Gust response analysis and wind tunnel test for a high-aspect ratio wing

A theoretical nonlinear aeroelastic response analysis for a flexible high-aspect ratio wing excited by harmonic gust load is presented along with a companion wind tunnel test. A multidisci-plinary coupled numerical calculation is developed to simulate the flexible model wing undergoing gust load in the time domain via discrete nonlinear finite element structural dynamic analysis and nonplanar unsteady vortex lattice aerodynamic computation. A dynamic perturbation analysis about a nonlinear static equilibrium is also used to determine the small perturbation flutter bound-ary. A novel noncontact 3-D camera measurement analysis system is firstly used in the wind tunnel test to obtain the spatial large deformation and responses. The responses of the flexible wing under different static equilibrium states and frequency gust loads are discussed. The fair to good quanti-tative agreements between the theoretical and experimental results demonstrate that the presented analysis method is an acceptable way to predict the geometrically nonlinear gust response for flex-ible wings.     

电子对抗有效载荷地面测试与评估技术

描述电子对抗有效载荷地面测试系统的设计内容,介绍了测试系统的主要组成、功能及测试工作原理,常有的测试项目、测试方法,载荷的数据整理、评估与分析等,为以后电子对抗载荷地面系统搭建提供参考借鉴作用。     

Aerothermodynamic and stability analyses of a deployable re-entry capsule

Recent research projects, in the field of atmospheric re-entry technology, are focused on the design of deployable, umbrella-like Thermal Protection Systems (TPSs). These TPSs are made of flexible high temperature resistant fabrics, folded at launch and deployed in space for de-orbit and re-entry operations. In the present paper two possible sphere–cone configurations for the TPS have been investigated from an aerodynamic point of view. The analyzed configurations are characterized by the same reentry mass and maximum diameter, but have different half-cone angles (45° and 60°). The analyses involve both the evaluation of thermal and aerodynamic loads and the assessment of the capsule longitudinal stability. The aerothermodynamic analysis has been performed for the completely deployed heat shield in transitional and continuum regimes, while the longitudinal stability has been analyzed in free molecular, transitional and continuum regimes, also taking into consideration the heat shield deployment sequence at high altitudes.     

翼型尾缘低频大功率合成射流的动态载荷特性研究——B：动态气动载荷特性分析

针对NACA0015翼型,设计了适用于风洞研究的尾缘低频大功率合成射流致动器,对翼型尾缘合成射流作用下的非定常气动特性进行了风洞实验研究。研究表明：尾缘合成射流与横流的相互作用能够有效改变作用在翼型上的气动载荷;单侧喷口喷/吸时,喷冲程气动力系数响应幅值约为吸冲程幅值的3倍;双侧喷口同时工作时,升力和力矩系数的幅值并不是单侧喷口单独工作时喷气幅值的简单叠加,而是处于单侧喷气幅值和喷吸幅值和之间;升力和力矩响应的幅值与喷流动量系数的平方根之间存在近似的线性关系;在动量系数不变时,升力和力矩系数响应的幅值会随减缩频率的增加而减小;给定合成射流器行程,升力和力矩响应幅值与合成射流频率之间近似呈线性关系。     

MSC.ADAMS虚拟仿真在应急门打开机构中的应用

机构的运动是一个伴随诸多因素的复杂过程,采用常规的解析法无法获得较为准确的求解。为了更加真实地分析机构的运转,在某型号应急门打开机构的研发中引入了MSC.ADAMS多体动力学分析平台。首先基于MSC.ADAMS软件虚拟仿真了应急舱门的打开机构,根据适航条例的要求,确定了打开机构驱动系统性能参数;然后通过在虚拟样机上施加机构随机载荷获得机构件的强度优化载荷输入,依据该载荷为打开机构进行强度优化,为飞机研制提供了一套行之有效的方法。     

基于GA-ELM的飞行载荷参数识别

针对用复杂飞行数据识别飞行载荷时的精度低、速度慢等问题,提出一种结合遗传算法(GA)和极限学习机(ELM)的GA-ELM模型。该模型使用ELM神经网络作为计算核心,用遗传算法产生ELM网络输入层到隐含层的权值矩阵和隐含层偏移量;用GA-ELM模型对飞行数据进行识别,并与BP神经网络和原始ELM神经网络的识别结果进行对比。结果表明:GA-ELM模型是一种有效且高精度的飞行载荷参数识别方法。     

基于重复控制的三相四桥臂逆变器控制技术

三相四桥臂逆变器可以带不平衡负载甚至单相负载。针对三相四桥臂逆变 器,提出了一种新的重复控制算法。该算法相对于传统恒压恒频（CVCF） 控制算法具 有设计简单, 不需要dq 变换, 在提高电压稳态精度的同时, 还降低了输出电压总谐波 含量（THD）。系统分析了三相四桥臂逆变器电路模型,得到整个系统的传递函数,分 析了系统的稳态误差和稳定性。最后通过仿真和试验验证了系统输出电压稳态精度高, 谐波含量低,且能有效抑制由不平衡负载引起的输出电压不平衡。     

基于非线性气动力的飞机飞行载荷计算

为了研究气动力非线性对飞机静气动弹性特性及飞行载荷的影响,发展了一种基于非线性气动力的飞机静气弹及飞行载荷计算方法。通过引入CFD计算结果,实现对线性方法中的气动力影响系数矩阵的非线性修正,采用模态法求解静气弹配平方程得到飞机非线性的气弹变形及飞行载荷。以某翼身组合体构型为计算算例,分别针对刚性模型和柔性模型,基于非线性气动力完成了飞机静气动弹性分析及载荷计算,并与线性结果进行了对比分析。结果表明,非线性方法可对大迎角范围内飞机静气弹变形及飞行载荷做出较合理的预测。     

EXPERIMENT RESEARCH ON DYNAMIC LOAD IDENTIFICATION TECHNOLOGY BASED ON GENERALIZED ORTHOGONAL POLYNOMIAL THEORY (GOPT)

Dynamicloadisoneoftheimportantoriginalparametersinstructuraldynamicanalysis.Ithasobviousinfluencestodynamicsdesign,vibrationcontrols,activecontroltechnologyandsoon.Sincel97O,manyresearchitemsinthisfieldhavebeenaccomplishedintheworld-Sometheoriesandexperimentalmethodsofdynamicloadidentificationhadbeencreatedinfrequencydomain[l'2J-Howeverftherearesomedisadvantagesthattheycouldbeadaptedonlytoidenti-fythesteady-stateloadandnottoidentifythetransientload,suchasshockloadwithshortsampling.Forvarious…     

考虑几何非线性的气动弹性模型缩比方法

随着飞机性能和需求的提高,大展弦比高柔性机翼逐渐成为新型飞机的主要结构形式。这类机翼具有高升阻比、大变形和重量轻等特性,几何非线性效应明显。然而机翼的大展弦比高柔性会带来更大的机翼变形,而机翼大变形则会引起相关的非线性气动弹性行为。为了评估这些非线性气动弹性行为并同时降低设计风险和成本,一般要使用缩比模型进行风洞试验以研究和确认真实飞机的气动弹性特性。基于此,首先使用了传统线性缩比方法来进行缩比,通过刚度质量耦合匹配模态响应法与刚度质量解耦匹配模态响应法这2种线性缩比方法,不断优化缩比结构的设计参数来满足目标缩比值。同时,提出一种动力学有限元模型的非线性静响应-模态协同优化方法,该方法是基于等效静态载荷法的几何非线性气动弹性模型缩比方法,通过2个不同的优化子程序分别匹配全尺寸飞机的非线性静响应和模态振型。结果表明,相比于传统线性缩比模型,考虑几何非线性的缩比模型能够更好地再现全尺寸飞机的非线性气动弹性行为。