Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

淬火／回火热处理对TiAl基合金晶粒细化的影响

研究了淬火/回火热处理中淬火温度和回火时间对Ti-48Al-2Cr-0.5Mo合金晶粒细化的影响。研究表明:一定的淬火/回火热处理能将大小约为1000μm的铸态组织细化成为18～30μm的均匀双态组织;TiAl基合金的细化效果严重依赖淬火阶段的加热温度,温度升高,得到的块状组织较细,羽毛状组织体积分数减少,在两相区回火时,高温淬火组织的回火组织较细,而时间的延长,晶粒长大,但不明显。     

钛合金高温钎焊接头的组织性能及影响因素评价

综述了钛及钛合金高温钎焊结构在现代工业中的应用。在分析了钛基钎料应用和发展的基础上，重点分析了钎焊接头的组织与接头性能的关系以及影响因素。指明接头组织中脆性金属间化合物相的存在形态是决定接头性能的主要因素，接头间隙和钎焊时间决定了接头的组织形态，从而影响接头的性能。钛及钛合金高温钎焊接头的拉伸性能、高温性能和疲劳性能是优越的，而接头氧化后的性能急剧下降。并展望了钛基材料连接的发展方向。     

TiAl合金不同钛铝比层片组织的稳定性

对钛铝比为１．１７４、１．１０５和１．０４１的（ＴｉＡｌ）－２．５Ｖ－１Ｃｒ（ａｔ％）合金层片组织在１３２３Ｋ热暴露中的组织变化进行了观察和分析。发现钛铝比对ＴｉＡｌ合金层片组织的稳定性和失稳分解机理有重要影响，钦铝比适当大于１：１（如１．１０５）的合金可以得到稳定性更好的层片组织。     

01420铝锂合金的搅拌摩擦焊接

对2 mm厚的01420铝锂合金薄板实现了搅拌摩擦焊接(FSW),分析焊接接头的微观组织形态,研究焊接工艺参数对搅拌摩擦焊接接头成型和接头性能的影响,并与氩弧焊接接头性能相比较.结果表明,当工艺参数选取得当时,焊缝成型较好,表面光洁,焊接接头的强度可达到母材强度的77%,接头的弯曲角可达到180°,均高于氩弧焊接接头.     

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl–ion concentrations. The results demonstrate that the Cl–ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples pas-sivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those pas-sivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni=9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.     

航空同步发电机的等效磁路模型

分析了航空同步电机的磁路结构特点，建立了电机的等效磁路模型，由等效磁路的拓扑结构导出其磁位非线性方程，再由磁路欧姆定律及铁磁材料的磁化曲线求出其数值解，计算了电机的空载特性和零功率因数负载特性，与实测结果非常接近。     

钼-铌合金原料品质对单晶制备的影响

主要讨论了钼-铌合金原料品质,包括烧结条的制备、原料的化学成分、原料棒的尺寸规格等对单晶制备的影响。结果表明:高温真空烧结钼-铌合金烧结条由于C、O等杂质含量过高,在20 kW电子束悬浮区域熔炼炉上区域熔炼时未能直接生长制备出单晶,但其经过两次电子束熔炼获得的Ф(12~17)mm原料棒C元素质量分数降为6.3×10-3%、O元素质量分数降低了近2个数量级,仅为1.4×10-3%,能稳定地生长制备出Ф31 mm×735 mm的大尺寸钼-铌合金单晶,而直径超过Ф18 mm或小于Ф11 mm原料棒在区域熔炼时未能获得钼-铌合金单晶。     

SCR技术制备A2017半固态材料及其触变性能的研究

单辊搅拌技术 (SCRShearing/CoolingRollProcess)技术制备的A2 0 17半固态材料比常规铸造坯组织优良 ;SCR技术制备的A2 0 17半固态材料在 5 30～ 5 70℃范围内 ,可以进行触变成形 ;半固态成形平均屈服强度比热加工时的屈服强度低 10MPa ;A2 0 17半固态材料触变过程分为四个阶段 ,稳定触变阶段A2 0 17半固态材料的触变性能稳定 ,半固态加工时容许的最大加工变形范围为 6 4 %～ 72 %。     

LC9高强度铝合金过时效工艺试验

通过对ＬＣ９高强度铝合金过时效工艺试验，并与ＬＣ９ＣＳ状态作性能对比，证实该材料具有良好的耐应力腐蚀及抗裂纹扩展性能，从而确认ＬＣ９ＣＧＳ３铝合金在飞机上推广使用的可行性。