具有功率密度大、推力大等优势,常被用于上浮水雷的推进器。然而发动机在水下工作时燃气射流使流场压力发生剧烈脉动,进而影响发动机的推力性能及上浮水雷的受力特性。基于VOF多相流模型和理想气体模型,建立了上浮水雷在不同工作状态(欠膨胀、完全膨胀、过膨胀)下的数值模型,研究了水下燃气喷射流对上浮水雷的受力特性影响。结果显示,欠膨胀工况时,发动机推力平缓,大小为12.2KN,上浮水雷受力未出现负值;完全膨胀时,射流发生颈缩、胀鼓现象位置距离雷体较远,导致发动机推力及水雷壳体受力振荡不剧烈;过膨胀工况时,射流发生颈缩、胀鼓现象距离喷管较近,发动机推力发生剧烈脉动,产生21.37%的振荡幅度,胀鼓现象发生时,流场压力显著降低使得上浮水雷后体受力减小,壳体阻力增大,上浮水雷最大产生27KN的负推力。