对于动态目标的航天器鲁棒PD+快速跟踪控制方法

摘要：针对卫星对于空间动态目标快速、稳定地跟踪、控制目标，同时考虑平台模型的不确定性、外部随机干扰、系统控制力矩与角速度约束等因素，设计PD+控制器实现对于动态目标的快速、稳定跟踪；在经典PD控制器的基础上设计控制添加项使得系统能够按照既定轨迹运动；采用变结构的手段实现系统收敛速度的提升；合理设计Lyapunov函数的结构，引出角速度、四元数的耦合项对V函数进行改良，简化系统稳定性证明与分析的过程；讨论系统最极端情形，通过对V函数上下界的讨论分析系统该情形下的稳定性；最后通过数值仿真验证所提出算法的有效性与优越性.     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

基于最小一乘的跑道入口高度计算

跑道入口高度是关系着飞机能否安全着陆的关键参数,在其计算中需要采用曲线拟合预测的方法。目前大多是采用基于最小二乘准则的拟合方式。由于最小二乘准则的局限性,当下滑道随机误差不满足正态分布,在飞行数据中出现异常点时会给预测带来较大误差。将最小一乘方法引入到跑道入口高度计算问题中,提高了算法的稳健性,很好地克服了这一问题。     

飞机附件的维修间隔决策

研究了飞机附件软时限的设定和管理方法,该方法可将附件的故障发生机率和运行风险控制在可接受水平,减少航空公司因机务原因的延误,提高飞机可利用率。     

地球同步轨道薄膜太阳帆的姿态轨道控制方法

薄膜太阳帆（FSS）是集推进、发电和姿轨控功能于一体化的超大型挠性太阳帆式航天器，通过调整薄膜反射率产生可变推力和力矩，实现其姿态和轨道运动控制。结合薄膜太阳帆在地球同步轨道运行时的受力特性进行了轨道漂移分析。通过建立薄膜太阳帆动力学模型及受力模型，提出了调整帆面角度轨道修正方法以及基于薄膜光压力矩角动量卸载的长期在轨对日定向面内双轴动量轮稳定控制方法。通过系统仿真验证表明所提的轨道修正和对日定向控制方法是合理有效的，可使薄膜太阳帆长期在定点位置维持对日定向。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

大型平台的惯性稳定与地理坐标系姿态跟踪

介绍了一种大型两轴稳定平台的惯性稳定和地理系姿态跟踪原理,建立了稳定平台俯仰框架和横滚框架的运动学模型和动力学模型,进行了稳定平台横滚通道的角速度回路和角位置回路设计,仿真分析了姿态角测量误差作用下的稳定平台姿态跟踪性能,与利用加速度计反馈实现调平的两轴阻尼稳定平台进行对比,比对结果验证了本文设计的控制系统在水平姿态跟踪速度和抗干扰能力上的优势.平台样机进行了姿态跟踪测试,结果验证了结合定位定向系统(POS)的稳定平台惯性稳定和姿态跟踪控制方法可行.     

基于干扰观测器的天基观测航天器姿态控制设计

与地基空间目标监视系统相比,天基观测系统具有监视范围广,不受国界限制,观测精度高等优点,是未来空间目标观测技术的重要发展方向。但天基观测航天器工作时,相机转台的运动,太阳能帆板挠性部件的弹性振动与航天器的姿态运动相互影响,构成强耦合的非线性系统,传统的控制方案无法实现对这类天基观测航天器的高精度姿态控制。文章针对某一空间观测航天器的任务要求,设计了基于干扰观测器的前馈补偿航天器姿态控制系统,仿真实验结果表明:姿态角控制精度小于 0.06°,姿态角速度精度小于 0.03(°)/s,达到了精度要求。     

自主机动条件下的实时定轨方法

中继卫星在跟踪自主机动用户目标时,由于机动轨道未知,需要利用中继卫星下传的星载GNSS(Global Navigations Satellite System,全球导航卫星系统)数据进行实时轨道确定与预报,为中继卫星跟踪提供实时的引导信息,以方便中继卫星快速捕获目标和连续稳定跟踪。针对该类用户目标的任务需求,讨论了基于星载GNSS数据自主机动条件下的实时定轨方法,建立了连续推力机动力学模型。以某一型号卫星的实测数据进行分析验证,并对轨道机动进行辨识,计算的机动加速度和机动时间与试验单位提供的结果一致。针对卫星不同机动情况,5min的观测数据定轨预报10min的弧段,最大位置误差小于8km,可以为中继卫星快速捕获提供高精度的引导信息。     

基于快速非奇异终端滑模的姿态控制技术

针对存在执行器故障与外部干扰的刚体飞行器姿态控制系统,提出一种基于快速非奇异终端滑模(NSFTSM)的姿态容错控制方法.控制方法不仅保证姿态机动过程的快速性,而且避免了传统的终端滑模面所带来的奇异性问题.采用二阶鲁棒精确微分器估计执行器故障与外部干扰,采用快速非奇异终端滑模技术设计姿态容错控制律,根据Lyapunov稳定性理论证明了方法的稳定性.稳定性分析表明,通过引入新型快速非奇异终端滑模,控制器使得闭环系统能够快速收敛到滑模面的微小邻域内,进而收敛到系统平衡点的微小邻域内,并且系统对外部干扰具有较强的鲁棒性.数值仿真结果验证了方法在姿态跟踪控制中的有效性.