Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

A first step towards proton flux forecasting

We present a preliminary version of a potential tool for real time proton flux prediction which provides proton flux profiles and cumulative fluence profiles at 0.5 and 2 MeV of solar energetic particle events, from their onset up to the arrival of the interplanetary shock at the spacecraft position (located at 1 or 0.4 AU). Based on the proton transportation model by Lario et al. [Lario, D., Sanahuja, B., Heras, A.M. Energetic particle events: efficiency of interplanetary shocks as 50 keV E < 100 MeV proton accelerators. Astrophys. J. 509, 415–434, 1998] and the magnetohydrodynamic shock propagation model of Wu et al. [Wu, S.T., Dryer, M., Han, S.M. Non-planar MHD model for solar flare-generated disturbances in the Heliospheric equatorial plane. Sol. Phys. 84, 395–418, 1983], we have generated a database containing “synthetic” profiles of the proton fluxes and cumulative fluences of 384 solar energetic particle events. We are currently validating the applicability of this code for space weather forecasting by comparing the resulting “synthetic” flux profiles with those of several real events.     

利用栅网控制空间等离子体环境效应模拟中的等离子体参数

通常采用ECR等离子体源产生的等离子体的温度和密度都比较大，通过附加适当目数的栅网，并在栅网上加一定的偏置电位来对等离子体参数，尤其是温度，密度进行调整，满足空间等离子体环境模拟要求，本文利用14目，25目的栅网，对已有的地面实验室空间等离子体环境进行了改进，得到了更加接近空间等离子体参数的一个地面模拟环境。     

空间碎片防护结构设计优化理论方法研究

航天器空间碎片防护结构设计优化在国际上属前沿课题，防护结构设计优化理论方法是其关键技术之一。在防护优化理论模型及其优化算法研究方面取得了突破性进展，建立了综合各类典型防护结构构型的统一的防护优化数学模型，提出了解决防护优化问题的几种算法：混合遗传算法，改进的差异演化算法和混合差异演化算法。最后采用航天器防护优化算例对防护优化理论方法进行了测试考核，优化结果表明了本文工作的可行性和有效性。     

Radiative and hybrid cooling of infrared space telescopes

The designs of cold space telescopes, cryogenic and radiatively cooled, are similar in most elements and both benefit from orbits distant from the Earth. In particular such orbits allow the anti-sunward side of radiatively-cooled spacecraft to be used to provide large cooling radiators for the individual radiation shields. Designs incorporating these features have predictedT _tel near 20 K. The attainability of such temperatures is supported by limited practical experience (IRAS, COBE). Supplementary cooling systems (cryogens, mechanical coolers) can be advantageously combined with radiative cooling in hybrid designs to provide robustness against deterioration and yet lower temperatures for detectors, instruments, and even the whole telescope. The possibility of such major additional gains is illustrated by the Very Cold Telescope option under study forEdison, which should offerT _tel5 K for a little extra mechanical cooling capacity.     

关于天地往返运输系统动力装置

本文对未来天地往返运输系统宜采用的动力装置方案提出一些看法,着重阐明液氧/烃类/液氢三组元推进剂发动机的优点。     

天地往返运输系统空气喷气组合式发动机方案探讨

本文初步探讨了用作天地往返运输系统推进装置的组合发动机,估算了其性能、尺寸、重量以及使用这些发动机时的运载能力。     

美国航天运载系统发展动态

本文是任新民同志1987年9月在航天部推进专业会议上的讲话,主要介绍美国国家航空航天飞机计划、航天飞机Shuttle 2的设想以及美国对研制大运载系统及动力装置的一些情况。     

美国用于空间站辐射器中的热控涂层

综述了六种美国可用于空间站辐射器中的热控涂层。从涂层的性能、价格、质量以及成熟性研究，对这六种热控涂层进行了评价。结果表明，Z－93型热控涂层最适合用于空间站的辐射器中，镀银F－46薄膜型热控涂层次之。     

多层打孔隔热材料空间应用热性能研究

在分析了空间多层打孔隔热材料中导热和辐射的复合传热问题的基础上,提出了空间多层打孔隔热材料反射屏温度计算的模型以及内部辐射数值分析模型.利用该模型对不同几何、物理参数下的对象进行模拟计算,通过对计算结果的分析,明确作为几何参数的层密度和层数以及作为表面特性参数的黑度和打孔率对材料热性能的影响.该热性能的研究对提高空间多层打孔隔热材料的隔热效果,实现材料的优化设计具有积极的指导意义.