电涡流激振圆管的试验研究

ＪＤＺ－３型电涡流激振是研究外覆纤维合材料薄壁金属圆管振动特性的激振源，本文阐述了电涡流激振的工作原理，性能特征及其在研制过程中所进行的各种试验，如涡流感应头结构型，恒磁路系统，激振器与试件之间的间隙，交流激磁强度和感应头激磁线圈的设计等。还介绍了激振器与功效的阻抗匹配，最后，用该设备对六种不同圆管进行激振试验，取得了良好的结果。     

立柱前壁旋涡

本文论述的是最近在烟流显示实验中发现的尚未见诸于文献的新现象:在平板上垂直放置的方柱和凹面柱体迎风面的中部和上部存在较大的旋涡或涡对,这些涡在前壁流动区域生成,然后绕过立柱两侧,伸向下游,整个涡带形成马蹄形。其中对方柱等具有平直迎风面的立柱,主要是生成若干个单涡;而对具有凹型迎风面的 Y,V,U 截面立柱,则形成若干个涡对。涡对在前壁区域重复着生成,增长,猝裂的过程,具有较稳定的周期,其 Strouhal 数与下游卡门涡街的 Strouhal 数接近,而单涡则基本上是前壁驻涡。实验还表明,二维长柱体也存在这类现象。这些特性将对结构物产生新的静态和动态气动力问题。     

小型二冲程汽油机缸体气口尺寸的确定及其对整机性能的影响

本文以一种典型小型二冲程汽油机为例，介绍了缸体气口尺寸的确定方法，并通过发动机台架试验的结果分析气口尺寸、形状、气道质量对整机性能的重要影响。为进一步提高产品质量，提供了可靠的依据。     

发动机缸套的磨损及其预防措施

在对发动机缸套磨损特点及其影响因素进行理论分析的基础上，根据多年的实践经验，本文提出了降低发动机缸套磨损从而提高发动机使用寿命的有效措施。     

高超声速绕平板上直立圆柱流动特性研究

以平板上直立平无限谪圆柱体为研究对象，采用和Ｒｏｅ三阶通量差分分裂格式求解雷诺平均Ｎ－Ｓ方程，数值模拟研究了高超声速且壁面有传热条件下三维流流场的激波边界层干扰特性，物面压力分布计算值与值吻合良好，数值模拟结果可见圆柱上游分离区流场是一个马蹄形五涡结构且存在有二次分离激波，这是一种值得深入研究的流动新现象。     

特征无反射边界条件应用于二维圆柱绕流模拟

采用特征无反射边界条件和吸收层技术相结合的边界处理方法,研究了二维圆柱绕流模拟的边界反射问题。近年来在计算气动声学中提出了将大涡模拟和声学传播方程结合的混合方法求解声场,基于计算量的考虑,须在较小的计算区域内进行大涡模拟,这就需要在计算区域较小时,边界的反射尽可能小。作为大涡模拟研究的技术储备,将该方法应用于二维圆柱绕流的模拟中。数值结果表明这种方法在计算区域较小时,能起到很好的无反射效果,计算结果与前人在计算区域取得很大时的结果比较吻合。     

时变因素作用下薄壁筒工件车削振动特性与实验

针对薄壁筒类工件的切削颤振问题,采用理论建模、数值仿真和实验测试相结合的方法,研究切削过程中时变工件厚度和切削位置对薄壁筒振动特性的影响规律.利用有限元法建立主轴-卡盘-工件工艺系统模型,分析不同壁厚、切削力位置对薄壁筒切削系统的固有模态、频率响应函数的影响.结合模态实验与切削振动实验表明:薄壁筒周向壳体模态对于壁厚的...     

Dynamic Response Analysis of Bird Strike on Aircraft Windshield Based on Damage-modified Nonlinear Viscoelastic Constitutive Relation

Damage-modified nonlinear viscoelastic constitutive equation and failure criterion are introduced and the three-dimensional incremental forms are deduced based on the updated Lagrangian approach. A simple tensile test model and a split Hopkinson pressure bar model are built to verify the accuracy of the subroutine implemented within the non-linear finite element program LS-DYNA. A numerical model of bird strike on windshield is established to study the responses of windshield under three different bird velocities at three sites. The bird is represented by a cylinder with a hemisphere at each end and the contact-impact coupling algorithm is used in this study. It is found that the implemented subroutine can properly describe the mechanical behavior of polymethyl methacrylate under low and high strain rates and large deformation, and can be used validly.     

Design and numerical investigation of swirl recovery vanes for the Fokker 29 propeller

Swirl recovery vanes（SRVs） are a set of stationary vanes located downstream from a propeller, which may recover some of the residual swirl from the propeller, hoping for an improvement in both thrust and efficiency. The SRV concept design for a scaled version representing the Fokker 29 propeller is performed in this paper, which may give rise to a promotion in propulsive performance of this traditional propeller. Firstly the numerical strategy is validated from two aspects of global quantities and the local flow field of the propeller compared with experimental data, and then the exit flow together with the development of propeller wake is analyzed in detail.Three kinds of SRV are designed with multiple circular airfoils. The numerical results show that the swirl behind the propeller is recovered significantly with Model V3, which is characterized by the highest solidity along spanwise, for various working conditions, and the combination of rotor and vane produced 5.76% extra thrust at the design point. However, a lower efficiency is observed asking for a better vane design and the choice of a working point. The vane position is studied which shows that there is an optimum range for higher thrust and efficiency.     

基于引文索引的航空发动机咨询通告分析方法

引入了引文索引方法对整部航空规章中所有咨询通告进行整体上的分析,提出了一种基于引文索引的航空发动机咨询通告分析方法.首先,确定某部航空规章的咨询通告为研究对象,根据咨询通告间的相互引用关系画出引文网络图;然后,在引文网络图的基础上结合评价指标的定性分析和定量分析对咨询通告进行全面的研究分析;最后,应用此方法对美国某部航空规章的咨询通告进行实例分析,同时也说明了基于引文索引的航空发动机咨询通告分析方法的可行性.