微小型航空燃气轮机离心叶轮拓扑优化设计

离心叶轮是微小型航空燃气轮机中的关键部件,要求其在满足气动性能的前提下,尽量减轻结构重量,传统设计制造技术已基本发挥到极致,但增材制造技术及拓扑优化设计方法的发展为其进一步优化设计拓展了新的空间。针对某型航空微型燃气轮机离心叶轮减重设计问题,依托增材制造和拓扑优化设计技术,在现有设计的基础上,首先对离心叶轮进行静强度分...     

A parameterized geometry design method for inward turning inlet compatible waverider

Intensive studies have been carried out on generations of waverider geometry and hypersonic inlet geometry. However, integration efforts of waverider and related air-intake system are restricted majorly around the X43A-like or conical flow field induced configuration, which adopts mainly the two-dimensional air-breathing technology and limits the judicious visions of developing new aerodynamic profiles for hypersonic designers. A novel design approach for integrating the inward turning inlet with the traditional parameterized waverider is proposed. The proposed method is an alternative means to produce a compatible configuration by linking the off-the-shelf results on both traditional waverider techniques and inward turning inlet techniques. A series of geometry generations and optimization solutions is proposed to enhance the lift-to-drag ratio. A quantitative but efficient aerodynamic performance evaluation approach （the hypersonic flow panel method） with lower computational cost is employed to play the role of objective function for opti- mization purpose. The produced geometry compatibility with a computational fluid dynamics （CFD） solver is also verified for detailed flow field investigation. Optimization results and other numerical validations are obtained for the feasibility demonstration of the proposed method.     

多值逻辑函数最小化的McCluskey—Quine方法改进及程序实现

多值逻辑电路的发展，使得以往的化简方式已不能适应电路取值的增高和函数项的增加。本文以三变量三值函数为例，讨论了多值逻辑电路化简的物理背景，采用改进的McCluskey-Quine方法进行最小化的算法，以及质蕴含项覆盖问题的求解，并给出了程序流程。由于该程序采用的面向对象技术，经过适当扩展可以应用于多变量多值函数。     

Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds,Part Ⅱ-Experimental validation using Infra-Red transition measurement from Wind Tunnel tests

In the present paper, an ‘in-house' genetic algorithm was numerically and experimentally validated. The genetic algorithm was applied to an optimization problem for improving the aerodynamic performances of an aircraft wing tip through upper surface morphing. The optimization was performed for 16 flight cases expressed in terms of various combinations of speeds, angles of attack and aileron deflections. The displacements resulted from the optimization were used during the wind tunnel tests of the wing tip demonstrator for the actuators control to change the upper surface shape of the wing. The results of the optimization of the flow behavior for the airfoil morphing upper-surface problem were validated with wind tunnel experimental transition results obtained with infra-red Thermography on the wing-tip demonstrator. The validation proved that the 2D numerical optimization using the ‘in-house' genetic algorithm was an appropriate tool in improving various aspects of a wing's aerodynamic performances.     

机翼盒段结构优化分析

机翼在飞机飞行过程中产生升力,是飞机能够飞行的根本保障。翼盒是机翼的主要承力部件,承受机翼上产生的所有载荷。所以翼盒的结构设计,对机翼甚至整个飞机的影响有着至关重要的作用。好的结构设计不仅能够保证机翼产生正常的气动升力,以及机翼内系统的正常运作,而且能够充分发挥材料的性能优势,减轻结构重量。因此,结构优化设计技术开始广泛被使用。总结翼盒优化的工作,包括不同的结构布局形式,不同的气动压心位置,不同的发动机吊挂位置以及翼盒不同位置的结构尺寸优化,分析影响翼盒结构设计的因素,为机翼结构的初步设计打好基础。     

Research on multi-fidelity aerodynamic optimization methods

 Constructing high approximation accuracy surrogate model with lower computational cost has great engineering significance. In this paper, using co-Kriging method, an efficient multifidelity surrogate model is constructed based on two independent high and low fidelity samples. Co-Kriging method can use a greater quantity of low-fidelity information to enhance the accuracy of a surrogate of the high-fidelity model by modeling the correlation between high and low fidelity model, thus computational cost of building surrogate model can be greatly reduced. A wing-body problem is taken as an example to compare characteristics of co-Kriging multi-fidelity (CKMF) model with traditional Kriging based multi-fidelity (KMF) model. A sampling convergence of the CKMF model and the KMF model is conducted, and an appropriate sampling design is selected through the sampling convergence analysis. The results indicate that CKMF model has higher approximation accuracy with the same high-fidelity samples, and converges at less high-fidelity samples. A wing-body drag reduction optimization design using genetic algorithm is implemented. Satisfying design results are obtained, which validate the feasibility of CKMF model in engineering design.     

引入平均最好位置的量子粒子群算法及在航空发动机非线性模型求解中的应用

为改善粒子群算法的全局搜索能力和计算精度,在标准粒子群算法和量子理论的基础上,将平均最好位置引入粒子的状态更新过程,提出了1种基于量子行为改进的粒子群算法及不同的收缩-扩张因子取值策略.采用该量子粒子群算法对建立的典型双轴涡扇发动机部件级非线性模型进行了求解,结果表明:分段线性递减收缩-扩张因子适用于复杂的航空发动机隐式模型,其收敛效率和精度都较高,具有一定的工程应用价值.     

基于面元法的分布式涵道推进系统进气道优化设计

分布式涵道推进系统被认为是一种高效率的动力布局形式,其中进气道如何使气流低损失地快速过渡到数个圆形截面的涵道风扇进口是一个亟需探索的设计问题。以分布式涵道推进系统进气道过渡段为研究对象,基于面元计算方法,发展了一种进气道内流动的快速数值预测手段。应用所发展面元法数值方法结合进气道的超椭圆参数化方法、自适应优化算法建立了分布式涵道推进系统进气道的无经验优化设计方法。以某型悬停状态的分布式涵道推进垂直起降飞行器为例,使用该设计方法实现了从无圆滑过渡的简单初始几何到气动指标符合优化预期的光顺几何的优化设计。基于RANS的三维数值分析表明：所优化设计的进气道相比于初始几何总压畸变系数(DC)从0.0086降低到0.0067,低于基于经验设计的参考几何（DC=0.0073）,且流场无明显分离及旋涡,确认了这种具有高时间效率的无经验设计方法的有效性。     

可变弯度导叶缝道优化设计及分析

为满足先进航空发动机对进口导叶的需求,对可变弯度导叶缝道形式进行优化设计,利用数值模拟方法对不同工况条件下不同缝道形式可变弯度导叶的性能进行了详细的考察。计算结果表明新型可变弯度导叶总压损失更小,可承受更大的来流马赫数和后叶转角,同时攻角特性也不同。良好的缝道形式使得出口射流的大小和方向更加合理,进而抑制后叶吸力面附面层的发展,较小的前缘曲率则可以有效降低后叶前缘的压力系数。新型可变弯度导叶的性能更优,可用工作范围更大。     

基于经济性的公务机升阻特性优化展望

在可预见的未来,高性能、高效能的公务机将在世界公务机市场中日益重要。基于提高公务机空气动力效率的目的,讨论了未来可能应用于工程实际的升阻优化技术的优缺点,并展望了其应用前景。