无电阻CMOS带隙基准电压源的设计

设计了一种高准确度无电阻的带隙基准电压源。该电路采用差分结构的电压传输单元来代替电阻,并且没有使用运算放大器,从而避免了运算放大器所带来的高失调和必须补偿的缺陷。电流源采用共源共栅结构,提高了电源抑制比。增加了启动电路,保证电路可以正常工作。在0.6μm CMOS工艺条件下,电路的各项性能指标采用Sm artSp ice进行模拟验证,结果表明有效温度系数可以达到6×10-6/℃,电源电压从3.8 V变化到5.5 V时,输出的基准电压波动不到3 mV。     

基于最小一乘的跑道入口高度计算

跑道入口高度是关系着飞机能否安全着陆的关键参数,在其计算中需要采用曲线拟合预测的方法。目前大多是采用基于最小二乘准则的拟合方式。由于最小二乘准则的局限性,当下滑道随机误差不满足正态分布,在飞行数据中出现异常点时会给预测带来较大误差。将最小一乘方法引入到跑道入口高度计算问题中,提高了算法的稳健性,很好地克服了这一问题。     

基于MBD的飞机装配工装协同变更方法

装配工装在飞机产品生产过程中处于飞机设计的下游,受到飞机装配件设计及其装配工艺的影响以及飞机生产准备周期限制,时间紧迫,任务繁重。传统的飞机装配工装以文本、二维图形式表达为主,信息是静态的,缺乏唯一的数据源易导致飞机-装配工装协同变更管理效率低、准确性差,针对以上问题提出一种飞机-装配工装协同变更方法:利用基于模型的定义(Model based definition,MBD),建立了飞机和装配工装MBD模型关系架构,并结合相关的变更传播计算方法实现了飞机设计结构变更对装配工装变更影响的主动、自动化预测和分析。通过一套飞机壁板开口加强框的装配工装变更设计实例验证了该方法的可行性。     

机载实时模型稳态基准值的修正方法研究

发动机机载实时模型稳态基准值反映了当前发动机的工况,决定着实时模型的稳态精度。提出一种利用传感器测量数据修正机载实时模型稳态基准值的方法,具体采用多项式线性拟合技术、利用传感器近期测量数据修正机载实时模型的基准值,以适应发动机稳态特性的改变、提高模型稳态精度。针对某民用大涵道比涡扇发动机构建的在线故障诊断仿真系统研究表明,在发动机发生性能退化的情况下,修正后的机载实时模型的稳态误差降低近1.8%。     

A null frame for spacetime positioning by means of pulsating sources

We introduce an operational approach to the use of pulsating sources, located at spatial infinity, for defining a relativistic positioning and navigation system, based on the use of four-dimensional bases of null four-vectors, in flat spacetime. As a prototypical case, we show how pulsars can be used to define such a positioning system. The reception of the pulses for a set of different sources whose positions in the sky and periods are assumed to be known allows the determination of the user’s coordinates and spacetime trajectory, in the reference frame where the sources are at rest. We describe our approach in flat Minkowski spacetime, and discuss the validity of this and other approximations we have considered.     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

Revisiting Perspective-Taking: Can People Maintain Imagined Perspectives?

Abstract

Three experiments were conducted to examine whether people can adopt and maintain imagined perspectives in the absence of target information. The task used entailed providing information about an imagined perspective in advance of target information to examine whether this would facilitate perspective-taking performance and reduce or eliminate alignment effects that are commonly reported in the literature. The three experiments employed different types of spatial environments: an environment learned from navigating a computer screen (Experiment 1), and an immersive environment that was either remote (Experiment 2) or immediate (Experiment 3) at the time of retrieval. Across the three experiments, results showed that information about an imagined perspective can be utilized ahead of target information. Furthermore, they suggested that alignment effects can be reduced as a result of processing information about perspective ahead of target information, but only when reasoning about specific nonimmediate spatial relations (Experiments 1 and 2). Results are discussed in connection with previous findings on spatial updating and the organizational structure of spatial memory.     

基于Kriging模型插值的孔位修正策略

飞机装配时的孔位精度直接影响其最终装配质量，而待制孔零件易发生变形和整体偏移，因此一般通过基准孔信息对待制孔位进行补偿。提出一种基于Kriging插值的孔位修正方法，通过基准孔建立孔位理论坐标与实际偏差值的Kriging模型，进而预测待制孔的孔位偏差，并给出每个位置的预测标准误差，以指导基准孔的增添和布置。最后通过有限元和数值实验分别验证了零件在极限变形和整体平移旋转情况下该方法的有效性，实现了孔位估计误差小于0.3 mm。     

基于干扰观测器的高超声速飞行器预测控制器设计简

 针对具有强耦合特性与模型不确定性特点的高超声飞行器控制问题,提出一种新型的姿态预测控制器设计方法。引入参考模型,建立了飞行器姿态预测控制模型。基于此,利用预测理论设计了飞行器的预测控制器,同时设计了干扰观测器实时观测外界未知干扰来进行补偿控制,从而实现滚动优化的目的;基于干扰观测值与真值的误差,利用Lyapunov稳定性理论,确定了控制精度与预测步长大小的关系;最后,在参数标称与拉偏的情形下进行了高超声速飞行器姿态控制系统仿真,仿真结果表明,干扰观测器能快速跟踪干扰,并且所设计的预测步长可以满足飞行器高精度的控制要求。     

舰载机惯导动基座传递对准基准系统技术研究

根据舰载机惯导动基座高精度对准的需求,从系统顶层设计的角度,引入数字停机位空间坐标系概念,建立了舰载机惯导动基座传递对准的基准。在此基础上,分析了杆臂效应和船体挠曲变形对基准精度的影响,并给出了相应的处理模型和方法。舰载机可直接引入该基准坐标系下的导航信息进行对准,无须关注舰船性能参数和主导航安装位置等,有利于减少惯导动基座对准技术难度,提高对准效率。