Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

复合材料三角形层板稳定性分析与实验研究

 给出了正交异性三角形简支板和固支板临界载荷的计算方法。对5种不同铺层的14块碳/环氧层板进行了稳定性实验研究。理论预测与实验结果基本一致。     

航天飞机三维最优再入轨道及气动加热过程

本文应用现代控制理论研究了航天飞行器三维最优再入轨道和与轨道参数密切相关的气动加热过程。文中选择飞行器迎角和倾斜角作为控制变量,以飞行器气动加热率和飞行过载沿轨道积分最小作为优化性能指标,按极大原理导出最优再入轨道有约束控制的非线性两点边值问题。采用了数值优化方法——共轭梯度法求解有升力飞行器的最优再入轨道及其热过程。文中以允许误差法讨论了权系数和罚函数的选取方法;对不同速度范围研究了不同的加热模型;按热平衡方程与优化轨道同步迭代的方法求得了算例数值结果。算例的数值结果与文献[13]的量值是一致的。     

基于相空间重构的网络流量RBF神经网络预测

应用混沌理论，分析了网络流量，用单变量的网络流量时闯序列重构与网络动力系统等距同构的相空间，进而计算了实际网络的关维数和Lyapunov指数，并证实了网络流量存在混沌特性；据此建立了基于径向基函数（RBF）神经网络的模型，并对实际网络数据流进行了预测。仿真结果表明，相对于其他前馈神经网络预测，基于混沌理论的RBF神经网络预测方法学习速度快，预测精度高。     

关于拟线性椭圆型方程在广义Sobolev空间中解的正则性

本文讨论了下面方程Ｄｉｒｉｃｈｌｅｔ问题在广义Ｓｏｂｏｌｅｖ空间中解中的正则性－ｄ／ｄｘ１ａ１（ｘ，ｕ，Ｄｕ）＋ａ（ｘ，ｕ，Ｄｕ）＝０，ｘ∈Ω其中Ω∈Ｒ是有界区域，证明了上述问题在Ｗ（Ω）和Ｗ（Ω）在存在有界广义解。     

航测法提取动态三维深度信息

目前提取三维信息,重建三维图像的研究很多,本文叙述的是仅用一台摄像机利用航测法来提取动态三维信息的方法。假设物体不动,移动摄像机。在移动摄像机前后,即在摄像机移动的相邻两点,可以得到模型的像片对,通过此像片对来实现同名点交会,求得未知点的三维深度信息。为此,首先要进行绝对定向,计算像片元素和确定各个坐标系。然后实现不依赖像片角定向元素的同名点空间交会;或实现利用对应轴系上的坐标进行空间交会。在此基础上,笔者充分利用先验条件和专家知识来确定飞机模型上的同名点,初步得到了飞机模型的轮廓侧视图。     

航天飞行中的稀薄气体动力学

飞船、宇航探测器、航天飞机等复杂外形航天器给气体动力学，包括稀薄气体动力学提出了新的要求。本文简要介绍了为计算过渡领域中气动力与热而发展的基于位置元概念的DSMC方法的通用算法。该方法解决了计算物面通量量的技术难点并已用于模拟圆球、飞船、类航天飞机的绕流。正在进行的航天实践，如麦哲伦飞船对金星的探测、行星大气中的气动制动、伽利略飞船的木星之行、尾屏蔽在太空中获得高真空的实验等等提出了新的气动力问题，稀薄气体动力学和DSMC方法是有力的工具。     

航天飞机防热瓦缝隙气动加热的讨论

本文根据航天飞机防热瓦缝隙流动的特点,从二维定常不可压缩层流的 N-S方程出发,提出了一个简化流动模型,即缝隙的二维流动可近似当作两个准一维沟槽流动的线性迭加,由此给出了缝隙中的热流率与压力、压力梯度和缝隙宽度的变化规律,并利用现有的实验结果作了验证。     

含闭链机构机器人动力学探讨

本文用Appell方程就含闭链机构机器人动力学研究作了新的探讨,给出了建立含闭链机构机器人动力学方程的一般方法。旨在把含闭链机构机器人分解成相应的开链机构进行研究,因而大大简化了推导过程。文中通过一个实际工业机器人动力学方程的推导,证实了该方法的可行性。     

缝合复合材料层板面内力学性能试验与分析

研究多种缝合方向、缝合密度对复合材料层板面内拉、压、剪等基本力学性能和典型失效模式的影响，并结合理论模型分析缝合参数影响层板力学性能的机理。结果表明，缝合对层板面内性能有一定影响，缝合密度的增加导致层板面内性能下降，缝合方向对层板性能影响较大；试件破坏位于缝合针孔处；缝合造成的纤维弯曲和纤维断裂引起了较强的应力集中，是缝合影响层板力学性能的主要因素。