轴向柱塞泵滑靴副的热结构耦合特性

为了改善轴向柱塞泵滑靴副的耐磨损性能,建立了滑靴与斜盘摩擦副的瞬态热结构耦合模型,分析压力冲击条件下滑靴的表面温度、应力以及变形的变化规律.研究结果表明:某型轴向柱塞泵中滑靴温度随柱塞腔压力呈周期性变化,滑靴温度范围为45.5~49.8℃,且滑靴的最高温度出现在泵的吸排油过渡区.当滑靴处于泵的排油区时,滑靴的最大轴向应力为250MPa,集中在滑靴油腔与密封带之间的边缘区域.滑靴的轴向应力分层显著,引起滑靴的变形分化,其变形量为12.5~15μm,出现在滑靴的边缘.由于滑靴的输入热流密度增强磨粒的剪切力,加剧滑靴表面的微切削和挤压变形,导致滑靴表面出现条状剥落和凹坑磨损,呈现出黏着和磨粒磨损特征.      

Remaining useful life prediction based on the Wiener process for an aviation axial piston pump

An aviation hydraulic axial piston pump’s degradation from comprehensive wear is a typical gradual failure model. Accurate wear prediction is difficult as random and uncertain char-acteristics must be factored into the estimation. The internal wear status of the axial piston pump is characterized by the return oil flow based on fault mechanism analysis of the main frictional pairs in the pump. The performance degradation model is described by the Wiener process to predict the remaining useful life (RUL) of the pump. Maximum likelihood estimation (MLE) is performed by utilizing the expectation maximization (EM) algorithm to estimate the initial parameters of the Wiener process while recursive estimation is conducted utilizing the Kalman filter method to estimate the drift coefficient of the Wiener process. The RUL of the pump is then calculated accord-ing to the performance degradation model based on the Wiener process. Experimental results indi-cate that the return oil flow is a suitable characteristic for reflecting the internal wear status of the axial piston pump, and thus the Wiener process-based method may effectively predicate the RUL of the pump.     

试验转速对大流量高转速轴流泵性能的影响

通过泵水力试验,对不同转速下大流量轴流泵的性能进行了对比分析,结果表明,在低转速下泵效率存在分层现象。分析发现效率分层的主要原因是低转速下试验所得的泵水力效率误差比较大,故需要对低转速下的试验效率值进行修正。为了使试验数据尽可能反映真实值,在试验设备能力允许的情况下,试验转速应不低于额定转速的80%。     

基于遗传算法的低比转速高速泵优化设计

针对低比转速高速离心泵在理论设计和实际应用中存在的三个主要问题,即扬程流量特性曲线易出现正斜率上升段、汽蚀性能差和效率低的问题,提出了利用自适应遗传算法求解低比转速高速离心泵优化模型的方法。数值试验表明,自适应遗传算法在求解复杂最优化问题时具有广泛的适应性和良好的精度,可将其应用于某低比转速高速离心泵的优化设计中。试验研究表明,该泵取得了良好的性能指标,达到了优化设计的目的。     

航天器热控系统中的热泵-蓄冷组合方案

提出了旨在降低热控系统质量的热泵-蓄冷组合热控方案。通过对负荷进行预测，对热泵蓄冷系统的集成模式，系统的运行策略，以及蓄冷设备的容量等问题进行了分析。结果表明：通过合理优化系统的运行参数，热泵蓄冷组合方案能实现热控系统的轻量化设计要求，在未来航天热管理系统中具有相当的应用潜力。     

超低比转速离心泵内流场计算及分析

运用FLUENT流体计算软件及GAMBIT前处理软件,采用三维k-ε双模型方程计算了一台高速超低比转速离心泵的内部流场。计算区域为从诱导轮进口到蜗壳出口的整个流场,通过计算得到了泵内流场的流动规律,并结合传统的泵水力估算方法,估算了泵的扬程、轴功率及效率,最后对该高速超低比转速离心泵进行了水力验证试验。验证结果表明所采用的计算方法可行。     

双端供油泵诱导轮与上端泵口卡滞故障分析与预防

通过对调试现场发生的故障现象进行分析和判断，找出整机调试中客观存在的问题，通过采取科学有效的方法与措施，杜绝后续同类故障的持续发生。     

Transient simulation of a differential piston warm gas self-pressurization system for liquid attitude and divert propulsion system

In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling method. The system includes the solid start cartridge,pressure-amplified tank with liquid monopropellant, liquid regulator, gas generator, and pipes.The one-dimensional finite-element state-variable model is applied to the pipes and the lumped parameter method is adopted for the other modules. The variations of the system operation parameters over time during the startup, steady-state, and pulsing operational processes are obtained from the transient model, and the characteristics of starting time changing with different system parameters are also analyzed. It is shown that the system startup process can be divided into three distinct processes. The starting time monotonically changes with variations of the liquid regulator parameters, first decreasing and then increasing with the mass change of the solid propellant charge of the start cartridge, initial gas cavity volume of the pressure amplified tank and initial gas cushion of the propellant tank. The starting time can be reduced to less than 1.0 s(0.68–0.75 s for the current system). For meeting the deviation requirements of ±10% of the steady-state propellant tank pressure, the positive deviation requirement is assured by the self-locking pressure and the negative deviation can be assured within an allowable maximum propellant tank volume flowrate(1.6 times the design value for the proposed system) for downstream thrusters for a designed system. The results from the simulation are useful as a guide for further system design and testing.     

Constant power H∞ stabilization control strategy on airborne pump supplying system

以机载泵源系统的恒功率控制为目标，针对作业任务中系统负载随时间变化的情况，采用使液压系统输出功率保持恒定的控制方式来达到充分利用发动机功率的目的，对于机载泵源控制系统的主要被控对象——轴向柱塞式变量泵，建立了其状态方程和流量输出方程，采用H。鲁棒镇定控制策略实时调节泵的排量，仿真结果表明：当负载变化时，系统能根据压力的变化快速转换到恒功率工作曲线下对应的流量状态，所设计的H。控制器能够减小干扰和模型参数不确定对系统稳定性的影响，具有良好的鲁棒性，表明该方法用于机载液压系统可以改善系统工作性能，提高系统功率的利用率。     

Modeling and control of a novel electro-hydrostatic actuator with adaptive pump displacement

The variable pump displacement and variable motor speed electro-hydrostatic actuator (EHA), one of the three types of EHAs, has advantages such as short response time, flexible speed regulation, and high efficiency. However, the nonlinearity of its double-input single-output system poses a great challenge for system control. This study proposes a novel EHA with adaptive pump displacement and variable motor speed (EHA-APVM). A closed-loop position is realized using a servomotor. Moreover, the displacement varies with the system pressure; thus, the EHA-APVM is a single-input and single-output system. Firstly, the working principles of the EHA-APVM and the pump used in the system are introduced. Secondly, a nonlinear mathematical model of the proposed EHA-APVM control system is established, and a feedback back-stepping (FBBS) control algorithm is introduced to transform the complex nonlinear system into a linear system on the basis of the back-stepping control theory. Finally, simulation results prove that the EHA-APVM has a quick response and high robustness to variations of the load and the pump displacement. In this work, the size and weight of the motor are significantly reduced because the maximum power requirement is reduced, which is very beneficial for using the actuator in airborne equipment.