基于传热与压力损失的气-水换热器耦合设计

针对换热器设计中如何合理兼顾传热效率和压力损失的难题,以矩形流通截面的燃气-水列管式换热器为对象,从理论上分析了设计参数之间的内在联系,揭示了换热面积与燃气流通面积、横向管间距、换热管直径之间的匹配关系,建立了基于压力损失和传热计算的耦合设计方法。这种方法已成功应用于某大型燃气冷却器的设计,也可供其它换热器设计时参考。     

原子氧对Kapton／Al薄膜性能影响研究

模拟空间环境下原子氧辐照条件,通过采用固定的原子氧束流密度进行不同时间辐照试验,研究了温控涂层材料Kapton/Al薄膜的质量损失、光学性能、表面形貌和表面粗糙度的演化规律.试验结果表明,原子氧对材料的剥蚀量与原子氧的作用时间成正比例关系.材料辐照后太阳吸收率发生明显变化,而辐射率几乎不发生变化.辐照后试样表面的粗糙度,是影响太阳吸收率变化主要因素.随着辐照时间的增长,材料表面粗糙度增加,导致太阳吸收率增大.     

某型发动机新件涡轮叶片叶冠掉块故障分析

为排除某型发动机新件涡轮叶片叶冠掉块故障,对故障件进行尺寸检测、加工制造工艺复查、断口分析、结构和强度分析等,认为:引发故障的主要原因是叶冠转接R不圆滑、存在尖角,造成应力集中;而相邻原机件叶片弦宽尺寸超差,锯齿形工作接触面积小,以及非工作面局部碰磨,是引发故障的次要因素。采取并验证了有针对性的排故措施。     

A Comparative Study of the Influence of the Active Young Sun on the Early Atmospheres of Earth, Venus, and Mars

Because the solar radiation and particle environment plays a major role in all atmospheric processes such as ionization, dissociation, heating of the upper atmospheres, and thermal and non-thermal atmospheric loss processes, the long-time evolution of planetary atmospheres and their water inventories can only be understood within the context of the evolving Sun. We compare the effect of solar induced X-ray and EUV (XUV) heating on the upper atmospheres of Earth, Venus and Mars since the time when the Sun arrived at the Zero-Age-Main-Sequence (ZAMS) about 4.6 Gyr ago. We apply a diffusive-gravitational equilibrium and thermal balance model for studying heating of the early thermospheres by photodissociation and ionization processes, due to exothermic chemical reactions and cooling by IR-radiating molecules like CO₂, NO, OH, etc. Our model simulations result in extended thermospheres for early Earth, Venus and Mars. The exospheric temperatures obtained for all the three planets during this time period lead to diffusion-limited hydrodynamic escape of atomic hydrogen and high Jeans’ escape rates for heavier species like H₂, He, C, N, O, etc. The duration of this blow-off phase for atomic hydrogen depends essentially on the mixing ratios of CO₂, N₂ and H₂O in the atmospheres and could last from ∼100 to several hundred million years. Furthermore, we study the efficiency of various non-thermal atmospheric loss processes on Venus and Mars and investigate the possible protecting effect of the early martian magnetosphere against solar wind induced ion pick up erosion. We find that the early martian magnetic field could decrease the ion-related non-thermal escape rates by a great amount. It is possible that non-magnetized early Mars could have lost its whole atmosphere due to the combined effect of its extended upper atmosphere and a dense solar wind plasma flow of the young Sun during about 200 Myr after the Sun arrived at the ZAMS. Depending on the solar wind parameters, our model simulations for early Venus show that ion pick up by strong solar wind from a non-magnetized planet could erode up to an equivalent amount of ∼250 bar of O⁺ ions during the first several hundred million years. This accumulated loss corresponds to an equivalent mass of ∼1 terrestrial ocean (TO (1 TO ∼1.39×10²⁴ g or expressed as partial pressure, about 265 bar, which corresponds to ∼2900 m average depth)). Finally, we discuss and compare our findings with the results of preceding studies.     

吸力面翼刀对压气机叶栅内二次流的影响

1引言在叶轮机械叶栅内流动控制中,可以通过在叶片吸力面、端壁上安装翼刀或隔片,控制二次流的发展,降低二次流损失,其中将翼刀加装在吸力面上的控制方式即为吸力面翼刀控制技术。吸力面翼刀主要是通过阻断端壁附面层和叶片吸力面附面层近端壁处低能流动沿吸力面的展向迁移来对     

子午扩张流道中叶片积叠线形式对损失的影响

采用全三维粘性流N－S方程程序，对具有大扩张角中间机匣的某型涡轮 低压导向器叶栅中的流场进行了数值模拟。在子午面型线不变的条件下，导向器叶栅采用了10种不同变曲和倾斜形式的叶片。计算结果表明：导向器叶栅采用不同积叠线形式的叶片，对导向器叶栅出口截面上通道涡的位置，强度和尺度以及能量损失的影响是显著的，采用适度的正弯或正倾斜叶片可降低导向器叶栅的能量损失。     

固体微推力器设计与数值分析

设计了两种基于微光机电技术的固体微推力器结构,其中一种结构具有不连续的非正常拉瓦尔喷管。采用数值计算方法对不同的设计进行了内弹道、燃气流动过程和热损失的数值分析。结果表明:不连续的非正常拉瓦尔喷管同样能够将推进剂燃气加速到超声速,其比冲性能与正常拉瓦尔喷管相当;微光机电技术常用的硅材料会造成推力器比冲性能较大量级的下降,而绝热性能良好的玻璃或陶瓷材料可以有效提高微推力器的比冲性能。     

考虑冷气喷射的涡轮叶栅尾缘损失理论分析

 基于Denton 的尾缘流动理论, 发展了一种考虑冷气喷射的二维、可压涡轮叶栅尾缘混合损失模型,研究了涡轮叶栅尾缘损失的特征, 定量评估了影响尾缘损失的各种参数。研究表明, 冷气流量是影响尾缘损失的一个重要参数, 对于主流马赫数为11 1 的典型情况, 冷气流量从0 增大到10%, 损失增大315 倍。叶片尾缘基压变化对损失也具有明显的影响, 其它影响损失的参数包括叶栅出口位置边界层动量厚度、冷气总压、叶栅尾缘厚度等。     

“田口式质量损失函数”的应用

利用质量损失函数，讨论产品质量波动给社会带来的损失，并将其应用于企业生产中，使企业改进了产品质量，提高了效益。这说明，在质量管理中，解决“质量”问题时，必须把改进质量的焦点移向产品的设计和开发阶段，即从以往的“产品出厂后的检查或加工过程中的控制”的质量观，推向“产品设计阶段的优化”，从“下游管理”转向“上游管理”，使产品设计或加工过程设计成为保证产品质量优化的关键。     

用双激波模型计算风扇/压气机非设计点的性能

根据现代高速风扇/压气机内激波波系的真实结构,将适用于预测高速叶型激波损失的双激波模型引入基于基元叶片特性的流线曲率法程序,发展了一种用于预估高速风扇/压气机非设计点性能的方法。该双激波模型考虑了来流马赫数和攻角变化,较真实地反映了高马赫数风扇/压气机的实际工作状况,扩展预测风扇/压气机非设计点性能的能力。利用该模型,本文分别对一台叶尖马赫数达到1.4的大涵道比风扇和一台叶尖马赫数高达1.5的三级风扇的非设计点性能进行了计算,计算结果与试验结果保持了较高的吻合性。