液体天然橡胶对湿法混炼制备天然橡胶/白炭黑复合材料性能的影响

采用湿法混炼工艺制备天然橡胶/白炭黑(W(NR/SiO_2))复合材料,并采用液体天然橡胶(LNR)为增容剂,探讨了LNR对复合材料硫化特性、橡胶加工性能、白炭黑分散性、静态力学性能及动态性能的影响。结果表明:LNR具有较好的增容效果;使用LNR增容后,胶料的正硫化时间缩短,在白炭黑为70 phr时T_(90)缩短4.16 min,加工性能改善;白炭黑在NR中的分散性提高;胶料力学性能得到改善,在白炭黑为60 phr时最明显,拉伸强度和撕裂强度分别提高25.73%和66.59%;LNR增容后胶料的抗湿滑性提高且滚动阻力降低。复合材料良好的相容性是LNR与NR和白炭黑两相同时发生作用形成增容界面的结果。     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

电机变频控制实现换热器节能的应用研究

结合寒冷地区气候特点与通信机房温控的现状,针对50%浓度乙二醇溶液为工质的换热器,试验研究了自然冷源利用率与换热器自身变频节能的关系。结合乙二醇冷剂的特性,通过建立功率与频率关系模型、温差与功率和频率关系模型,实现了换热器循环泵和风机的变频控制策略。结果表明:在室内外温差、换热功率与循环泵、风机频率同时满足的条件下,以功率模型作为参数进行换热器自身的变频节能是可行的。通过对哈尔滨地区的气候数据与散热房控温试验分析,证明了乙二醇换热器的变频节能效果。     

扑旋翼飞行器气动特性分析及机翼拓扑优化设计

建立微型扑旋翼飞行器运动学模型,基于面元法研究低雷诺数下非定常场中扑旋翼飞行器的气动特性,得到机翼气动特性和一个工作周期内的最大气动载荷。建立扑旋翼飞行器机翼有限元模型,基于变密度法和独立连续映射法(Independent continuous mapping,ICM)对机翼进行静力学和动力学拓扑优化设计,通过改变机翼拓扑结构优化机翼模态频率,得到同时满足结构静力学和动力学要求的扑旋翼飞行器机翼拓扑结构。本文为扑旋翼飞行器机翼结构优化设计提供了基本思路和研究基础。     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

基于锁相环的光电振荡器频率稳定化研究

通过构建小数分频锁相环,将一个工作于X波段的OEO(OptoElectronic Oscillator,光电振荡器)与OCXO(Oven-Controlled Crystal Oscillator,恒温晶体振荡器)进行锁相,得到了输出信号相位噪声和长期频率稳定度的提升。从PLL(Phase-Locked Loop,锁相环)环路传输特性出发,理论分析了PLL输出信号环路带宽内相位噪声水平和作用范围。为降低OEO整体的相位噪声,采用SIL(Self-Injection-Locking,自注入锁定)使OEO在10Hz~10kHz频偏处的相位噪声得到20dB以上的抑制。在此基础上将此SIL OEO与一个频率为100 MHz的OCXO锁相,获得了频率为9.95GHz、相位噪声为-55dBc/Hz@10Hz和-124dBc/Hz@10kHz的微波信号输出,其频率的重叠阿伦方差在100s平均时间内达到1.14×10~(-11),证明了提出的方案对提升OEO频率稳定性具有一定的实际意义。     

采用霍尔传感器的旋翼频率采集设计

为达到对旋翼飞机的控制,需要对旋翼转速进行采集.霍尔转速传感器以其高可靠性等优点常被用来测量转速.介绍了一种使用霍尔传感器进行旋翼转速采集系统,包括硬件构架,逻辑采集单元和软件设计,并给出了优化策略;通过试验数据分析,采集精度达到了预期.     

基于分频段加权的加速振动试验方法

振动环境工程研究现行采用的加速试验方法中,都只考虑了加速因子与频率无关这种情形,这不仅提高了试验设备的推力要求,也增加了位移指标要求。文章提出了一种分频段加权的加速振动试验方法,即通过对低频段加速因子的权重的优化设计,实现较小的位移指标要求,且疲劳损伤累积等效。给出了基于Dirlik方法和TB方法疲劳损伤等效的加速试验设计方法和工程实现流程。针对该方法开展了应用实例的计算,结果表明:在疲劳损伤等效的前提下,显著降低了振动台的位移,且推力基本维持不变。     

带凸肩叶片的断裂故障分析

某型发动机风扇带凸肩的转子叶片发生断裂故障。断口分析表明其为疲劳裂纹特征,其疲劳源在叶盆侧凸肩工作面下侧靠近叶片前缘位置。根据微观分析结论,建立了风扇叶片三维实体模型,利用有限元方法分析了叶片的振动模态。结果表明：叶片在工作时,由于结构的激振可能发生某些阶次的共振,其应力分布与断口分析结果较一致,初步判断叶片是由于共振而发生了疲劳断裂。     

基于直升机/ 发动机综合模型的变旋翼转速控制研究

为了实现直升机旋翼转速在宽广范围内连续变化且涡轴发动机连续提供输出轴功率,采用1种扭矩序列转移控制方案来实现该传动链。通过2台涡轴发动机和2台多级变速器与旋翼协调工作,发动机依次连接或脱开旋翼,提供旋翼转速大范围内变化,并提供旋翼连续变化的功率。在扭矩转移过程中,针对发动机扭矩强扰动问题设计了鲁棒LMI控制器+ADRC扭矩前馈补偿控制器,最后基于直升机／发动机综合模型进行数值仿真,验证了扭矩转移方案的可行性。仿真结果表明：在转移过程中的扭矩强扰动对发动机动力涡轮转速的影响较小,旋翼转速可以实现较大范围内的快速平滑变化。