J2级经纬仪竖盘指标自动补偿误差不确定度

介绍了按照ＪＪＧ４１４—９４《光学经纬仪》检定、校准Ｊ２级经纬仪竖盘指标自动补偿误差时，依据“’９３国际指南”要求，对其测量不确定度进行的分析、计算。     

现代飞机俯仰跟踪时诱发振荡预测分析

根据飞机纵向ＰＩＯ的特点，提出了预测分析ＰＩＯ所用的人－机闭环系统数学模型，其中飞机采用等效系统数学模型，驾驶员操纵采用ＭｃＲｕｅｒ模型，参数按地面人－机模拟飞行跟踪试验确定，集中介绍了四种飞机纵向ＰＩＯ预测准则，Ｓｍｉｔｈ－Ｇｅｄｄｅｓ准则，修正带宽准则，增益，相位裕度准则，Ｎｅａｌ－Ｓｍｉｔｈ原则，并提供了相应的计算方法。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

基于装配约束的飞机导管几何特征建模与误差补偿

针对飞机导管实际装配过程中因装配应力大导致故障频发的问题,提出了一种基于导管装配特征的误差补偿方法.首先采用几何建模法进行了导管装配过程的几何建模,并提出了一种基于轴线矢量的导管装配模型建模方法.在此基础上,采用罗德里格旋转公式建立了基于实际装配工况下的导管空间位姿计算模型.然后基于导管装配要求进行了装配约束分析并识别...     

基于特征空间变换的运载火箭Pogo模型降阶方法

针对运载火箭Pogo状态空间模型存在维数高和奇异性的问题,开展了Pogo模型的降阶方法研究。基于特征空间变换理论,导出了一般形式的Pogo状态空间模型的解耦形式。该形式与推进系统和结构系统的模态频率相对应,从而通过模态截断或保留感兴趣的模态实现有效的模型降阶。同时,还给出了降阶方法的实数运算公式。在两种不同型号推进系统的火箭Pogo问题中进行了仿真校验。结果表明所提出的降阶方法对奇异和非奇异Pogo状态空间模型都能给出正确的降阶模型,显著地提高计算效率,具有很好的通用性,为Pogo时域仿真和主动抑制提供了合适的模型。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

激光陀螺四位置寻北仪提高精度方法

为消除激光陀螺零偏和常值漂移的影响,采用四位置方案来实现高精度寻北。本文简述了单轴激光陀螺四位置寻北方案,给出了陀螺敏感轴与机体系前向偏差角标定方法,研究了寻北仪在倾斜基座下数据补偿算法。本文研究了由于在四个位置上电机转动不到位所引起的误差补偿算法。通过对寻北仪系统测试,采用电机转动不到位补偿后数据标准差降低了0.02º,激光陀螺寻北仪系统达到了高精度快速寻北的要求。     

民机与民航产业投入产出分析

运用价值型投入产出模型,基于投入产出表,分析我国民机产业在国民经济中的地位、与各部门之间的相关联系、对其他部门的依赖性以及对国民经济的带动,并进一步与民航产业进行对比分析。研究结果进一步印证民机产业在国民经济发展中的重要性,为进一步争取国家政策支持提供理论基础和依据。     

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8?km parachute deployment point distribution error) than the baseline control scheme (8.4?km) and integral control scheme (5.8?km).