基于Pro/E软件的卫星三维建模方法的探讨

主要对基于Pro/E软件的卫星三维建模和高效率、高可靠性、低成本的总装设计方法等进行了初步的研究和探讨。     

逆向工程的关键技术及其研究

综述了逆向工程中实物数字化技术、测量数据的预处理、曲面重建技术、重构曲面的评价和检验等关键技术的发展现状和存在的问题,并对今后的发展方向进行了讨论。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

弹性机器人的LQG／LTR控制

ＬＱＧ／ＬＴＲ设计方法仅适合于最小相位系统，本文对单臂弹性机器人系统，进行适当的处理和对方法进行改进后，仍采用ＬＱＧ／ＬＴＲ方法设计控制器，得到的闭环系统有较强的鲁棒性。     

四维下降飞行技术的研究与仿真：定常航迹角法下降剖面解算

本文研究的是四维飞行性能管理系统的核心环节－飞机在终端区域内的四维下降技术，首先探讨了基于常值航迹角的定常Ｍ数／指示空速下降飞行技术，论述了其高度剖面的构成与特点，通过尤拉积分方法求解飞机运动方程，实现了高度冲面的解算。其次开发了对速度剖面的迭代过程，选取原则及方法。本文在进行理论分析的同时，还开发了满意的仿真软件，一了其应用价值。     

多向编织碳／碳复合材料力学行为研究

本文综述了作者近十年来在多向编织碳／碳复合材料力学性能研究方面的成果，包括力学模型与强度准则、热应力分析、断裂行为、性能预报与优化设计、超高温试验技术及组织性能与高温退化等内容，并分析了其存在的新问题和解决途径。     

三维图元的设计及其在遥测数据可视化中的应用

设计了接口良好、通用性强、运行速度快、视觉效果良好的三维图形元。以设计某型无人直升机三维图元为例进行了详细测试和实际应用 ,收到了满意效果。     

卫星定位导航系统中各因素对D-R定位算法精度的影响

D- R定位算法在理论上可以用于定位。在实际工作中 ,用户的定位精度是进行定位时首先需要考虑的问题。文中主要讨论 D- R算法本身固有的定位误差。首先根据 D- R算法的定位公式推导出算法的精度误差因子。然后根据卫星定位导航系统的工作过程 ,确定了影响用户定位精度误差因子的因素并对这些因素对精度误差因子的影响进行了计算机仿真。仿真结果证明 D- R定位算法在一定条件下可以满足用户对定位精度的要求 ,用户精度误差因子可与现有的 GPS系统相当。     

传输/反射法测量复介电常数的三个方程研究

介绍了利用传输／反射参数测量复介电常数的三个方程。利用奇偶模方法分析传输线与二端口网络，得到传播常数与归一化特性阻抗的解析解。进而得到确定复介电常数的三个方程。利用这些方程仅用一次测量解决已有传输／反射法中存在的低损耗材料的厚度谐振问题、多值性问题及其它问题。讨论了利用这三个方程通过一次测量解决上述问题的方法并分析了这些方程的测量不确定度。最后给出了实验结果。     

某型工程车多功能检测仪的硬件设计

设计的检测仪用于检测某型工程车的电控系统,以51单片机作为中央处理单元,以MAX392多路选择器实现多路选通,以CPLD扩展外围接口,可较好地实现信号的采集、存储和信息显示等功能。检测仪还具有代用功能,在紧急情况下可代替原车电控系统进行工作。