三角翼低速动态大攻角气动特性试验研究

对后掠角分别为X=60°、70°和80°尖前缘平板三角翼模型和一个前缘后掠角为（76° 40°）的双三角翼模型在低速风洞中作大攻角俯仰摩波运动，振幅am=30°、60°和90°，缩减频率K=0.01～0.12，基于根弦长雷诺数Re=2.76×10^5～8.23×10^5。进行了六分量动态气动载荷测量，动态流动显示和70°三角翼上翼面非定常压力测量，并分别与对应的静态试验结果比较。分析了运动参数包括缩减频率、振幅和Re数、后掠角对气流动态迟滞特性的影响。     

喷管冷吹风实验的推力架设计

本文介绍了柔性推力架和刚性推力架在喷管风洞实验中的表现.讨论了: 为什么风洞实验中使用柔性推力架达不到推力测量的精度要求?为什么试车台上用柔性推力架又是可行的.通过分析,找到了问题的根源在于风洞实验中用的是气体介质,而试车台上用的介质是液体推进剂.     

低速风洞横向开槽壁试验段性能的研究

为探索减小洞壁干扰的试验方法，用环境风洞做了二维横向开槽壁试验段性能的试验研究。槽壁由等宽度薄板条在相对模型的两侧壁以零攻角等间距排放而构成，通过测量圆柱模型周向的表面压力对槽板宽度、驻室深度、试验段长度，模型在试验段中的轴向位置等与槽壁试验段性能有关的参量做了试验研究。模型堵塞比一直到０．２５的试验结果与无干扰的参考曲线符合良好，结果表明低速横向开槽壁具有洞壁干扰小且结构简单的特点。     

风洞模拟近地面大气边界层

本文通过大气边界层风洞的模拟实验，介绍一种在风洞中模拟近地面大气边界层的方法。根据大风地区的现场实测资料，对大气的风剖面及湍流度等有关参数，提出了一些特殊的要求。常规的模拟方法难以保证与实际风环境的相似，为此专门研制了一种在保证平均风剖面相似的前提下，可使气流产生大湍流度的装置，简称湍流度调节器。通过对模拟边界层的平均风速，湍流度及风速谱的测量分析，证明与实际风区大风环境的风结构相当一致。为解决实     

Modelling of the electromagnetic field in the interplanetary space and in the Earth's magnetosphere

A magnetohydrodynamic model of the solar wind flow is constructed using a kinematic approach. It is shown that a phenomenological conductivity of the solar wind plasma plays a key role in the forming of the interplanetary magnetic field (IMF) component normal to the ecliptic plane. This component is mostly important for the magnetospheric dynamics which is controlled by the solar wind electric field. A simple analytical solution for the problem of the solar wind flow past the magnetosphere is presented. In this approach the magnetopause and the Earth's bow shock are approximated by the paraboloids of revolution. Superposition of the effects of the bulk solar wind plasma motion and the magnetic field diffusion results in an incomplete screening of the IMF by the magnetopause. It is shown that the normal to the magnetopause component of the solar wind magnetic field and the tangential component of the electric field penetrated into the magnetosphere are determined by the quarter square of the magnetic Reynolds number. In final, a dynamic model of the magnetospheric magnetic field is constructed. This model can describe the magnetosphere in the course of the severe magnetic storm. The conditions under which the magnetospheric magnetic flux structure is unstable and can drive the magnetospheric substorm are discussed. The model calculations are compared with the observational data for September 24–26, 1998 magnetic storm (Dst _min=−205 nT) and substorm occurred at 02:30 UT on January 10, 1997. This revised version was published online in August 2006 with corrections to the Cover Date.     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

钻孔法测量残余应力时释放系数的标定与计算

 <正> 用钻孔法测量残余应力时,使用的释放系数将对构件的残余应力测量精变产生影响。计算释放系数的理论方法有多种。其中普遍应用的公式,是由弹性力学通孔公式推导的应变片中心点处计算式。     

壁压法在低速闭口回流式风洞中的应用

本文介绍了由Hackett提出的一种估算大攻角洞壁干扰修正的壁压信息法。并利用四个几何相似、尺寸不同的平板机翼和翼-身组合体模型在南航NH-2风洞中进行了试验。试验和计算结果表明,该方法使用方便,修正结果准确可靠。但必须指出,对于试验段下游带有平衡缝的闭口回流风洞,洞壁测压数据需经适当的修正才能获得满意的结果。     

风洞地板边界层厚度控制新方法

本文介绍了一种风洞固定地板边界层厚度控制新方法。风洞试验结果比较表明,这种方法不但能显著降低地板边界层厚度,而且边界层控制装置对风洞气流干扰较小,流场较均匀,气流品质较好。与国内外现有的风洞地板边界层厚度控制方法相比,这种方法颇具特色。     

频率计“时间间隔”参数自动校准的方法研究

主要介绍了利用新研制的通用仪器综合校准系统 ,在实现频率计类仪器“时间间隔”参数自动校准时 ,对相关仪器连接、校准方法以及软件设计等问题 ,提出了一种间接测量单线时间间隔的方法。