基于一致关联数最大化的航迹关联算法

航迹关联(TTTA)是多传感器数据融合系统的核心模块之一,是系统误差估计和航迹融合的前提和基础。传感器存在的固有系统误差使得目标位置状态估计与真值发生偏离,容易诱发TTTA错误。传统的基于全局最小距离准则的TTTA算法,需要获得较高精度的系统误差估计,来对航迹数据进行误差补偿。针对传感器具有系统误差环境下的TTTA问题,在对TTTA进行间接评估的基础上,定义了一致关联数的概念,提出了一致关联数最大化的TTTA准则,并在稳健交替迭代的框架下完成算法设计。与距离函数不同,一致关联数是一个离散量,放松了对系统误差估计精度的要求。最后,仿真实验验证了所提算法的有效性。     

高空气球太阳能电池标定用太阳跟踪控制技术

高空气球标定的太阳能电池是可被用于地面太阳模拟器和太阳光光强检测的标准电池。首先,给出了由飞行气球搭载的高空太阳能电池标定所使用的太阳跟踪控制系统设计方法,包括基于STM32的太阳跟踪控制系统硬件设计方案、混合自动追踪控制策略、软件开发与实现方法、高空跟踪控制技术问题解决方案以及高空标定试验等。同时,解决了高空气球电池标定用太阳跟踪控制系统在极端环境下高可靠性、连续追踪和防抖动等关键技术问题。试验结果为气球飞行高度32km,平飘时间超过2h,太阳跟踪偏差小于1°。经初步分析,高空太阳跟踪控制系统标定测试结果合理可靠,工作性能稳定,为中国高空气球太阳能电池AM0标定用太阳跟踪控制系统的研究提供了新思路。     

ETOPS型号设计批准要求

根据民用飞机和发动机的技术发展状态,FAA和EASA都制定了各自的ETOPS审定规章,并提出了相关的审定方法。     

大型空中加油机关键能力解析

空中加油是现代加油机能力谱系的核心,但绝非全部。单就空中加油能力来说,外供油量．对空中力量体系的保障适应性是设计人员需要考虑的主要问题。为了在装备体系中发挥最大的效能,加油机设计还需要考虑多用途能力和更好地完成任务所需的其他能力。     

基于试验设计的高负荷轴流压气机叶顶喷气参数化研究

为了揭示叶顶喷气对压气机稳定裕度的影响规律,对一跨声速轴流压气机进行三维非定常数值模拟,结合试验设计与统计学分析的方法对叶顶喷气展开参数化研究,并分析了叶顶喷气的扩稳机理。研究表明,叶顶喷气整体上提升了压气机的性能,通过激励叶顶环壁附面层抑制叶顶泄漏涡堵塞,达到提升压气机稳定裕度的目的。同时,叶顶喷气会引起压气机失速类型的变化。不同喷气量下的喷气规律是不同的,喷气量与喉部高度、喷气角度间存在交互作用。喷气量较小时应减小喷嘴喉部高度,在相对坐标系下沿转子叶顶前缘中弧线方向喷气;喷气量较大时应增加喉部高度,避免引起叶顶过载失速,喷气应提供正预旋来减小叶顶攻角。喷嘴应与转子叶顶前缘保持一定距离。     

A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

超燃冲压发动机燃烧室主动冷却设计研究

超燃冲压发动机燃烧室主动冷却模型制造和热考核试验的费用高昂、周期长,为了降低试验风险,采用三维计算和经济的验证试验相结合的方法开展了超燃冲压发动机燃烧室主动冷却设计。冷却结构基本参数设计和侧壁冷却流动设计是确定设计方案的两大基础,前者采用三维传热计算结合冷却面板传热验证试验完成,后者采用超临界燃料流动三维并行计算结合水流动验证试验完成。在此基础上,经过多轮的结构设计与三维传热及强度计算评估迭代,确定了最终的燃烧室主动冷却结构。设计的主动冷却燃烧室在来流马赫数2.5,总温1700K条件下成功通过200s热考核试验,表明所采用的设计方法、验证试验和计算工具是有效和可信的。     

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

Multi-objective optimization of aircraft design for emission and cost reductions

Pollutant gases emitted from the civil jet are doing more and more harm to the environ- ment with the rapid development of the global commercial aviation transport. Low environmental impact has become a new requirement for aircraft design. In this paper, estimation method for emis- sion in aircraft conceptual design stage is improved based on the International Civil Aviation Orga- nization （ICAO） aircraft engine emissions databank and the polynomial curve fitting methods. The greenhouse gas emission （CO2 equivalent） per seat per kilometer is proposed to measure the emis- sions. An approximate sensitive analysis and a multi-objective optimization of aircraft design for tradeoff between greenhouse effect and direct operating cost （DOC） are performed with five geom- etry variables of wing configuration and two flight operational parameters. The results indicate that reducing the cruise altitude and Mach number may result in a decrease of the greenhouse effect but an increase of DOC. And the two flight operational parameters have more effects on the emissions than the wing configuration. The Pareto-optimal front shows that a decrease of 29.8% in DOC is attained at the expense of an increase of 10.8% in greenhouse gases.     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.