Analysis of reaction torque-based control of a redundant free-floating space robot

Owing to the dynamics coupling between a free-floating base and a manipulator,the non-stationary base of a space robot will face the issue of base disturbance due to a manipulator's motion.The reaction torque acted on the satellite base's centroid is an important index to measure the satellite base's disturbance.In this paper,a comprehensive analysis of the reaction torque is made,and a novel way to derive the analytical form of the reaction torque is proposed.In addition,the reaction torque null-space is derived,in which the manipulator's joint motion is dynamically decoupled from the motion of the satellite base,and its novel expression demonstrates the equivalence between the reaction torque null-space and the reaction null-space.Furthermore,the reaction torque acted as an optimization index can be utilized to achieve satellite base disturbance minimization in the generalized Jacobian-based end-effector Cartesian path tracking task.Besides,supposing that the redundant degrees of freedom are abundant to achieve reaction torque-based active control,the reaction torque can be used to realize satellite base attitude control,that is,base attitude adjustment or maintenance.Moreover,because reaction torque-based control is a second-order control scheme,joint torque minimization can be regarded as the optimization task in reaction torque-based active or in-active control.A real-time simulation system of a 7-DOF space robot under Linux/RTAI is developed to verify and test the feasibility and reliability of the proposed ideas.Our extensive empirical results demonstrate that the corresponding analysis about the reaction torque is correct and the proposed methods are feasible.     

基于排队论的航班滑出时间预测

根据航班离港流程及滑出时间预测的问题属性，将滑出过程分解为无障碍滑 行至跑道端及在跑道端排队等待起飞两个阶段。分析了进离港航班对滑出时间的影响，提出 了一种场面交通状况衡量指标及基于该指标的无障碍滑出时间计算模型。并将跑道提供服务 的过程建模为M/G/1/∞随机服务系统，建立了基于排队论的等待起飞时间预测模型。以北京 首都国际机场航班运行数据为例，使用单个航班及以15 min为间隔的平均滑出时间的预测准 确率验证了模型的有效性，与首都机场当前的滑出时间计算模型进行对比，预测准确率显著 提高。     

欠驱动系统控制方法实现导弹时间与角度协同

首先,给出弹目距离与视线角控制的二阶欠驱动系统的标准形式,选取这两个相关的系统状态分别构造滑模平面,滑模面能够保证系统状态的跟踪;然后,选取李雅普诺夫函数,采用李雅普诺夫稳定定理求取最终的控制量,保证两个滑模面渐近稳定,实现对撞击时间与撞击角度的同时控制;最后,在时间控制基本完成后,切换为角度精确控制。     

Towards PPP-RTK: Ambiguity resolution in real-time precise point positioning

Integer ambiguity resolution at a single station can be achieved by introducing predetermined uncalibrated phase delays (UPDs) into the float ambiguity estimates of precise point positioning (PPP). This integer resolution technique has the potential of leading to a PPP-RTK (real-time kinematic) model where PPP provides rapid convergence to a reliable centimeter-level positioning accuracy based on an RTK reference network. Nonetheless, implementing this model is technically subject to how rapidly we can fix wide-lane ambiguities, stabilize narrow-lane UPD estimates, and achieve the first ambiguity-fixed solution. To investigate these issues, we used 7 days of 1-Hz sampling GPS data at 91 stations across Europe. We find that at least 10 min of observations are required for most receiver types to reliably fix about 90% of wide-lane ambiguities corresponding to high elevations, and over 20 min to fix about 90% of those corresponding to low elevations. Moreover, several tens of minutes are usually required for a regional network before a narrow-lane UPD estimate stabilizes to an accuracy of far better than 0.1 cycles. Finally, for hourly data, ambiguity resolution can significantly improve the accuracy of epoch-wise position estimates from 13.7, 7.1 and 11.4 cm to 0.8, 0.9 and 2.5 cm for the East, North and Up components, respectively, but a few tens of minutes is required to achieve the first ambiguity-fixed solution. Therefore, from the timeliness aspect, our PPP-RTK model currently cannot satisfy the critical requirement of instantaneous precise positioning where ambiguity-fixed solutions have to be achieved within at most a few seconds. However, this model can still be potentially applied to some near-real-time remote sensing applications, such as the GPS meteorology.     

卫星激光通信终端控制系统稳定性设计

卫星激光通信终端控制系统的稳定性是激光通信链路建立与保持过程中的重要性能指标.以终端天线与快速倾斜镜(FSM)个内回路控制器设计为基础,建立了当电荷耦合(CCD)探测器获得对方终端位置信息构成激光闭合回路时整个激光通信控制系统模型,并根据时滞依赖稳定性定理推导了系统渐近稳定的充分条件,在此基础上对不稳定情况,结合锥补法...     

带时变通信时间延迟的卫星编队姿态协同自适应L2增益控制

针对卫星编队姿态协同分布式控制问题,提出一种基于Lyapunov方法的编队飞行协同控制策略.首先,考虑到实际编队飞行中星问通信存在时变时间延迟及模型不确定问题,结合变结构控制的思想设计一种针对时滞系统稳定性分析的Lyapunov函数,从而由直接Lyapunov方法得到可对模型参数进行估计的自适应分布式姿态协同控制器,并...     

基于贯序正则极端学习机的时间序列预测及其应用

为实现对液压泵特征参数的在线预测,提出一种贯序正则极端学习机(SRELM),并研究了基于SRELM的预测方法.SRELM根据结构风险最小化原理实现网络训练,其网络权值可随新样本的逐次加入而递推求解,具有泛化能力强与训练速度快的优点,因此适于特征参数的在线预测.基于SRELM的预测方法利用特征参数训练SRELM模型,以逐...     

数字存储示波器Δt时间测量和ΔV幅度测量的不确定度评定

评定了数字存储示波器Δt时间差测量功能的测量不确定度和ΔV幅度差测量功能的测量不确定度,讨论了影响评价结果不确定度的几个主要误差来源,包括时基误差、抽样量化误差、测量重复性、幅度测量误差等。同时,以一组实验结果为例,给出了各自的不确定度评定结果。     

不确定多变量线性系统的快速收敛Terminal滑模控制

针对一类不确定多变量线性系统,提出一种对数型快速Terminal滑模变结构控制方案,设计了对数型非线性Terminal滑模超曲面及其相应的变结构控制律.研究结果表明:系统状态在有限时间内收敛至Teminal 滑模面上,随后系统保持在滑模面上并在有限时间内收敛到平衡点.与普通快速Terminal滑模相比,在滑模面上能以更...     

基于二阶滑模的再入飞行器末制导律研究

针对再入飞行过程中飞行器末制导启动后制导系统存在的模型不确定性因素以及气动环境复杂等鲁棒制导问题,结合落点角约束条件,提出一种基于二阶滑模的鲁棒末制导律设计方法。基于二阶滑模控制的思想,设计有限时间收敛的二阶滑模末制导律;为了消除有界的内外扰影响同时削弱抖振效果,引入超螺旋算法设计有限时间收敛的连续二阶滑模末制导律。飞行器在该末制导律导引下,弹目视线角速率及落角约束快速收敛,从而保证飞行器有很高的命中精度。基于Lyapunov定理的稳定性理论证明及仿真结果均表明了该末制导方案的有效性。