用多重网格方法计算旋翼跨声速无粘流场

发展了一种加快悬停旋翼无粘流场计算收敛速度的多重网格方法。由于悬停旋翼流场中存在不可压区域，同时旋翼尾涡系统的发展需要较长的时间，使得旋翼流场的收敛速度远低于固定翼流场，因此研究旋翼流场的多重网格算法具有重要意义。空间离散格式采用了中心有限体积方法，时间推进应用了五步龙格-库塔法。采用3层网格的V循环，对一跨声速悬停旋翼无粘流场进行了数值计算。计算结果表明：尽管多重网格方法对旋翼流场的加速收敛作用不如对固定翼流场的加速收敛效果，但是多重网格方法仍然可以显著地加快旋翼流场收敛。     

基于Euler／N—S方程的跨音速非线性静气动弹性问题研究

在C-H网格的基础上,采用Jameson的中心差分有限体积法求解Euler/N-S方程,采用结构影响系数法计算结构的弹性变形,用三角元面积加权法和常体积转换法(CVT)实现流固耦合,计算了弹性后掠机翼在跨音速状态的静气动弹性问题     

Study on the Microstructure and Dielectric Properties of Barium Strontium Titanate Thin Films Prepared by Sol-gel Method

Sr05Ba0.5-xBixTiO3 （BST） thin films were fabricated on a Pt/SiO2/Si substrate by the sol-gel method. Then follows an investigation of the influeoces of bismuth （Bi） on the microstructures and the dielectric properties of Sr0.5Ba0.5-xBixTiO3 （BST） thin films. The microstructures of the BST thin films were examined by the XRD and the TEM techniques. Tetragonal perovskite crystal grains were observed in BST thin films. Increasing Bi^3＋ doping ration in BST will lead to decrease of the grain size. It is found that Bi^3＋ doping decreases the dielectric loss and improves the frequency dispersion of the BST thin films. Not only is compressed the peak of temperature-dependence of dielectric constant of Bi^3＋-doped BST thin films but also moves into the low-temperature region. Moreover, the average Curie tem- perature decreases gradually with the Bi^3＋ contents increasing.     

轮盘应变疲劳寿命可靠性分析方法

为较准确评估应变疲劳寿命可靠性，通过引入两个相关随机变量对Coffin-Manson公式随机化，发展了一种轮盘应变疲劳寿命可靠性分析概率模型。对线性回归残差重新定义，使得到的回归参数不随坐标系的选取发生变化。采用响应面法和蒙特卡洛模拟相结合的方法获得轮盘危险点应变幅的分布，最后通过多次解非线性方程数值模拟得到轮盘危险点应变疲劳寿命分布及其可靠寿命。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

先进复合材料格栅结构制造工艺技术的研究进展

介绍了复合材料格栅结构的特点及发展现状,并回顾了传统复合材料成型工艺方法和格栅结构的早期制造方法。另外,介绍2种新型的格栅结构加工方法,即混合加工法、膨胀模块加工法以及改进的格栅结构:互锁复合材料格栅结构、加套管的槽形连接格栅结构和TR IG结构;并分别说明了每种结构的优点。其中重点介绍了混合加工法并从理论上推导其可行性。最后总结了复合材料格栅结构制造工艺的发展趋势。     

真空羽流场的 N-S 和 DSMC 耦合数值模拟

根据调姿发动机真空羽流场的特点,采用差分求解Ｎ－Ｓ方程数值模拟喷管内流场,用ＤＳＭＣ方法数值模拟喷管外羽流场,得到了符合流动规律的数值模拟结果。为姿控发动机喷管设计提供了参考,并为真空羽流污染研究打下了良好的基础。     

论定常不可压粘流的积分方程解法

本文对定常不可压粘性绕流积分解法中的涡量迭代过程、涡量边界条件的提法以及压强系数的计算等方面都作了改进,使数值解更易于稳定收敛并提高精度。为了验证本文的方法,对低雷诺数下的圆柱绕流进行了计算,结果表明计算效率是高的,迭代过程是稳定的。将本文方法推广到三维流动没有原则上的困难。     

刚度导数法在含裂纹铆接加筋板应力强度因子计算中的应用

本文探讨了刚度导数法用于含裂纹铆接加筋板应力强度因子计算的问题。提出了选取对刚度导数矩阵有贡献元素的一种新方法,成功地解决了裂尖位于筋条轴线附近时,采用刚度导数法计算应力强度因子的困难。算例结果表明,本文提出的方法是正确有效的。文中还阐述了刚度方程降阶的方法,这种方法对于应用小容量计算机求解较大的结构分析问题,有一定的参考价值。