CNC装置中软件精插补器的研究

在分析了当今广泛用于CNC装置的软、硬件两级插补控制机理的基础上,对用软件实现精插补控制的可行性进行了分析,并进行了试验验证.     

Electric discharge in the Martian atmosphere,Paschen curves and implications for future missions

Electric discharge between two electrically charged surfaces occurs at a well-defined, gas-dependent combination of atmospheric pressure and the distance between those two surfaces, as described by Paschen’s law. The understanding of when the discharge will occur in the conditions present on Mars is essential for designing space-flight hardware that will operate on the Martian surface as well as understanding electrical discharge processes occurring in the Martian atmosphere. Here, we present experimentally measured Paschen curves for a gas mixture representative of the Martian atmosphere and compare our results to breakdown voltages of carbon dioxide, nitrogen, and helium as measured with our system and from the literature. We will discuss possible implications for instrument development as well as implications for processes in the Martian atmosphere. The DC voltage at which electric discharge occurred between two stainless steel spheres was measured at pressures from 10⁻² to 100 torr in all gases. We measured a minimum voltage for discharge in the Mars ambient atmosphere of 410 ± 10 V at 0.3 torr cm. As an application, the breakdown properties of space-qualified, electrical wires to be used in the Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) were studied.     

对ISAR成像中扫频非线性的曲线拟合

线性调频法是逆合成孔径雷达(ISAR)成像中一种常用的方法,在该方法中扫频非线性对成像质量有一定的影响.特别是在频率较高、扫频带宽很宽及扫频时间较短时,扫频的非线性曲线很难描述出来．从基本的ISAR成像知识出发,运用简单的数学方法,首次对用任意次曲线来模拟扫频非线性曲线的方法进行了研究.最后,通过实验验证了这种方法的正确性.      

带限位台阶的高阻尼橡胶减振器性能试验分析

航天工程中的有害振动可通过高阻尼橡胶减振器进行控制,但核心耗能单元和其他部件之间的连接容易失效。为了改进高阻尼橡胶减振器中阻尼材料和钢板的连接模式,使两者在较大变形下具有较高的机械连接性能,并且避免采用高温高压整体硫化的生产工艺,提出了一种带限位台阶的装配式高阻尼橡胶减振器。该减振器的阻尼材料和钢板之间采用常温胶黏连接模式,且在阻尼材料和钢板的连接边界面上设置了若干个具有一定高度的阶梯状限位台阶。对限位阶梯总高度分别为3 mm、4 mm、5 mm的3种不同装配式高阻尼橡胶减振器进行了不同加载频率和幅值的性能试验。试验结果表明:新型装配式高阻尼橡胶减振器在大变形下具有较强的耗能能力。带限位台阶的减振器和没有限位台阶的减振器相比,最大储能模量提高了22.3%,损耗因子提高了24.9%,且在较大位移幅值工况下,滞回曲线由原本的椭圆形变成类8字型,在保证较高阻尼力的同时使得滞回曲线所包络的面积增大,最大增幅可达588%。该新型减振器无需高温高压整体硫化,可以显著降低生产成本并提高生产效率,具有显著的性能优势和广泛的应用前景。     

起落架缓冲器静压曲线符合性偏差问题分析

依据起落架缓冲器静压缩曲线图对确保飞机起落架质量的重要性,对绘制起落架静压缩曲线图时出现的符合性偏差问题进行了分析,并提出了相应工艺措施。     

Dual Drive Curve Tool Path Planning Method for 5-axis NC Machining of Sculptured Surfaces

The problem of finished surface being not first-order continuous commonly exists in machining sculptured surfaces with a torus cutter and some other types of cutters. To solve this problem, a dual drive curve tool path planning method is proposed in this article. First, the maximum machining strip width of a whole tool path can be obtained through optimizing each tool position with multi-point machining (MPM) method. Second, two drive curves are then determined according to the obtained maximum machining strip width. Finally, the tool is positioned once more along the dual drive curve under the condition of tool path smoothness. A computer simulation and cutting experiments are carried out to testify the performance of the new method. The machined surface is measured with a coordinate measuring machine (CMM) to examine the machining quality. The results obtained show that this method can effectively eliminate sharp scallops between adjacent tool paths, keep tool paths smooth, and improve the surface machining quality as well as machining efficiency.     

基于等几何法的叶片电解加工过程仿真方法研究

航空发动机叶片具有复杂的加工边界,其电解加工的过程仿真是加工预测的重要手段.而传统基于有限元法的腐蚀过程仿真需要反复划分网格,且存在边界上计算精度不足的问题.提出利用等几何法原理提升叶片电解加工数值仿真精度的思路,采用NURBS基函数替代原有拉格朗日基函数建立加工间隙物理场的求解方程组,解决由于NURBS基函数在边界处非插值特性引起的Dirichlet边界条件施加误差.将阳极边界的腐蚀位移转化为其控制顶点位移,避免反复划分网格所占用的计算时间,提升过程仿真精度.最后,通过试验证明该方法的有效性.     

燃气轮机仿真中部件特性处理方法的准确性研究

在基于部件的燃气轮机性能仿真建模过程中,部件特性线处理方法的准确性是影响整个机组仿真精度的关键因素。分别介绍了采用传统离散插值处理方法、人工神经网络法和偏最小二乘法进行部件特性线处理的原理和方法,利用一部分已知样本特性数据和不同处理方法对某燃气轮机进行性能仿真,并将仿真结果与另一部分已知样本特性数据进行比较,分析不同处理方法对部件特性和整机性能计算精度的影响。结果表明:在仿真过程中利用偏最小二乘法可直接使用重构方程求解部件特性,无需对部件特性离散化和插值处理,避免了传统部件特性处理方法的计算误差,提高了燃气轮机热力模型求解的精度。     

基于边界涡量流的二维叶型优化建模与求解

针对二维叶片整体造型优化问题,提出一种基于边界涡量流的二维叶型优化模型,并对该模型进行求解。建立以含参数的Bezier曲线定义的二维叶型型线为边界、以边界涡量流正峰值的最小化为目标函数的优化模型,通过分析边界涡量流的生成机制,把叶型型线边界信息代入边界涡量流中,将边界涡量流用叶型型线参数和型线上的气动参数表示,进而获得新的目标函数表达式。该目标函数表达式可直接对叶型型线参数求导,仅使用简单的定步长梯度算法即可对优化模型求解。结果表明:优化后的叶型型线上的边界涡量流的正峰值显著降低。     

气动阀门自激振动机理及动态稳定性

基于弹簧振子的扰动响应特性,提出了气动阀门气固耦合自激振动的稳定性机理.以单向阀为例,根据小扰动原理,构建系统的气固耦合动力学模型及稳定性模型,通过求解线性方程组的特征根,得到了单向阀系统的稳定工作区间及参数影响特性,稳定性分析模型的有效性由单向阀气动试验验证.对于单向阀,存在压力-流量的临界稳定性曲线.工作压力一定时,当单向阀工作流量小于相应压力下的临界稳定流量,单向阀处于不稳定状态,一个微小的扰动都将会导致阀芯周期性振荡;反之,单向阀工作稳定,阀芯将处于稳定开度.增加单向阀阀芯阻尼、弹簧刚度及减小阀门进口直径在一定程度上将有助于提高单向阀的工作稳定性.