MAP-CA在视频压缩中的应用

信息时代的重要特征是信息的数字化,但数字化的视频数据量是非常巨大的。为了使数字化的视频信号更有效地传输,对其进行压缩势在必行。应用MAP-CA这个DSP芯片可以对视频图像进行MPEG-4标准的压缩,压缩比可以达到1000:1。在公用电话线上就可以连续传输视频,并能保持图像的质量,最高图像清晰度为768×576,可以达到接近DVD的画面效果。     

Tunnel/predictor display with two-axis control coordination and simplification

A longitudinal-lateral control coordination and simplification concept is considered for a tunnel/predictor display, which presents the command flight path and a specified future aircraft position in a 3-dimensional format to the pilot, for improving flight path control. A basic element of the proposed concept is the generation of common longitudinal-lateral transfer characteristics of the predictor-aircraft system for the crossover frequency region. Control coordination is supported by a dynamics similarity between the longitudinal and the lateral response characteristics of the predictor position in closed-loop pilot control actions. The control coordination and simplification concept is considered to support the pilot in manual flight path control, directed at an enhancement of his control performance and at a reduction of his workload. Results from pilot-in-the-loop simulation experiments support the theoretical findings and show the effectiveness of the proposed predictor concept with control coordination.     

Broad-band spectral properties of accreting X-ray binary pulsars

Broad-band spectra of accreting X-ray binary pulsars can be fitted by a phenomenological model composed of a power law with a high energy rollover above 10 keV, plus a blackbody component with a temperature of few hundred eV. While, at least qualitatively, the hard tail can be explained in terms of (inverse) Compton scattering, the origin of the soft component cannot find a unique explanation. Recently, a qualitative picture able to explain the overall broad-band spectrum of luminous X-ray pulsars was carried out by taking into account the effect of bulk Comptonization in the accretion column. After a review of these recent theoretical developments, I will present a case study of how different modeling of the continuum affect broad features, in particular the cyclotron resonance features in Vela X-1.     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.     

应变速率和温度对NiAl-30Cr-4Mo 共晶合金拉伸性能的影响

研究了温度和应变速率对NiAl-30Cr-4Mo共晶合金的拉伸性能的影响.研究结果表明在同一应变速率(1.67×10-4/s)下,随着温度的升高,材料的塑性增加;在韧脆转变温度(BDTT)923 K以上,随着应变速率的降低,合金的拉伸断口韧窝密集程度增大,合金塑性断裂的趋势越明显,且屈服强度随应变速率的降低而下降.     

DLR-F4翼身组合体的阻力计算

为了考察自行研发的CFD软件的计算能力和阻力计算精度，本文采用LU—SGS方法、MUSCL差分格式和Baldwin—Lomax代数湍流模型，数值模拟了AIAA阻力计算工作室提供的DLR—F4翼身组合体的绕流流场，综合分析了easel和case2的气动力的计算结果，并与NASA Christopher L．Rumsey采用CFL3D6．0和AFRL/VAAC Don W．Kinsey采用Cobalt60提供的两组计算结果以及AGARD提供的两种不同风洞的测力试验结果作了比较。计算结果表明，本文计算精度与国外CFD软件相当。为了提高激波，边界层干扰的模拟精度，今后要重点加强湍流模型的应用研究。     

TC4钛合金的微动磨损及防护

对Ｔｉ－６Ａｌ－４Ｖ合金在１８℃，１００℃２５０℃下的微动磨损特性及防护工艺进行了研究。表明：该合金微动磨损的主要磨损形式是疲劳脱层，其磨损量随温度升高而下降，高渐微动磨损量与磨损区表面所形成的氧化层的性质及厚度有关。     

一种测量航空发动机T*4温度的新方法

采用热电偶信号放大集成电路AD595结合镍铬-镍铝热电偶温度传感器,设计了航空发动机T*4温度热电偶测温电路,实现了冷端自动补偿、热电偶断线报警信号输出功能.实测数据分析表明输出幅值大,误差小,重复性好.测量电路简单,具有较强的实用性.     

信息系统群演化的综合环境SEE的研究

旨在通过对系统构架各视角的研究，开发一个信息系统综合演化环境，从而提供针对各类系统演化特征的通用的解决方案，并利用方法论的手段规范、指导和维护系统(群)的演化活动。本文首先论述了大型系统中各个系统和组件变化及改进活动中存在的问题，分析相关的研究及面临的挑战，从而提出系统群演化的概念。然后文章概括了系统群演化的特征，提出解决以上问题的思想方法，即开发“信息系统群演化的综合环境(Synthetic environment of evolution，SEE)”，将各种演化活动纳入规范，指导系统群的演化活动；在此基础上，进一步就实现SEE的关键技术给出了描述及运用的范例。     

CVD-Si3N4陶瓷及其复合材料氧化行为研究进展

概述了CVD—Si3N4陶瓷及其复合材料在干燥氧气下的氧化行为。Si3N4陶瓷在高温下氧化时，除生成SiO2保护膜外，还生成一薄层比SiO2膜更优异的氧气扩散阻挡层(Si—O—N化合物层)，该层具有优异的抗氧化性能。介绍了两种氧化机制模型，同时分析了温度、杂质等对CVD—Si3N4陶瓷氧化行为的影响。