A Polynomial Prediction Filter Method for Estimating Multisensor Dynamically Varying Biases

The estimation of the sensor measurement biases in a multisensor system is vital for the sensor data fusion. A solution is provided for the estimation of dynamically varying multiple sensor biases without any knowledge of the dynamic bias model pa- rameters. It is shown that the sensor bias pseudomeasurement can be dynamically obtained via a parity vector. This is accom- plished by multiplying the sensor uncalibrated measurement equations by a projection matrix so that the measured variable is eliminated from the equations. Once the state equations of the dynamically varying sensor biases are modeled by a polynomial prediction filter, the dynamically varying multisensor biases can be obtained by Kalman filter. Simulation results validate that the proposed method can estimate the constant biases and dynamic biases of multisensors and outperforms the methods reported in literature.     

Analysis of the code and phase between-receiver inter-system biases of the overlapping frequencies for GPS/Galileo/BDS

The overlapping-frequency signals from different GNSS constellations are interoperable and can be integrated as one constellation in multi-GNSS positioning when inter-system bias (ISB) is properly disposed. The look-up table method for ISB calibration can enhance the model strength, maximize the number of integer-estimable ambiguities, and thus is preferred. However, the characteristics and magnitudes of the receiver code ISB and phase fractional ISB (F-ISB) are not well known and the wrong values of the biases can seriously degrade the positioning results. In this contribution, we first estimate the between-receiver code ISB and phase F-ISB of hundreds of the baselines up to around 25km in the European Permanent GNSS Network (EPN) and the Multi-GNSS Experiment (MGEX) for the overlapping frequencies L1-E1 (L1), L5-E5a (L5) and E5b-B2b (L7). The data collected from 1st January 2016 to 1st January 2019. Second, the receiver-type and firmware-version combinations for the receivers of Trimble, Leica, Javad, Septentrio and NovAtel are carefully classified. Results show that the Septentrio receivers have consistent code and phase ISB values for the three overlapping frequencies i.e. only one value for each frequency and no receivers are different. The Leica, Trimble and Javad receivers have two or more ISB values for at least one of the three frequencies. A few receivers with biases to the groups are also found and listed. Third, the code ISB and phase F-ISB of the groups are adjusted by the least-squares method. The root mean square errors (RMSE) of the least square adjustment are 0.240 m, 0.250 m and 0.200 m for code of L1, L5 and L7 frequencies, respectively, and are 0.0009 m, 0.0015 m and 0.0031 m for phase of L1, L5 and L7 frequencies, respectively. Finally, the effects of code ISB errors on code positing are investigated with the zero-baseline MAT1_MATZ. The distance root mean square error (DRMS) of L1-E1 code positioning can be reduced by 48.2% with 5 GPS and Galileo satellites and the DRMS degrades quickly when the code ISB error is larger.     

小束斑电子束脉冲轰击偏压电源的研制

为了获得一种性价比较高的电子束表面处理技术,采用定频调压电路,研制出一种新型偏压脉冲电源。这种电源由偏压主电路拓扑、偏压变压器和偏压整流滤波电路组成,其中偏压主电路由偏压基值发生电路和偏压脉冲发生电路组成。偏压基值发生电路控制偏压脉冲基值,偏压脉冲发生电路控制偏压脉冲频率和占空比。脉冲偏压电源的脉冲基值、脉冲频率、占空比均连续可调,相应实现脉冲束流的幅值、束流频率和占空比的调节。检测分析了脉冲偏压电源的输出电压波形,带载时的输出束流波形,并观察分析了电子束轰击后钨合金组织变化规律。结果表明所研制的脉冲偏压电源输出电压稳定、可调性好,能满足小束斑脉冲电子束轰击工艺的要求。     

仅地心矢量测量的卫星转对地定向姿态控制方法

摘要： 针对角速度过大且无其陀螺测量的姿态异常情况，开展仅依赖地心矢量的对地姿态快速恢复控制方法研究.基于地心矢量测量信息给出了天平角及天平角矢量定义，提出一种综合天平角抑制与能量耗散的对地姿态恢复控制方法；针对具有星体角动量偏置的闭环控制非线性系统，采用几何方法求解获取各平衡点，并由其特性分析表明通过参数合理选取可使得期望稳定对地姿态为系统唯一稳定平衡点；利用数学仿真方法验证了所提出方法的有效性.     

基于最小熵准则的频偏估计算法研究

提出了一种基于SEM(Spectrum Entropy Minimization,频谱熵最小化)的频偏估计算法。研究发现,频偏越小,离散信号频谱的熵越小。根据这一性质建立了相关算法,通过一维搜索的方式得到使相位补偿后信号频谱熵最小的频偏估计。仿真结果表明:SEM算法的估计性能能够达到CR(Cramer-Rao,克拉美罗)下界,而且估计的稳定性和鲁棒性较好,具有一定的应用价值。     

核磁共振陀螺信号仿真及噪声分析

核磁共振陀螺具有体积小、精度高、功耗低等优势,有望成为下一代惯性导航系统的核心部件,目前正受到人们的广泛关注。比较全面的介绍了核磁共振陀螺的基本理论,在此基础上利用时间离散化方法推导并建立了能够充分考虑核磁共振陀螺系统动态特性的仿真模型。利用该模型研究分析了锁相环相位、磁场、温度以及探测光强在1×10-5均方根幅度下均匀白噪声对陀螺信号的影响,发现它们对角随机游走、零偏不稳定性影响依次减小,且都具有自身独特的频率响应特性。其中,锁相环相位噪声引起的角随机游走与零偏不稳定性分别为5.1985×102(°)/h1/2、3.4593×103(°)/h,而探测光强噪声引起的角随机游走与零偏不稳定性分别为3.1623×10-1(°)/h1/2、4.7603×10-1(°)/h。该研究对深入分析核磁共振陀螺动力学机理、寻找主要噪声来源、提高陀螺性能具有重要意义。     

中国股票市场中的现状偏好现象研究

理性人假设历来饱受诟病,现状偏好现象在成熟资本市场广泛存在.西方行为金融学学者提出了现状偏好理论,而该理论在我国鲜有实证支持.尝试提出了以中国股票市场的正负收益率对换手率的不对称影响来衡量现状偏好现象的理论,选择了我国2011年1月4日至2012年9月28日之间上交所和深交所挂牌的主板A股的数据进行实证分析,发现中国股票市场存在明显的现状偏好现象,并计算出该时期上交所主板A股的现状偏好系数为9.61％,上交所主板A股的现状偏好系数为11.11％.     

精密卫星钟差分形插值算法研究

研究发现精密GPS卫星钟差时序满足三阶平稳假设,由此提出了计算卫星钟差分形维的多阶分形变差法,进而提出了基于分形维确定垂直比例因子的精密卫星钟差分形插值算法。将新方法应用于2010年8个节气日的32颗GPS在轨卫星钟差分形维计算,并选取Block IIA、IIR和IIR\|M各2颗卫星进行钟差插值精度比较。结果表明,分形维可作为定量描述卫星钟差动力学特征的不变量指标;分形插值算法优于三次样条和切比雪夫算法,可以满足快速与高采样率精密卫星钟差应用需求。     

三轴一体光纤陀螺高精度标定方法

针对三轴一体光纤陀螺,定义了标定转换模型,理论上分析了标定过程中各项参数之间相互影响以及地球转速影响导致标定精度较低的问题.针对零偏、标度因数和安装误差角提出一种各项分离测试的高精度标定方法,并将此方法实际应用于某三轴一体高精度光纤陀螺捷联系统,得到了陀螺标定结果.对标定结果进行了误差检验测试以及应用标定结果后进行了系统静、动态测试.测试结果表明:经过标定过程后陀螺精度以及系统测试结果均达到了预期性能要求,验证了标定方法的正确性和实用性.     

多局部节点异步抗差航迹关联算法

为解决航迹异步与系统误差并存情况下的多局部节点航迹关联问题,提出一种基于区间序列离散度的多局部节点异步抗差航迹关联算法。定义区间型数据集的离散信息度量,给出系统误差下航迹序列区间化方法,通过累次积分计算离散度,结合多维分配进行关联判定。针对多局部节点上报目标不完全一致现象,设置零号航迹管理关联质量。与传统算法相比,无需时域配准,可在系统误差下对异步航迹直接关联。仿真结果表明,算法能在局部节点上报目标不完全一致场景下实现有效关联,且正确关联率随局部节点数目的增加或目标密集程度的增大而提高。