一种高灵敏度的电动舵机系统研究

本文研究了一种基于单片机的高灵敏、分体式小型电动舵机系统。首先分析了电动舵机的组成与功能，并分别从舵机结构、控制算法两方面对舵机系统的性能设计进行了分析和阐述。针对舵机高灵敏度的性能要求，对控制算法进行了优化并进行了相应仿真。最后经过试验验证，电动舵机满足了高灵敏度的指标要求，验证了控制算法的正确性。     

复杂电磁环境下无线接收机电磁兼容快速测试技术应用CSCD

复杂射频电磁环境下,无线接收机作为主要的敏感设备,其电磁兼容性直接影响着整个武器装备的电磁兼容特性. 本文针对GJB 151B中对于接收机非线性测试方法的局限性,引入了一种利用自动双频测试系统对接收机干扰响应的快速测试方法;并搭建了实验室半实物仿真测试平台,检测了某接收机在（ 4-6 ） GHz组合频率干扰下的所有非线性的干扰响应通道. 测试结果对于评估接收机及其所在系统的外部电磁环境适应性具有重要参考价值.     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

Electromechanical actuators (EMAs) are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension) by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.     

基于H∞方法的控制系统作动器最优控制仿真研究

在设计控制系统模型时,首先引入了有限差分法(FDM)离散化后的波动方程,然后基于H∞最优控制原理,检查闭环控制系统的稳定性和可探测性,对控制系统传感器和作动器的位置进行优化配置.通过计算闭环反馈系统的范数,最终得到了控制系统的最优控制算法.仿真结果表明,利用波动方程来优化控制系统传感器和作动器位置的算法是可行的,可广泛应用于飞控系统的设计中.     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

基于非线性变换的加速度计误差标定与补偿CSCD

为提高三轴加速度计测量精度,分析其误差来源和产生机理,建立了误差模型;根据误差模型和重力场幅值不变特性,推导出非线性观测方程。引入两个未知的参数向量,通过数学变换把非线性观测方程变形为关于新未知参数的线性方程;然后采用批量最小二乘法求出新的未知参数,并根据误差模型参数和新未知参数之间的关系,利用逆解析运算求出对应的零点偏差、灵敏度误差和三轴不正交误差。实验结果表明,加速度计正负误差峰值间距可以减小100倍左右,精度可达10-3m/s2,并具有很好的可重复性。该方法算法效率较高,补偿效果显著。     

基于快速非奇异终端滑模的姿态控制技术

针对存在执行器故障与外部干扰的刚体飞行器姿态控制系统,提出一种基于快速非奇异终端滑模(NSFTSM)的姿态容错控制方法.控制方法不仅保证姿态机动过程的快速性,而且避免了传统的终端滑模面所带来的奇异性问题.采用二阶鲁棒精确微分器估计执行器故障与外部干扰,采用快速非奇异终端滑模技术设计姿态容错控制律,根据Lyapunov稳定性理论证明了方法的稳定性.稳定性分析表明,通过引入新型快速非奇异终端滑模,控制器使得闭环系统能够快速收敛到滑模面的微小邻域内,进而收敛到系统平衡点的微小邻域内,并且系统对外部干扰具有较强的鲁棒性.数值仿真结果验证了方法在姿态跟踪控制中的有效性.     

国外飞机机轮刹车系统的发展

阐述了航空机轮刹车系统最新的研究方向包括吸收能量更多并且更耐磨损的高密度碳材料,寻求更轻更强的结构部件材料,提升设计方法以优化刹车性能,机轮刹车系统的结构动力学研究,更大范围的电刹车装置和电刹车控制系统研究等。     

深度自编码观测器飞机操纵面快速故障诊断

为了避免扩展多模型自适应估计故障诊断方法中的雅克比矩阵计算,解决飞机精确模型难以获得的问题,降低在线故障诊断的计算量,提出了一种基于深度自编码观测器的飞机操纵面快速故障诊断方法.基于离线训练、在线估计的思想,采用量测的飞行数据训练得到不同故障下的飞机模型,代替扩展多模型自适应估计方法的卡尔曼滤波器进行状态估计;基于基础自编码器的隐层节点数选取经验公式,推导了两种深度自编码器的隐层节点数选取的递推公式.仿真结果表明,该方法无需精确的飞机模型,故障诊断速度快、精度高.