Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

表面介质阻挡放电等离子体体积力实验

采用粒子图像测速(PIV)技术,在2200,4800,7300,14600Pa空气压力条件下,测量了高频高压表面介质阻挡放电(surface dielectric barrier discharge,SDBD)等离子体诱导流场.根据速度场和N-S方程求解了等离子体体积力分布,分析了空气压力和激励器电压对等离子体体积力影响.实验结果表明:相同空气压力时,激励器电压越高体积力越大.相同激励器电压时,体积力随空气压力升高减小.在体积力分布区域,体积力方向一致,较大体积力区域分布于体积力方向线上游,流场高速流动区域紧挨较大体积力分布区域,位于体积力方向线下游.     

脉冲雷达凝视模式下低轨碎片相对运动特征分析

脉冲雷达凝视模式是一种探测低轨小碎片的重要方式,其中低轨碎片与雷达的径向运动关系是碎片统计分析的基础.为推算碎片相对雷达的运动特征,基于坐标系的相互转换,先利用雷达测站信息,得到可见碎片在地惯坐标系下的轨道信息;再逆向将目标不同时刻的位置转换至测站坐标系下,得到目标的径向运动特征.在不同要素（雷达波束指向、雷达仰角、测站纬度、目标距离）下,仿真及对比分析了各个参数对速度模糊度、雷达可见性等的影响,得出在凝视模式下目标相对雷达近似做径向匀加速运动,这为后续试验工作提供有力的依据.     

波束波导馈电系统在深空探测天线应用中的关键技术研究

针对波束波导馈电系统在深空探测天线应用中存在的电小尺寸镜面绕射引起波束波导传输效率降低,不同极化工作时波束指向不一致,以及TE21模跟踪时坐标转换等问题,进行深入研究并给出相应的解决方案或数学模型.通过优化椭球镜M5的曲率,解决了电小尺寸镜面绕射使波束波导传输效率下降问题,使S频段的传输效率提高约4％,35 m天线副反射面的截获效率增加约11％,天线增益提高0.7 dB;给出天线束峰值位置随方位、俯仰角变化的数学模型,提出了中值补偿方法,使天线左右旋极化峰值不一致增益损失减小约0.16 dB,并给出TE21模跟踪时的坐标转换数学模型.这些方法和数学模型已成功应用于实际工程中,并取得了良好的效果.     

人体热调节的有限元分析

本文根据人体的热调节机制建立了二维人体热调节的有限元模型，并设计了相应的实验对该模型进行了验证，实验结果与计算结果吻合较好，本模型对于以人体－环境热交换为内容的工程实践和理论研究有较高的应用价值。     

某型飞机机身合拢总装型架设计新技术

某型飞机机身合拢总装型架，在设计上采用了先进制造技术。型架上装有目前国际先进的光学坐标系统，型架地基采用整体框架式底盘。型架结构为分散式。按飞机飞行状态在型架中摆放，并由上方起吊形式下架。本文简要介绍了该型架的设计、制造情况及效果。     

我校大学生心理健康状况不容乐观

本文用SCL－90症状自评量表方法，对我校三个年级的部分班级进行了测查。分析表明：我院大学生的心理健康状况不容乐观。本文还对学生管理现状提出了进一步改进建议。     

超声速平面钝体流动的快速解法

本文介绍了一种平面流动的快速欧拉方程解法。该方法将原参数非定常欧拉方程组重新组合成以广义称曼变量表示的欧拉方程组，再用二点二步迎风格式离散解。针对钝体流动，本文先建立了动网格下的方程，构造了动网格下的算法。提出了一种简单的激波处理方法。计算结果表明，该方法速度快，稳定性好，对初场不敏感。     

小型弹体转动惯量的测定

阐述了对称式三线摆的结构原理及该摆微角与大角摆动周期的计算方法 ,利用此摆可以测量构件的转动惯量。当 RL <130 、φ0 <6 0°时 ,该装置的测量准确度优于 1%。