排序方式: 共有52条查询结果,搜索用时 453 毫秒
21.
转台作为一种常用的测试设备,一旦发生失控超速的“飞车”现象,将会带来比较严重的后果。介绍了一种基于MEMS陀螺的转台超速保护装置,指出了转台超速所带来的危害,描述了该保护装置的具体组成及原理,并通过Matlab仿真验证了该装置的可行性。在实践中应用该装置,取得了良好的效果。 相似文献
22.
Henzeh Leeghim Jaehyun Jin Sung-Hoon Mok 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2018,61(1):466-477
In this paper, a fundamental approach to analyzing the maneuverability of spacecraft with mounted control moment gyros is addressed by searching feasible angular momentum. The geometrical array of control moment gyros considered is a roof array also known as a 2-SPEED system. Due to the simplicity of the singularity envelope of the array considered, it is reasonably practical to conduct rotational performance analysis of the spacecraft. This maneuverability analysis technique uses a unique chart developed in this work, which allows a guaranteed maximum torque output and angular momentum at any time without concern about the singularity problem of the control moment gyros. Therefore, the purpose of this paper is to provide a conservative method for maneuverability analysis of a spacecraft with installed control moment gyros by searching allowable maximum angular momentum. This method is demonstrated using an illustrative example. 相似文献
23.
24.
MEMS陀螺仪随机误差的Allan分析 总被引:1,自引:0,他引:1
为了减少MEMS陀螺仪的误差并提高其精度,需要对陀螺仪误差进行估算与补偿,因而建立陀螺仪的随机误差模型。在陀螺仪随机误差模型分析方法中,有功率谱密度分析、时序ARMA模型及Allan方差分析。Allan方差分析是在时域上对信号频率稳定性进行分析的一种通用方法。通过分析Allan方差,可以分辨出存在于MEMS陀螺中的各种类型噪声。文中用Allan方差对MEMS陀螺仪进行具体分析,得到存在于陀螺仪信号中的各误差源。实验结果表明,Allan方差分析是建立陀螺仪随机误差模型的一种很实用的方法。 相似文献
25.
光纤陀螺以其优点适合空间飞行器定姿要求,但长期在轨飞行必须对光纤陀螺进行自标定。通常采用高维复杂陀螺模型计算实时性误差,而采用舍去状态量的降维模型影响系统定姿精度。针对这一问题,通过星敏感器观测,对高维陀螺模型进行可观测度分析,提出了一种基于模型预测的降维模型,将可观测度较低的状态作为模型误差进行预测估计,保证了系统精度并大大减小了计算量。半物理仿真结果表明此算法精度略高于高维模型自标定方法,计算量仅为高维模型的1/10,显著提高了系统的实时性。 相似文献
26.
三轴稳定通信卫星在地球指向模式下的陀螺标定 总被引:1,自引:0,他引:1
本文介绍三轴稳定通信卫星在地球指向模式下的陀螺标定方法和计算公式。转移轨道远地点火后及同步轨道在三轴稳定地球指向模式下的陀螺标定是利用地球敏感器、太阳敏感器和速率积分陀螺信号的遥测值标定陀螺常值漂移。 相似文献
27.
28.
29.
一种重力卫星质心在轨标定算法 总被引:1,自引:0,他引:1
针对重力卫星质心在轨标定问题,提出了一种将预测滤波与卡尔曼滤波相结合的标定算法。该算法首先利用磁力矩器产生一个明显大于干扰力矩的周期性力矩作用于卫星上,然后利用陀螺数据实现了卫星角加速度的预测滤波估计,并通过静电加速度计信息设计卡尔曼滤波器,实现卫星质心的标定;最后进行了数学仿真,仿真结果表明该算法针对卫星的角加速度及质心位置能够实时估计,三轴最佳标定精度分别为[0.0628 0.0324 0.0414]mm,实现了卫星质心较为精确的标定。 相似文献
30.