基于INS/前视声纳组合的输水隧洞AUV巡检定位方法

当潜航器(AUV)进行输水隧洞巡检时,多普勒测速仪(DVL)声波会对前视声纳图像产生干扰,针对这一问题提出了一种从AUV上卸载DVL,直接从前视声纳图像中提取栽体速度,而后和惯性测量单元(IMU)进行组合导航的方法.该方法根据前视声纳成像原理,建立起每相邻两帧声纳图像间载体的相对位移与配对特征点的图像坐标之间的联系,针对水底为局部平坦区域的情况,对特征点仰角进行了估算.通过惯导速度约束和随机抽样一致(RANSAC)算法,剔除误差较大的配对点,然后利用提取出的载体速度作为观测量进行卡尔曼滤波.经实际数据测试,惯性导航系统(INS)/前视声纳组合的总体性能和INS/DVL组合非常接近,以输水隧洞内的接缝线作为定位基准,INS/前视声纳组合导航在沿隧洞方向上的最大相对定位误差小于行程的1％.     

选择性激光烧结尼龙材料及其挡水板制件性能研究

采用SLS尼龙12设计并成形了某箭体低承载挡水板薄壁结构,重点就SLS尼龙12及其碳纤维增强材料的力学、热学、断口微观形貌以及制件SLS工艺参数进行了研究。研究表明,选用牌号X1556尼龙12作为挡水板材料,其无缺口冲击强度81.2 kJ/m~2,断裂伸长率26.9%,烧结窗口温度差26.0℃,材料具备良好的抗冲击强度、断裂韧性和较宽的烧结窗口温度范围。优化设置成形工艺参数,如预铺粉起始温度为155℃,预铺粉保持温度168℃,加工温度169℃,填充速度4 000 mm/s,成形的挡水板制件外观良好,并且该制件通过了防水及耐热试验考核验证,为SLS尼龙成形技术在航天领域中的拓展应用打下基础。     

Hardware qualification for scientific ballooning missions

The European Stratospheric Balloon Observatory (ESBO) initiative aims at simplifying the access to stratospheric balloon missions. We plan to provide platforms and support with instrument design in order to support scientists. During the design process, the inevitable question of qualification for the harsh flight conditions arises. Unfortunately, there is no existing standard for qualification of stratospheric ballooning hardware. Thus, we developed a qualification procedure for use within ESBO and similar projects.In this paper, we present our analysis of the environmental conditions in the stratosphere. While conditions at typical balloon float altitudes are similar to the space environment, there are also some relevant differences. For example, the thermal environment is dominated by radiation and thermal conduction, but the remaining atmosphere still supports a certain amount of convection. The remaining atmospheric pressure in the stratosphere also leads to reduced arcing distances. Vibrational loads are far less than for space missions, but quasi-static or shock loads may occur. The criticality of radiation increases with mission duration.Based on the environmental conditions, we present the qualification procedures for ESBO, which are based on the European Cooperation for Space Standardization (ECSS) standards for space systems. Overtesting against too high requirements leads to overengineering, driving mission cost and mitigating the advantages of balloons over space missions. Therefore, we modified the ECSS standards to fit typical scientific ballooning missions over several days at altitudes up to 40 km. Furthermore, we analyzed design rules for space systems with regard to their relevance for scientific ballooning, including material and component selection. We present the experience from the hardware qualification process for the ESBO prototype STUDIO (Stratospheric UV Demonstrator of an Imaging Observatory). Even though boundary conditions are different for each individual mission, we aimed for a broader approach: We investigated more general requirements for scientific ballooning missions to support future flights.