铝蒙皮涂装施工用的水溶性脱漆剂

本文研究的是以苯甲醇替代二氯甲烷为主溶剂的水溶性脱漆剂，它和传统的二氯甲烷型脱漆剂相比，毒性更小、对使用者的安全及身体健康元不利影响，且脱漆速度相当。通过对脱漆剂使用的研究和对比，结果证明，它对环氧类涂料、环氧锌黄底漆等都适用，尤其对于飞机蒙皮漆有良好脱漆效果。该脱漆剂具有原材料易得、对基才腐蚀性小、适用范围广、不燃烧等特点，一般常温下在30分钟内使可将漆膜溶胀。其与制工艺简单，涂覆方便、不易挥发、贮存较稳定，重涂性能好，对基村的后处理无不良影响。     

空间站废水的处理及管理

长期载入飞行的空间站需要大量的用水，为解决由此引起的巨大的维持飞行的运行费用，需要实现水的再生与闭路循环，如何针对空间站废水的特征，解决废水的处理与利用问题，并建立合理的水循环体系是这一工作的关键，文中分析，比较了空间站废水的处理方法，设计了空间站水管理整合方案，并多方面探讨和验证这一方案的合理性和可行性。     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

OSIRIS-REx low-velocity particles during outbound cruise

We analyzed high-angular rate streaks first recorded by OSIRIS-REx’s MapCam during a 2017 search for Earth Trojan asteroids. We interpret them as water-ice particles that translated across the imager’s field of view, originating from the spacecraft itself. Their translation velocities approximated 0.1–1?m/s based on reasonable conclusions about their range. Pursuing several lines of investigation to seek a coherent hypothesis, we conclude that the episodic releases of the water ice particles are associated with spacecraft attitudes that resulted in solar illumination of previously shadowed regions. This correlation suggests that the OSIRIS-REx spacecraft itself possesses micro-climatic zones consisting of hot regions and cold traps that may temporarily potentially pass volatiles back and forth before losing most of them.     

Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff, and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.     

Analysis of total visual and CCD V-broadband observations of Comet C/1995 O1 (Hale-Bopp): 1995–2001

We developed a general method for determination of water production rates from groundbased visual observations and applied it to Comet Hale–Bopp. Our main objective is to extend the method to include total visual magnitude observations obtained with CCD detector and V filter in the analysis of total visual magnitudes. We compare the CCD V-broadband careful observations of Liller [Liller, W. Pre-perihelion CCD photometry of Comet 1995 O1 (Hale-Bopp). Planet. Space Sci. 45, 1505–1513, 1997; Liller, W. CCD photometry of Comet C/1995 O1 (Hale-Bopp): 1995–2000. Int. Comet Quart. 23(3), 93–97, 2001] with the total visual magnitude observations from experienced international observers found in the International Comet Quarterly (ICQ) archive. A data set of ∼400 CCD observations covering about the same 6 years time span of the ∼12,000 ICQ selected total visual magnitude observations were used in the analysis. A least-square method applied to the water production rates, yields power laws as a function of the heliocentric distances for the pre- and post-perihelion phases. The average dimension of the nucleus as well as its effective active area is determined and compared with values published in the literature.     

全顺汽车车身涂装底漆线投槽工艺

从配方、操作方法、原理等方面介绍了全顺汽车车身涂装底漆线的投槽工艺。较为详细的介绍了涂装前处理工艺和电泳工艺部分的清洗工序。本文对水质的影响也做了简要的分析。     

关于对喷水室热工计算公式的分析及修正

通过分析喷水室内水和空气之间的热质交换过程，指出目前采用的热工计算公式的不足，并在此基础上推导出喷水室热平衡方程新公式，对理论教学起到一定的指导作用。     

“水”——沈从文人格和文格的象征

文章通过审视沈从文在《湘西》和《湘行散记》中对水的独特感悟,揭示出“外柔内刚”、“善利万物而不争”既是沈从文的人生态度,也是其构筑的“湘西世界”的艺术取向。     

飞机机头附近液态水含量分布规律的数值研究

在飞行器飞行过程中,安装在机头上的各类传感器结冰会对飞机的飞行安全产生不利影响。而液态水含量是影响飞机结冰的重要参数,为了更好地进行传感器结构及布局设计,对机头附近液态水含量分布规律进行数值研究。采用计算流体力学方法对飞机飞行时的空气-过冷水滴的稀疏两相流场进行数值模拟,通过求解N-S方程获得空气流场,采用欧拉法求解水滴运动场得到水滴运动轨迹。分析在不同来流马赫数、来流迎角及液滴直径等条件下,机头关键截面上广义水滴遮蔽高度的变化及机头关键位置上液态水含量的变化规律,研究不同状态参数对液态水含量分布的影响。结果表明:水滴遮蔽高度及浓度增加区范围随马赫数增大而增加,迎角的变化对机头上下表面液态水含量分布产生相反的影响。