降落伞系统附加质量的研究

降落伞在减速系统中已被广泛地运用，但是其运动方程的确立，尤其是方程中的附加质量项，在中国却少有提及，为了弥补此点不足，文章对附加质量进行了较全面的阐述，从概念引入，在方程中的运用，确定方法及变化规律，到对稳定性的影响分析，对于降落伞此类轻质的，柔性的钝体，附加质量受到多种因素的影响，其规律可由试验数据得出，而由根轨迹图分析可知，附加质量对稳定下落时的降落伞系统稳定性有着重要影响。     

含噪图像的处理方法与评价

接收机还原出来的显示器视频信号的电磁泄漏发射含有大量的噪声 ,导致图像模糊 ,视觉效果差。为了改善图像质量 ,提高图像的可识别度 ,需要进行图像处理 ,提取我们感兴趣的信息。介绍了几种针对含噪图像的数字信号处理方法 ,并且进行了对比分析和信噪比评价。     

以激光束为基准测量工作台直线运动误差的原理探讨

提出一种以两束激光为基准测量工作台直线运动误差(五个自由度)的方法,并根据刚体运动学的基本原理导出了相应的数学模型。所获得的误差计算公式形式简单,计算方便,适用于实时、现场运动精度测量及补偿。     

Image restoration of the asymmetric point spread function of a high-resolution remote sensing satellite with time-delayed integration

The calibration and validation team of the Korea Aerospace Research Institute has calibrated and validated the image data of the KOMPSAT-2 since the launch of KOMPSAT-2 on July 28, 2006. The asymmetric phenomenon of the point spread function of the KOMPSAT-2 image data is evident in both the along and the across direction, most likely because KOMPSAT-2 has a 1 m ground sample distance high-resolution camera with time-delayed integration. Furthermore, because KOMPSAT-2 is in space, the KOMPSAT-2 image data has been corrected with good results by means of modulation transfer function compensation.     

Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题，提出一种轨迹规划及跟踪算法。首先，考虑到追踪航天器只沿本体X轴安装推力器，且推力方向固定，为了实现从起始位置转移至期望位置并满足姿态要求，基于三维螺旋线设计两阶段转移轨迹，根据初末位置以及末端速度方向要求，求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下，曲率积分最小。其次，为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力，需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进，提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵，将螺旋线在三维空间旋转，在不改变曲线形状的前提下满足初末位置及速度方向要求。然后，为了跟踪转移轨迹以及跟踪期望推力方向，提出基于CLF（Control Lyapunov Function）的滑模控制策略，当追踪星X轴与期望推力方向夹角较大时，采用CLF，保证最优性；当姿态误差收敛至滑模面附近时，切换为滑模控制，以提升系统鲁棒性。最后，通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

Effects of process parameters on mechanical properties of abrasive-assisted electroformed nickel

A cathode mandrel with translational and rotational motion, which was supposed to obtain uniform friction effect on surface, was employed in abrasive-assisted electroforming for revolving parts with complex profile. The effects of current density, translational speed and rotational speed on the deposit properties were studied by orthogonal test. The tensile strength, elongation and micro hardness value were measured to find out how the factors affected the properties. The optimized results show that changes of current density affect the tensile strength of nickel layer most, while translational speed has the most remarkable influences on both elonga-tion and micro hardness. The low rotational speed affects the properties least. In this experiment, a smooth nickel layer with tensile strength 581 MPa, elongation 17%and micro hardness 248HV is obtained by the orthogonal test.     

空间自旋目标平动补偿与微动特征提取方法

针对空间自旋目标平动补偿与微动(m-D)特征提取问题，提出一种基于延时共轭相乘和微动分解的平动补偿与特征提取方法。该方法通过延时共轭相乘处理实现目标加速度估计，然后构建冗余的微动原子集，对加速度补偿后信号进行微动分解补偿，通过搜索补偿信号的最大谱峰获取目标的微动特征与速度信息。仿真试验表明,所提方法能够有效估计空间自旋目标的运动参数，并快速提取其微动特征。     

G-16EP通用航空电瓶充放电及寿命研究

为了对G-16EP型电瓶进行维护和保养，根据电瓶厂家规定和适航规范，总结了该型电瓶的充电和容量测试（放电）方法，指出了影响电瓶寿命的主要因素，为该型号电瓶的维护提供了参考。     

基于反馈补偿K-means的救援物资需求预测

针对低空应急救援过程中救援物资需求的多样性与不确定性，提出基于反馈补偿K-means相似搜索的物资需求预测算法。通过比较非平稳数据处理方法，采用差分自回归平均移动模型（ ARIMA）对历史灾情数据进行平滑处理；将预处理后的灾情数据运用基于反馈补偿的K-means方法进行聚类分析；再对比夹角余弦，杰卡德相似系数以及相关系数这3种方法，搜索出相似度最大历史灾情案例，并线性求解当前低空应急救援所需物资量。实验结果表明，在基于反馈补偿K-means相似搜索的物资需求预测过程中，运用相关系数搜索的误差是最小的，方法不仅提高了大数据处理能力，而且在一定程度上提高了预测精度。