面向单目立体视觉的立方镜图像处理技术

面向单目视觉辅助光电准直仪对立方镜进行准直的需求,研究针对立方镜图像的数字图像处理技术。采用Canny边缘检测方法得到灰度图像中的边缘信息,借助Hough变换按照直线程度的强弱对边缘信息进行分类提取,得到图像中立方镜棱边对应的直线信息。按照偏角与截距对棱边直线信息进行分类排序,结合先验知识得到立方镜角点对应的配对相交直线,对配对直线求交点得到立方镜角点在图像中的位置,得到的立方镜棱边及角点信息为后续的立方镜位姿计算提供了基础数据。     

Time delay compensation in lateral-directional flight control systems at high angles of attack

The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack. In this investigation, the effects of time delay on the lateral-directional stability augmentation system in high-α regime are discussed based on the $\dot{\beta }$ model, which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateral-directional unsteady aerodynamic characteristics at high angles of attack. Both the $\dot{\beta }$ model and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-α maneuvers. The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay. Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based on $\dot{\beta }$ model are designed to address the time delay in different maneuvers. The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack. Finally, the gain-prediction compensator is combined with a linearized $\dot{\beta }$ model reference adaptive controller to compensate the adverse effects of very large time delay, which exhibits excellent performance when addressing the extreme conditions at high angles of attack.     

航天器激光防护材料研究现状与发展趋势

根据激光防护的原理和途径,介绍了基于线性光学原理、基于非线性光学原理和基于相变原理的激光防护材料的特点及其国内外研究进展,讨论了激光防护材料的发展方向。     

双极性压缩观测光谱成像技术研究

压缩传感突破了 Nyquist-Shannon 采样定理的限制,从随机观测的少量测量值中即可高精度地获取图像,给成像设备的设计带来了巨大变革。压缩传感理论证明可以通过重构恢复获得比焦平面阵列分辨率更高的场景图像。尽管在理论上存在巨大优越性,压缩传感成像系统的物理实现需要考虑一些实际问题。文章围绕压缩传感成像设备进行了研究,提出了一种物理可实现的压缩成像方法,该方法利用双通道观测架构实现压缩成像中的双极性观测,解决了压缩成像理论与实际物理约束不一致的问题。采用多路技术和多膜技术实现大视场观测与多次视场观测,该方法可以单次曝光获取充足的观测值来高精度重构原图像。压缩光谱成像数值仿真实验验证了该方法的有效性和鲁棒性。     

基于三维最小二乘方法的空间直线度误差评定

空间直线度误差是评定机械产品精度的一项重要指标,实际工程中对空间直线度误差评定算法的精度要求越来越高.为了准确评定空间直线度误差,参照国家标准(GB/T 11336—2004),采用三维最小二乘方法建立了空间直线拟合的数学模型,并给出了该数学模型的精确解.基于最小二乘拟合中线,采用空间投影、坐标变换和格点法求得最小二乘中线包容圆柱面直径.采用数值算例验证了新方法的有效性.提出的空间直线度误差评定方法精度高、鲁棒性好且易于编程实现.     

复合材料在长焦距空间光学遥感器上的应用

对碳纤维增强聚合材料(CFRP)和碳化硅颗粒增强铝基(SiCp/Al)复合材料在空间光学遥感器的应用进行了介绍,并以某长焦距空间光学遥感器的主支撑结构为例,对应用不同材料时遥感器的质量、固有频率、热位移等进行了研究。研究结果表明:应用复合材料能够使主支撑结构质量降为278kg,从而降低发射成本;结构具有较大的刚度,固有频率为156.09Hz,满足设计指标;可以更加有效控制结构热变形引起的光学元件刚体位移,提高成像品质。文章对复合材料更好地应用于长焦距空间光学遥感器,具有一定的参考价值。     

Tropospheric wet refractivity tomography using multiplicative algebraic reconstruction technique

Algebraic reconstruction techniques (ART) have been successfully used to reconstruct the total electron content (TEC) of the ionosphere and in recent years be tentatively used in tropospheric wet refractivity and water vapor tomography in the ground-based GNSS technology. The previous research on ART used in tropospheric water vapor tomography focused on the convergence and relaxation parameters for various algebraic reconstruction techniques and rarely discussed the impact of Gaussian constraints and initial field on the iteration results. The existing accuracy evaluation parameters calculated from slant wet delay can only evaluate the resultant precision of the voxels penetrated by slant paths and cannot evaluate that of the voxels not penetrated by any slant path. The paper proposes two new statistical parameters Bias and RMS, calculated from wet refractivity of the total voxels, to improve the deficiencies of existing evaluation parameters and then discusses the effect of the Gaussian constraints and initial field on the convergence and tomography results in multiplicative algebraic reconstruction technique (MART) to reconstruct the 4D tropospheric wet refractivity field using simulation method.     

一种新型的基于预测的卫星资源分配方法

针对传统的按需分配方式所造成的长时延问题,提出了一种新型的基于业务预测的按需分配方法。该方法通过预测业务在等待队列中的长度,将预测信息发送给网络资源控制中心,再由控制中心动态地分配带宽资源,达到服务质量的要求。在阐述了按需分配和业务预测的基本算法后,通过仿真分析了不同的业务类型采用不同的预测信息发送间隔时间的时延性能,分析中考虑了实时业务比非实时业务享有更高的优先权,并且比较了常规按需分配与基于业务预测的按需系统分配方法的时延性能。仿真结果表明利用业务预测,选择合适的预测信息发送间隔时间,能够有效地改善带宽资源分配的时延性能,相比一般的按需分配方式服务质量有了明显的提高。     

空间光学望远镜在轨建造中的结构机构技术

围绕空间光学望远镜在轨建造中的结构机构技术进行分析,重点包括结构机构相关的关键技术基本概念和技术特点,分别对大型望远镜空间结构拓扑构型优化及模块技术、光机结构机构的高精度展开调整及锁合技术、典型光机元件的在轨增材制造技术、机器人辅助自主精密装配及控制技术进行了技术内涵及先进技术途径分析.最后展望了在轨建造中结构机构技术...     

LEO卫星网络中无缝切换管理技术研究

针对低地球轨道(LEO)卫星网络中采用移动IPv6(MIPv6)协议带来切换延时长,丢包率高的缺点,本文提出了一种基于MIPv6协议的简单卫星代理本地转发策略。通过解除MIPv6协议中切换过程与位置注册消息交换过程的耦合关系,显著降低了切换延时和切换丢包率。仿真结果表明,新策略与MIPv6协议相比,丢包率降低达75%以上。