一种基于OPTICS聚类的仅测角导航目标检测算法

仅测角自主导航方法具有设备简单、复杂度低，功耗低的优点，在空间任务中具有广泛的应用前景.针对中远距离下空间目标特征少的特点，提出了一种利用基于OPTICS聚类算法的空间目标检测方法，可用于仅测角导航过程中的目标检测.对原始星图进行预处理提取星点及目标点，并结合星图识别的结果选择部分帧，使用经过改进的OPTICS聚类方法获得目标运动轨迹.最后，使用本文中的算法对软件仿真出的含有目标的高精度星图进行处理验证了算法的可行性.在卫星相对于空间目标抵近过程中，目标检测的水平误差及垂直误差小于0.15°的帧数分别占到了85.4%以及99.6%.相比AVANTI实验中的目标检测方法，减少了在轨任务中相关参数的调节，进一步提升了算法的自主性.     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

Manifold structure preservative for hyperspectral target detection

A nonparametric method termed as manifold structure preservative (MSP) is proposed in this paper for hyperspectral target detection. MSP transforms the feature space of data to maximize the separation between target and background signals. Moreover, it minimizes the reconstruction error of targets and preserves the topological structure of data in the projected feature space. MSP does not need to consider any distribution for target and background data. So, it can achieve accurate results in real scenarios due to avoiding unreliable assumptions. The proposed MSP detector is compared to several popular detectors and the experiments on a synthetic data and two real hyperspectral images indicate the superior ability of it in target detection.     

基于磁场映像的印制电路板故障诊断方法研究

简要分析了印制电路板的电磁场，提出了用电磁感应法测量磁场的电咱故障诊断新方法，并给出了测试系统组成方案。最后通过验证实验证明了该方法是确实可行的。     

逆向工程的关键技术及其研究

综述了逆向工程中实物数字化技术、测量数据的预处理、曲面重建技术、重构曲面的评价和检验等关键技术的发展现状和存在的问题,并对今后的发展方向进行了讨论。     

显微PIV系统与实现

显微PIV系统可用于流体微观层次以及微流体流动的测量,可获得流体速度的场信息以及其中颗粒的场信息。本文主要介绍显微PIV系统所涉及的显微图像获取技术以及图像处理算法。该系统由硬件与相应软件系统组成。其中,硬件主要包括放大倍数为1000倍的光学显微镜以及最大拍摄速度为10000帧/秒的高速摄像系统;IMPACT软件为自行开发的基于C++系统的面向对象程序,其中内嵌多种数据处理与分析算法。通过对尺寸为1μm颗粒运动的测量,对不同数据处理算法进行了检验,结果表明:建立的显微PIV系统可有效获得微观流体流动的图像并可准确进行数据的处理,该系统完全可用于微观流体流动的测量。     

压电驱动自耦合射流流动特性实验

为了研究压电驱动狭缝喷口自耦合射流的流动特性,采用PIV、热线风速仪测试手段,对自耦合射流激发器在不同激励因素下的流场和速度场分布进行了实验和分析.结果显示,自耦合射流在狭缝出口处产生了反向涡对,随着自耦合射流的发展,射流呈现出在喷口短轴方向急剧向两侧扩展、而在喷口长轴方向先收缩后缓慢扩展的流动特征;自耦合射流的速度分布在法线方向呈现先上升后下降的趋势,在z/b=10左右速度达到最大值;在射流展向上,短轴方向速度呈规律的对称分布和速度自模的特征,而长轴方向速度近喷口区域呈现马鞍状分布,随着法向距离增加这种趋势消失.研究中发现,激发器存在两个谐振频率,在谐振频率激发下自耦合射流的速度和涡量比较大.与常规射流相比,自耦合射流显示出了独特的流动特性.     

纹影干涉图的图像处理方法研究

本文利用计算机存贮量大、运算能力强的特点研究了一种分析纹影干涉图,计算密度场的图像算法。这套算法包括使用低通滤波技术消除干涉图背景中的高频噪声,使用 Hilditch 算法细化宽度多于一个像素的干涉条纹,使用模式识别方法提取干涉条纹的位移量,最后应用数值积分技术求解密度场的空间分布。这里研究的图像处理方法提高了纹影干涉图定量分析的精度、加快了实验结果的处理速度,给出了直观可靠的数值结果,是一种实用有效的图像算法。     

提高图像轮廓清晰度的快速插值放大方法

分析了当前主要的高清晰度图像插值放大方法,为实现快速放大而选择了基于图像轮廓插值改善清晰度的技术路线,并在已有算法的基础上开展了进一步的研究.提出了新的图像轮廓线光顺数值算法,对轮廓线划分的两类子区域提出了精度更高的插值算法.最后,以典型平面图形的图像和由3DMax生成的三维渲染图像为例对本文方法进行检验,与双线性插值结果的对比说明,该方法可以明显改善插值放大效果.     

飞机外形件三角网格模型光滑B样条曲面重建

综合考虑曲面重建时的拟合精度、曲面片拼接处的连续性和曲面的光顺性等因素,以三角网格模型的双三次B样条曲面重建为例,研究了飞机外形件三角网格模型的分片光滑B样条曲面重建方法。该方法首先采用最小二乘法逼近散乱数据,初步获得分片B样条曲面;然后将光顺准则加权到最小二乘函数中调节曲面光顺程度;最后运用罚函数法保证曲面片边界近似G1连续。将该方法应用于飞机外形件实测数据的曲面重建,误差分析结果验证了方法的有效性。