时频测量的新技术——相位重合点检测技术

近年来相位重合点检测技术和周期性信号参数测量各种高精度的方法在国内外得到了广泛应用。对这种新技术的基本原理、所派生的频率、周期、相位差和时间间隔测量方法作了介绍。这些新方法测量精度高,测量频率范围宽,设备构成比较简单,在时频测量领域将获得越来越广泛的应用,可能逐渐取代已有的某些测量技术,并可在其它量测量领域获得推广。     

模拟月壤研制的初步设想

模拟月壤是月球样品的地球化学复制品，作者总结世界上已有的5种模拟月壤JSC-1，MLS．1，MLS-2，MKS-1和FJS-1的研制过程、方法与基本理化性质，认为系列化模拟月壤研制对中国首次月球探测有重要意义，在此基础上，作者提出系列化模拟月壤研制的基本思路．     

双向卫星时间与频率传递温度效应

卫星双向时间与频率传递是高精度的时间比对,外界环境的变化将会影响到比对精度,温度的影响更是不可忽视[1]。以NTSC(国家授时中心)台站与NICT(日本国家情报与通信技术研究所)台站几年来的数据为基础,讨论了双向比对结果与环境温度的相关性。在温度超过12℃时,两站的时间差与环境温度成正比例关系;温度低于12℃时,两站的时间差成反比例关系。证实了对上、下变频器以及低噪放大器采取恒温措施的必要性。     

A320系列飞机机身抖动现象浅析

针对A320系列飞机在营运过程中产生间断性水平或垂直抖动故障，分析了产生抖动的原因，并通过更换作动器或操纵面铰链排除了抖动故障．同时提出了避免A320系列飞机交替产生不稳定因素的措施。     

Abnormal changes of dynamic derivatives at low reduced frequencies

A number of studies have found that abnormal changes of dynamic derivatives occurred at very low reduced frequencies, but its inducement mechanism is not very clear. This paper has researched the abnormal changes and analyzed the influence on some parameters by solving the unsteady flow around forced oscillation airfoils based on Navier-Stokes equations. Results indicate that when the reduced frequency approaches to zero, the dynamic derivatives obtained by the numerical method will diverge. We have also proven it in theory that this phenomenon is not physical but completely caused by numerical singularity. Furthermore, the abnormal phenomenon can be effectively mitigated by using the time spectral method to solve the aerodynamic forces and the integral method to obtain the dynamic derivatives. When the reduced frequency is in the range of 0.001–0.01, the dynamic derivative maintains nearly unchanged for the whole speed region. This study can provide a reference for the reasonable choice of the reduced frequency in calculations and experiments of dynamic derivatives.     

基于经验模分解的PPP时间比对数据消噪方法

精密单点定位(PPP)时间比对数据会受到观测噪声的影响，因此对时间比对数据进行消噪是一项重要工作。提出一种基于经验模分解(EMD)的PPP时间比对数据消噪方法，并将该方法与Vondrak滤波方法的消噪效果进行对比。结果表明，两种方法的消噪效果相当，均能有效滤除PPP时间比对数据中的随机噪声，明显改善时间比对的稳定度。     

Data reduction and correction algorithm for digital real-time processing of cosmic ray measurements: NM64 monitoring at Dourbes

We present a data correction algorithm for real-time data processing for the NM64 galactic cosmic ray neutron monitor at the Royal Meteorological Institute (RMI) in Dourbes, Belgium. The correction is based on three main tests: a continuity test, tube ratios test and a derivative test. The continuity test works as a high pass filter with a threshold based on the entire recorded dataset. Additionally, it monitors whether the logging takes place at regular intervals (continuously). The ratios test identifies noisy sections and the final derivative test criterion will identify single or double spikes by testing them against the median increase of the intensities. Using these criteria, all data from the cosmic ray station at Dourbes is corrected in real time. Test results have been compared with data from verified neutron monitor stations with a similar geomagnetic cutoff rigidity.     

基于模型的装备维修性设计控制技术

伴随数字化设计方法日趋成熟,飞机装备维修性设计面临如何与三维数字化设计环境下功能性能设计同步的难题。对比分析了数字化环境维修性设计与传统维修性设计的主要差别,提出了基于飞机装备数字化设计环境维修性设计流程,研究了维修性设计参数的表达模型以及维修性参数信息在三维设计数字环境中的转化、集成与利用方式。基于图论和网络节点框图,提出了一种以节点网络图、单节点维修时间模型、维修过程时间模型为表征的飞机装备维修性设计与控制方法。经实例验证,提出的这套基于数字模型的维修性设计技术,对装备在数字化设计环境下同步开展维修性设计具有一定的工程指导价值。     

Median filtering algorithms for multichannel detectors

Particle detectors of worldwide networks are continuously measuring various secondary particle fluxes incident on Earth surface. At the Aragats Space Environmental Center (ASEC), the data of 12 cosmic ray particle detectors with a total of ∼280 measuring channels (count rates of electrons, muons and neutrons channels) are sent each minute via wireless bridges to a MySQL database. These time series are used for the different tasks of off-line physical analysis and for online forewarning services. Usually long time series contain several types of errors (gaps due to failures of high or low voltage power supply, spurious spikes due to radio interferences, abrupt changes of mean values of several channels or/and slowly trends in mean values due to aging of electronics components, etc.). To avoid erroneous physical inference and false alarms of alerting systems we introduce offline and online filters to “purify” multiple time-series. In the presented paper we classify possible mistakes in time series and introduce median filtering algorithms for online and off-line “purification” of multiple time-series.