航空发动机性能恢复控制方法

针对航空发动机部件蜕化导致性能变差问题,设计了航空发动机性能恢复控制系统,系统根据发动机的工作状态以及健康状态在常规转速控制模式、稳态性能恢复控制模式和加速性能恢复控制模式之间切换.稳态性能恢复控制模式在常规转速控制模式的基础上设计了一个外环控制回路,通过自适应修正稳定状态下压气机转速指令达到蜕化发动机性能恢复的目的;加速性能恢复控制模式通过综合常规转速控制方法和喘振裕度控制方法,在保证发动机气动稳定的同时,充分挖掘发动机潜力,从而达到恢复蜕化发动机加速性能的目的.通过不同状态不同部件蜕化下的仿真结果表明恢复蜕化发动机性能的有效性.      

空间相机电子设备热设计

电子设备是空间相机重要发热源,需要通过合理的热设计将热量及时导走,维持电子元器件温度不致过高。根据空间相机各电子设备所处空间环境、结构特点及内部电子元器件热特性,提出了相应的多种不同的热设计方法,采用热仿真分析、热平衡试验两种方法对设计进行了验证,对比了两种方法所获取的温度数据。结果表明两种方法所获取元器件结温均满足温度降额指标要求,且相差不大,充分验证了热设计方案的有效性和仿真分析的准确性。     

An error analysis and optimization method for combined measurement with binocular vision

The accurate measurement of surfaces of large aviation components is vital for the assessment of manufacturing and assembly quality of such components. To satisfy the measurement requirement of large-size components, most current researches pay more attention to combined measurement methods utilizing different measuring instruments, but the related researches on error analysis and optimization methods are not taken enough attention. This paper proposes a combined laser-assisted measurement method with feature enhancement techniques, and it also develops an error propagation model of the main factors affecting the overall measurement error in detail. Firstly, the surface of a large-size component is measured by the measurement system at multiple stations. Secondly, a control point coordinate system is established as a bridge to unify all local measurement data into the global coordinate system. To improve the overall measurement accuracy, the pixel extraction error as a key factor causing the overall measurement error is analyzed in detail. Next, the error propagation model is established, and some optimization strategies of layout for minimizing measurement error and transformation error are researched. Finally, experiments are carried out to verify the effectiveness of the proposed method. The results show that the measurement error of the proposed method reaches 0.073% and 0.14% with a 1D standard ruler and a flat plate, respectively.     

Zr-Al-(Ni-Cu)合金的非晶形成能力及热学性能

采用喷射铜模铸造法研究了Ni和Cu含量对Zr-Al-(Ni-Cu)四元合金的非晶形成能力的影响.利用X射线衍射仪分析了铸态合金的相结构,利用差示扫描量热仪研究了非晶合金的热学性能.结果表明:Zr-Al-(Ni-Cu)四元合金的非晶形成能力远大于Zr-Al-Ni和Zr-Al-Cu三元合金的非晶形成能力.Zr65Al7.5Ni10Cu17.5合金显示最高的非晶形成能力,其非晶形成临界直径可以达到7 mm.相似元素Ni和Cu在一定比例下共存,使液态合金的熵值增加,自由能降低,从而有效提高了合金的非晶形成能力.     

振动监测与故障诊断技术在“风云二号” 扫描辐射计中的应用

转动部件的状态监测和故障诊断有多种方法,其中振动诊断技术在被诊断系统的信号采集、数据处理、故障识别和诊断中显示出简便可靠的优越性,尤其适用于不停机在线监测和诊断报警。“风云二号”扫描辐射计由于其特征频率为较高的67 Hz与200 Hz,尤其适用于通过测量加速度来监测状态和诊断故障。振动诊断技术将为确保卫星的长寿命和高可靠提供有力保障。     

基于函数型数据的广义线性回归模型

函数型数据的回归分析研究主要集中在函数型线性模型。不要求因变量为连续型随机变量,可以为离散型或属性数据(对应于泊松或Logistic回归),对同时含有数值型多元变量和函数型变量的广义线性模型的估计问题进行分析,采用非参数方法得到了参数部分和非参数部分的估计量,并给出了一种重加权算法进行参数求解,解决了含数值型和函数型混合数据类型自变量的回归问题,同时扩展了函数型线性模型的应用范围。估计过程中,分别采用了函数型主成分和B样条基函数,并给出了基函数个数选择的准则。数值模拟结果表明,所提出方法具有良好的可行性与正确性。      

Structural Nonlinear Flutter Characteristics Analysis for an Actuator-fin System with Dynamic Stiffness

The flutter characteristics of an actuator-fin system are investigated with structural nonlinearity and dynamic stiffness of the electric motor. The component mode substitution method is used to establish the nonlinear governing equations in time domain and frequency domain based on the fundamental dynamic equations of the electric motor and decelerator. The existing describing function method and a proposed iterative method are used to obtain the flutter characteristics containing preload freeplay nonlinea...     

气相色谱法检测无水肼中水含量的不确定度评定

对气相色谱法检测无水肼中水含量过程的不确定度进行评定,系统分析检测过程中不确定度来源和各不确定度分量对分析结果的影响,通过对不确定度的分量进行分析和合成,可知标准溶液配制的过程、标准曲线的拟合和测量样品时的重复操作带来的不确定度分量是影响无水肼中水含量测定不确定度的主要来源.     

Recent Developments on Damage and Fracture of Thin-Walled Complex Components Produced by Spinning

The spinning technique has been widely used in the manufacture of aerospace thin-walled axisymmetric components because of its excellent formability. Damage and fracture, as the important defects that often occur and must be avoided in the forming and service stages of components, have attracted much attention of researchers. In this paper, the fracture behavior and laws of spinning components such as conical parts, tubular parts, and components with inner ribs are summarized, the typical coupled and uncoupled ductile fracture models are introduced, and their applications in spinning are analyzed. Meanwhile, the recent developments on the modified ductile fracture model in analyzing damage and fracture mechanisms of spinning are emphatically introduced. The results could provide guidance for the selection and establishment of appropriate ductile fracture models in the finite element simulation for the accurate prediction and analysis of fracture moment, location, form, damage mechanism, and evolution law, and help the development of precision spinning techniques for high-performance thin-walled complex components.     

应用非均匀B样条拟合涡轮发动机部件特性

为了使气动热力模型更好的逼近涡轮发动机,应用成熟的非均匀B样条来拟合部件特性.这种方法既可以保证发动机计算的整体性能也大大提高了其局部特性的准确性.单轴涡喷发动机的算例证明了方法的有效性.