TC4钛合金材料采用金刚石砂轮磨削时的工艺参数优化

钛合金材料在航空器和发动机中的应用极为广泛,涡扇发动机中低压压气机静子叶片基本由钛合金材料制成,由于钛合金的磨削性能较差,对选用金刚石砂轮进行钛合金材料磨削时的主要工艺影响因素（如进给速度、磨抛深度等）进行了试验分析,优选出更适用于金刚石砂轮磨削钛合金的工艺参数,该参数不仅能够用于自研的双面仿形抛修设备,还可以对其他型号磨床磨削钛合金材料时的工艺参数选择提供指导。     

A Class of TVD Type Combined Numerical Scheme for MHD Equations With a Survey About Numerical Methods in Solar Wind Simulations

It has been believed that three-dimensional, numerical, magnetohydrodynamic (MHD) modelling must play a crucial role in a seamless forecasting system. This system refers to space weather originating on the sun; propagation of disturbances through the solar wind and interplanetary magnetic field (IMF), and thence, transmission into the magnetosphere, ionosphere, and thermosphere. This role comes as no surprise to numerical modelers that participate in the numerical modelling of atmospheric environments as well as the meteorological conditions at Earth. Space scientists have paid great attention to operational numerical space weather prediction models. To this purpose practical progress has been made in the past years. Here first is reviewed the progress of the numerical methods in solar wind modelling. Then, based on our discussion, a new numerical scheme of total variation diminishing (TVD) type for magnetohydrodynamic equations in spherical coordinates is proposed by taking into account convergence, stability and resolution. This new MHD model is established by solving the fluid equations of MHD system with a modified Lax-Friedrichs scheme and the magnetic induction equations with MacCormack II scheme for the purpose of developing a combined scheme of quick convergence as well as of TVD property. To verify the validation of the scheme, the propagation of one-dimensional MHD fast and slow shock problem is discussed with the numerical results conforming to the existing results obtained by the piece-wise parabolic method (PPM). Finally, some conclusions are made. This revised version was published online in August 2006 with corrections to the Cover Date.     

机型成本预测的因素分析法

根据管理会计把机型成本要素分解为固定成本、半变动成本和变动成本，对航空公司机型的航空运量作出预测，就可对机型作出预测。     

旋流器型式对空气雾化喷嘴雾化特性影响规律

采用试验与数值计算相结合方法研究了不同旋流器型式对双旋流式空气雾化喷嘴喷雾特性的影响规律.采用粒子图像测速(PIV)测量了不同空气雾化喷嘴下游流场结构,并且采用高速摄影仪和激光粒度分析仪,对不同空气流量和燃油流量下的双级旋流空气雾化喷嘴的油雾场形态、索太尔平均直径(SMD)、Rosin-Rammler分布进行试验研究;...     

点阵单元类型和排布角度对传热特性的影响

基于瞬态液晶测试技术和数值仿真,在相同孔隙率条件下,研究了桁架型点阵结构的单元类型和排布角度对矩形通道壁面对流传热特性的影响.结果表明:点阵单元类型对壁面传热性能有决定性的影响,其中交叉排布的体心立方(body centered cubic-0,BCC-0)和Kagome-0点阵归因于出色的传热强化效果,雷诺数在5 7...     

Investigating the Coronal Mass Ejections associated with DH type-II radio bursts and solar flares during the ascending phase of the solar cycle 24

We studied a set of 74 CMEs, with shedding the light on the halo-CMEs (HCMEs), that are associated with decametric – hectometric (DH) type-II radio bursts (1–16?MHz) and solar flares during the period 2008–2014. The events were classified into 3 groups (disk, intermediate, and limb events) based on their longitudinal distribution.We found that the events are mostly distributed around 15.32° and 15.97° at the northern and southern solar hemispheres, respectively. We found that there is a clear dependence between the longitude and the CME’s width, speed, acceleration, mass, and kinetic energy. For the CMEs’ widths, most of the events were HCMEs (～62%), while the partial HCMEs comprised ～35% and the rest of events were CMEs with widths less than 120°. For the CMEs’ speeds, masses, and kinetic energies, the mean values showed a direct proportionality with the longitude, in which the limb events had the highest speeds, the largest masses, and the highest kinetic energies. The mean peak flux of the solar flares for different longitudes was comparable, but the disk flares were more energetic. The intermediate flares were considered as gradual flares since they tended to last longer, while the limb flares were considered as impulsive flares since they tended to last shorter.A weak correlation (R?=?0.32) between the kinetic energy of the CMEs and the duration of the associated flares has been noticed, while there was a good correlation (R?=?0.76) between the kinetic energy of the CMEs and the peak flux of the associated flares. We found a fair correlation (R?=?0.58) between the kinetic energy of the CMEs and the duration of the associated DH type-II radio bursts.     

基于Mecanum轮配送车的视觉与磁带双重导引技术研究

针对卫星总装过程中提出的物料配送需求,设计并实现了以Mecanum轮全方位移动平台为基础,可在狭窄配送通道内快速、灵活移动的智能物料配送车。结合总装现场实际环境条件,配送车采用了视觉导引与磁带导引相结合的智能导引策略,有效消除了光照强度变化、地面裂纹、电磁信号干扰等环境因素对车道线采集的影响,最终实现总装物料从库房至多工位的自动配送。     

激光动态液位测量技术研究

如今,运载火箭大量使用液氧、煤油等液体推进剂,其液位测量技术主要有浮子式、激光式、电容式、雷达式等。介绍并实现了一种激光液位测量系统,该系统体积小、功耗低,可适应多种测量环境,能满足航天燃料液位测量高精度、高动态、连续稳定测量的要求。系统利用相位式激光测距技术,通过测量激光回波信号的相位延迟,计算激光光程从而得到距离数据并通过客户端进行直观展示和数据存储。系统最大测量距离可达100 m,精度为±1 mm。该系统为非接触测量,耐腐蚀,通过加入反射板可实现透明、非透明液体测量。     

滚珠自转对高速球轴承环下润滑内部流动的影响

高速球轴承正常工作时,处于高速旋转状态,此时油相和气相因重力和离心力的作用在轴承环间剧烈运动。为了更准确地分析轴承环间的两相流动,采取VOF模型进行内部流场的模拟,采用多重旋转坐标系描述部件运动。建立球轴承环下润滑计算模型,分析了考虑滚珠自转因素下轴承内部的流动,并在此基础上探究了转速及供油量对轴承工作状态的影响。结果表明,对比整体模型与滚珠自转模型,发现滚珠自转使得轴承内部油体积分数增大,同时也使得滑油穿透间隙达到外环的能力增加;在考虑滚珠自转情况下,转速的不断增大,使得轴承内部的油相体积分数不断减小,在低转速情况下滚珠自转对流体运动影响较为明显,在高转速情况下公转速度对流体运动起到主导作用,滚珠自转对流体运动影响减弱;供油量不断的增大,使得滚珠自转模型内部的油相体积分数也在不断增大,而且滚珠自转运动会加强滑油在轴承内部的分布。     

钛合金TC4的超硬磨料柔性抛光轮数控抛光试验研究

航空发动机叶片钛合金材料在数控磨抛加工中容易发生烧伤及黏附现象,针对常用的TC4材料开展了超硬磨料柔性抛光轮数控抛光试验研究。分析了超硬磨料柔性抛光轮抛光参数中转速、进给速度、预压量及行距对抛光去除深度及抛光后试件表面粗糙度的影响规律并通过正交试验分析了各抛光参数影响的主次关系。确认了钛合金试件抛光表面黏附物质成分,并同时分析了表面黏附物的形成原理。给出了TC4钛合金材料在超硬磨料柔性抛光轮数控抛光过程中工艺参数的选择策略,为TC4材料的航空发动机叶片和整体叶盘在超硬磨料柔性抛光轮数控抛光过程中提供理论依据和技术基础。