高超声速飞行器动态神经网络反推自适应控制

针对高超声速飞行器纵向模型的高度非线性特点,在考虑模型不确定性的情况下,提出了高超声速飞行器动态神经网络调节函数反推自适应控制方法.对给定的速度指令,引入积分型Lyapunov函数设计跟踪控制器,取消了控制增益一阶导数上界的限制,且避免了控制器的奇异性;对给定的高度指令,引入调节函数技术,设计了反推控制器,避免了将模型化为严反馈形式;采用动态神经网络对未知系统动态进行自适应在线逼近.根据Lyapunov理论证明了设计的控制律保证了闭环系统的稳定性与指令跟踪的精确性.仿真结果验证了该方法的可行性及有效性.     

变形飞行器建模及控制方法研究综述

针对变形飞行器的发展现状、气动建模、动力学建模以及控制方法研究进行了综述。首先阐述了变形飞行器的定义及变形需求,再从四个方面梳理了变形飞行器的技术优势。针对不同的机翼变形方式,对飞行器各种变形技术的特点及发展现状进行了详细的分析与总结;将变形飞行器与固定外形飞行器的气动机理进行了对比分析,并对变形飞行器的动力学建模方法进行了梳理,总结了各种方法的特点;结合变形飞行器自身特性分析了飞行控制的特点及难点,并详细阐述了各类变形飞行器的控制研究进展。最后总结分析了变形飞行器的发展趋势：深化基础理论与技术研究,从材料、结构及控制等领域全方面朝着智能化方向发展,最终实现变形飞行器的工程化、自主化、智能化应用。     

一种星-箭连接动态界面力的深度学习反演方法

针对于星-箭连接动态界面力无法通过力传感器直接测量,且典型时域动载反演方法难以准确计算界面力的时域变化等难点,提出了基于长短时记忆(LSTM)神经网络的星-箭界面力深度学习反演方法。首先通过卫星地面测试试验得到数据依据,以卫星主体结构的加速度测量数据为输入层,以星-箭界面力测量数据为输出层,利用LSTM神经网络建立输入和输出间的反演映射关系模型,实现卫星在发射过程中较高精度的界面力反演。进而,设计并开展了某典型卫星结构的正弦扫频和随机振动实验,测试LSTM界面力反演方法的可行性。结果分析可知,所提出的基于LSTM深度学习反演方法能够精确地获得动态界面力时程数据,两项性能指标均优于目前典型的载荷反演方法。     

Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

Envelope protection for aircraft encountering upset condition based on dynamic envelope enlargement

Upset condition encountered by an aircraft in flight could pose great threat to flight safety, which is of chief importance in civil aviation. The causal factors have the nonlinear and multiple characteristics, and as a result the conventional envelope protection system cannot successfully do with the condition. So dynamic envelope based on differential manifold theory, which can take more coupling factors into account, is proposed as a basis to design a novel envelope protection system. Then the relationship between the dynamic envelope and the control coefficient or pilot command is obtained, and the result shows that the dynamic envelope can be enlarged with the change of control coefficient. Furthermore, quantification of flight security is realized via defining relative distance between flight state and dynamic envelope, which can detect whether there is a risk for an aircraft in flight. Finally, an envelope protection system based on dynamic envelope enlargement is proposed on the basis. NASA’s Generic Transport Model encountering hazard gust wind in climbing phase is taken as an example to verify the system’s feasibility. The result shows that the system can give a better operation encountering upset condition and to a certain extent reduce the number of accidents or incidents.     

Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves

Leakage due to wear is one of the main failure modes of aero-hydraulic spool valves. This paper established a practical coupling wear model for aero-hydraulic spool valves based on dynamic system modelling theory. Firstly, the experiment for wear mechanism verification proved that adhesive wear and abrasive wear did coexist during the working process of spool valves. Sec-ondly coupling behavior of each wear mechanism was characterized by analyzing actual time-variation of model parameters during wear evolution process. Meanwhile, Archard model and three-body abrasive wear model were utilized for adhesive wear and abrasive wear, respectively. Furthermore, their coupling wear model was established by calculating the actual wear volume. Finally, from the result of formal test, all the required parameters for our model were obtained. The relative error between model prediction and data of pre-test was also presented to verify the accuracy of model, which demonstrated that our model was useful for providing accurate prediction of spool valve’s wear life.     

肼类动态标准气体发生装置的设计

研制了用于制取肼类标准气体的动态配气装置。该装置通过精密控制的蠕动泵连续不断地注射一定量的肼类液体 ,同时以加热的高纯氮气作为载气 ,在动态中混合均匀后得到一定体积分数的肼类标准气体。结果显示 ,在载气温度、载气流量以及环境温度一定的条件下 ,通过控制进给流量可制备体积分数为 (0 .1～ 10 0 )× 10 -6的肼类标准气体     

针对不同目标时对接机构适应性研究

讨论了对接过程的动力学模型、与不同质量飞行器对接过程的特点，以纵向性能为例，提出了缓冲性能参数与对接初始条件组合设计，使对接机构能够适应不同对接飞行器质量特性的要求。仿真结果表明，该方法是可行的。