Evaluation of COMPASS ionospheric model in GNSS positioning

As important products of GNSS navigation message, ionospheric delay model parameters are broadcasted for single-frequency users to improve their positioning accuracy. GPS provides daily Klobuchar ionospheric model parameters based on geomagnetic reference frame, while the regional satellite navigation system of China’s COMPASS broadcasts an eight-parameter ionospheric model, COMPASS Ionospheric Model(CIM), which was generated by processing data from continuous monitoring stations, with updating the parameters every 2 h. To evaluate its performance, CIM predictions are compared to ionospheric delay measurements, along with GPS positioning accuracy comparisons. Real observed data analysis indicates that CIM provides higher correction precision in middle-latitude regions, but relatively lower correction precision for low-latitude regions where the ionosphere has much higher variability. CIM errors for some users show a common bias for in-coming COMPASS signals from different satellites, and hence ionospheric model errors are somehow translated into the receivers’ clock error estimation. In addition, the CIM from the China regional monitoring network are further evaluated for global ionospheric corrections. Results show that in the Northern Hemisphere areas including Asia, Europe and North America, the three-dimensional positioning accuracy using the CIM for ionospheric delay corrections is improved by 7.8%–35.3% when compared to GPS single-frequency positioning ionospheric delay corrections using the Klobuchar model. However, the positioning accuracy in the Southern Hemisphere is degraded due apparently to the lack of monitoring stations there.     

基于WiFi指纹库的室内定位研究进展和展望

首先简要说明了室内定位技术中WiFi定位的优势;然后通过梳理WiFi指纹库的室内定位相关技术研究,简要阐述了WiFi信号的相关特性,并以实验作为佐证,重点介绍了信号传播模型、指纹库构建方法、指纹信号匹配准则和不同手机对WiFi信号敏感差异的标校等相关技术进展;最后,简要介绍了WiFi室内定位技术的未来发展趋势。     

全球精密单点定位性能评估

随着中国北斗三号卫星导航系统（BDS-3）全面建成与开通，北斗卫星导航系统已步入了新发展阶段，基于BDS-3实现全方位、多层次、高精度应用已成为地学研究中一项基本任务。利用全球最新均匀分布的10个MGEX跟踪站，分别从24 h内接收到的卫星数、卫星位置精度因子（PDOP）、卫星数据解算完整率和双频非组合精密单点定位（PPP）静态/动态定位精度等方面系统深入地评估了BDS-3在全球范围内的可用性。结果表明，测站对卫星跟踪能力与配备的接收机类型和区域位置有强相关性，单BDS-3卫星在全球范围内具有较强的连续定位能力，当使用SEPT POLARX5和JAVAD TRE_3接收机的情况下，数据解算完整率可达100%。此外，水平方向和高程方向定位精度分别优于2 cm和3 cm，并且在联合使用BDS-2和BDS-3定位的条件下，可使得静态定位精度在东、北和高程方向进一步提升37.6%,25.3%和38.9%。     

THE APPLICATION OF SATELLITE POSITIONING TECHNOLOGY AND ITS INDUSTRIALIZATION IN CHINA

Satellite positioning technology has been widely used in all kinds of military and civil land, marine, space and aeronautical target positioning tasks, naviga tion activities and accurate surveying measurements since 90 s in the last cen tury due to its advantage in providing all-weather, real-time, three dimensional and high precision positioning information, as well as speed and accurate timing information. By now, it has already formed a new hi-tech industry basically.This paper briefly reviews the development of the global satellite positioning and navigation technologies including the basic information of China's "Plough navigation system", introduces the history of satellite positioning technology and its major application fields as well as the status quo of this being industri alized trade in China, gives an account of the writers' vision for the application and prospect of the satellite positioning technologies in China, and approaches the tactics and stresses of the satellite positioning technology's application and its industrialization future in China.     

双星定位系统及其备份星在近地卫星联合定轨建模中的应用

建立了基于双星定位系统距离和观测数据的近地卫星联合定轨模型,设计了相应的数值融合联合定轨算法;为进一步提高近地卫星定轨精度,考虑融合双星及备份星距离和观测数据,建立了基于双星和备份星的近地卫星联合定轨模型及实现算法,并针对不同仿真条件进行了联合定轨仿真实验。仿真计算结果表明,联合定轨方式较传统近地卫星精密定轨方式可以更好地抑制双星星历误差对近地卫星定轨精度的影响,近地卫星和双星的定轨精度均得到了一定程度的提高;同时,融合备份星观测数据的近地卫星联合定轨精度得到进一步改善,达到5.17m。     

弹道导弹GPS/SINS组合制导品质控制研究

给出了可提高战术弹道导弹射击精度的ＧＰＳ／ＳＩＮＳ组合制导模型。在给出多模Ｋａｌｍａｎ滤波（ＭＫＦ）数学模型的基础上和建立了可对ＧＰＳ／ＳＩＮＳ组合制导进行在线故障检测，故障了和系统重构的品质控制方案对于系统的重构，提出了鲁棒性处理方法。仿真结果表明：基于ＭＫＦ的ＧＰＳ／ＳＩＮＳ组合制地与单独捷联惯导相比，可使导弹射击精度和到明显提高，组合地的品质也得到了有效控制。     

全球导航卫星系统的测高研究

以美国全球定位系统为代表的全球导航卫星系统具有广泛的应用领域，特点是能够在全球范围和近地空间，全天候地提供飞行器的位置、速度和时间信息。     

短基线动态相对定位中GPS单历元解算整周模糊度方法

针对短基线动态相对定位中快速解算整周模糊度的难题，提出了一种新的方法——GPS单历元解算整周模糊度。文中对相关的观测方程、载波相位的观测精度、真假解的识别等问题进行了详细讨论。试验证明，该方法正确、可靠，解决了快速解算整周模糊度这个难题，克服了传统方法需要进行静态初始化等问题。将该方法应用在车辆、舰船等移动载体上，可以实现真正意义上的实时动态相对定位，具有重要的应用价值。     

GPS接收机中码相位测量精化方法的研究

精确的码相位测量是保证GPS接收机得到精确伪距值进而进行精确定位的一个重要前提。在已有码相位测量精化方法的基础之上提出了两种新的码相位测量精化的方法,讲述了两种方法的原理与具体实现方法,并利用蒙特卡洛方法进行了仿真实验,得到了码相位结果均值、码相位结果均值方差等一系列实验结果,对几种方法的精化效果从精确性、稳定性和跟踪性能等几个方面进行了比较分析,得出了相应的结论。与三角匹配法和二次曲线插值精化法相比,二阶最小二乘拟合精化法和广义延拓逼近精化法有明显优势;广义延拓逼近精化法的精化精度最高、跟踪精度最高,而二阶最小二乘拟合精化法的稳定性最好。     

一种用星敏感器自主定位方法的精度分析

利用星敏感器和地平仪测量星光与地平之间的“星光仰角”作为观测量 ,提出用推广卡尔曼滤波方法来实时估计航天器的最佳位置的自主定位方法 ,通过仿真实验 ,分析比较了“星敏感器精度”、“采样周期”、“恒星导航星的个数”以及“星敏感器安装方位角”等诸因素对航天器定位精度的影响 ,同时总结其变化规律 ,可用于提高航天器自主定位精度