高空发动机试车台矢量推力现场动态校准技术

根据发动机试车台矢量推力现场动态校准需求，通过系统化论证，针对试车台的技术要求及校准需求，解决发动机试车台现场实际使用和实验室校准条件不同造成的附加测量误差、试验台推力无法整体校准等问题。文中提出了利用摆锤式动态力加载装置实现标准矢量力加载的方案，为了验证设计方案的可行性，利用现有的设备研究验证校准方案，通过试验和分析给出了校准不确定度。结果表明：该方案动态性能优异，响应迅速，动态校准不确定度为2.2%，能满足高空发动机试车台矢量推力测试的需求，为后续进一步准确测试矢量推力提供了依据。     

高效空间应用燃料电池热能利用技术研究

首先介绍了空间应用燃料电池高效散热及温控技术。高精度控温主要是利用被动散热技术,将产生的热量快速传导至外部冷却介质,从而保证产热面的温度均匀性,实现电池稳定工作。通过嵌入式被动散热和双端散热的冷却方式,实现电堆内部最大温差小于5℃,换热系数达1000W/(m·K)。     

A boundary vector cell model of place field repetition

Hippocampal place cells are thought to form the neural substrate of a global cognitive map. However, in multicompartment mazes, these cells exhibit locally repeating representations, undermining the global cognitive map view of place cells. This phenomenon appears to be related to the repetitive layout of these mazes, but still no hypothesis adequately explains it. Here, we use a boundary vector cell (BVC) model of place cell firing to model the activity of place cells in numerous multicompartment environments. The activity of modeled place cells bears a striking resemblance to experimental data, replicating virtually every major experimental result. Our results support the BVC model and indicate that locally repeating place cell firing could result purely from local geometry.     

三维全五向编织复合材料的细观结构分析

基于三维全五向矩形编织工艺的携纱器运动规律,系统研究了三维全五向编织复合材料的纱线空间运动方式、纱线间交织结构形态,建立了三维全五向编织结构各区域的单胞几何模型,推导了编织角等工艺参数与各单胞结构参数间的数学关系,计算了纤维体积分数的预测值,并与实测值相比误差较小,表明所建模型较为合理、准确.     

燃料电池轻型飞机起飞质量估算方法

为应对全球能源危机和环境污染问题,航空界将电动飞机作为研究的热点之一。燃料电池飞机在飞行过程中飞机质量基本保持不变,使得燃料电池飞机在起飞质量估算方法上和传统动力飞机相比,具有不同特点。本文通过引入推进系统系数等参数,建立了燃料电池飞机各部分质量系数的确定及飞机起飞质量的估算过程,并为后续机型的研制提供参考。     

天宫一号目标飞行器电源分系统设计

介绍了天宫一号（TG1）目标飞行器电源分系统的组成和主要技术指标。分析了国内在低轨飞行器上采用100V高压母线、大批量使用国产氢镍电池、三结砷化镓太阳电池片和半刚性基板等关键技术。回顾了电源分系统研制过程中高电压元器件体系建立、半刚性帆板力学及空间环境设计与验证、氢镍电池在轨寿命和可靠性研究,以及高压电源系统可靠性及安...     

地球静止轨道卫星硅太阳电池在轨特性分析

空间辐照效应的影响,使太阳电池输出功率随其在轨时间的推移而逐渐衰减。文章以2颗在轨的地球静止轨道卫星为研究对象,对某类我国自主研发的硅太阳电池的在轨输出功率衰减率进行了分析。并针对所获得的相关遥测参数,通过数值统计与数学分析的方法,采用确定的计算公式得出太阳电池阵的总输出电流,用以表征其输出功率。文章提出了一种曲线平移...     

三维编织复合材料热物理性能的有限元分析

根据三维编织复合材料的细观结构,分别建立了三维四向和五向编织复合材料热物理性能的有限元模型.采用周期性的非绝热温度边界条件和位移边界条件,计算了三维四向和五向编织复合材料的整体等效热传导系数和热膨胀系数,计算结果同已有文献相比与实验值符合得更好.在此基础上,迸一步研究了编织角、纤维体积分数、编织结构等参数对材料热物理性...     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

Particle simulation of grid system for krypton ion thrusters

The transport processes of plasmas in grid systems of krypton (Kr) ion thrusters at different acceleration voltages were simulated with a 3D-PIC model, and the result was compared with xenon (Xe) ion thrusters. The variation of the screen grid transparency, the accelerator grid current ratio and the divergence loss were explored. It is found that the screen grid transparency increases with the acceleration voltage and decreases with the beam current, while the accelerator grid current ratio and divergence loss decrease first and then increase with the beam current. This result is the same with Xe ion thrusters. Simulation results also show that Kr ion thrusters have more advantages than Xe ion thrusters, such as higher screen grid transparency, smaller accelerator grid current ratio, larger cut-off current threshold, and better divergence loss characteristic. These advantages mean that Kr ion thrusters have the ability of operating in a wide range of current. Through comprehensive analyses, it can be concluded that using Kr as propellant is very suitable for a multi-mode ion thruster design.