Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

大型飞机迎角保护控制律设计及试飞技术研究

针对大型飞机迎角保护控制律设计及试飞问题,通过杆位移-过载梯度的实时精确调整及取大值逻辑指令切换,设计了迎角保护控制律,实现拉杆到底飞机迎角达到且不超过限制迎角的目的。根据迎角保护控制律的功能及试飞目的,将整个试飞过程分为三个阶段,研究了各个阶段的试飞技术。仿真结果表明,所设计的控制律能够实现迎角保护功能,具有良好的控制效果。     

基于VALOR NPI的航空电子模块DFM分析实现

为有效解决设计缺陷造成的航空电子模块可制造性问题,结合航空电子模块产品特点和工艺技术水平,提出建设基于VALOR的航空电子模块可制造性设计自动化设计平台,实现DFM自动化分析与设计,阐述了DFM设计的必要性、技术原理和实现过程,提出了“三库”构建方法和基于物料清单的印制电路板数据分析方法,应用结果表明,提出的方法能够覆盖PCB可制造性问题,提高分析效率。     

三维自适应终端滑模协同制导律

针对多枚导弹协同作战的问题,且多枚导弹之间保持有向拓扑通信的条件下,基于终端滑模法设计了视线方向及视线法向的双层协同制导律。其中,视线方向的制导指令能够保证导弹同时完成拦截任务;视线法向上的三维制导律能够保证每枚导弹以期望的视线角攻击目标,从而发挥各枚导弹的最大杀伤力,并且视线角的约束相当于规划了末制导段导弹的弹道问题,在一定程度上避免攻击目标前导弹间发生碰撞。同时,针对所设计的滑模制导律设计了新的自适应律,从而加快了滑模面的收敛速度并且削弱了由符号函数引起的系统抖振现象。基于李雅普诺夫稳定性理论,证明了所设计制导律的正确性,并在最后给出了数学仿真实验,验证了所设计制导律的有效性及优越性。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于分数阶微积分理论的最优导引律设计

随着技术的发展及战场环境的日益复杂化,拦截机动目标的需求越来越大。然而传统制导律在拦截机动目标时存在制导精度差、末端过载突变的问题,故提出了一种基于分数阶微积分理论的最优导引律。首先,介绍了分数阶微积分的定义、性质及其数字实现方法;然后,分析了弹目相对运动关系,通过分数阶变阶次建模和最优控制理论推导出了分数阶导引律;最后,仿真结果表明：与传统比例导引法相比,所设计的分数阶最优导引律能够保持比例导引法良好的追踪性能且拦截时间能够缩短2s,末端过载值趋近于0。该方法解决了传统比例导引法在末端由视线角速率发散而导致的末端过载突变问题。     

民用飞机控制律对偏航机动载荷影响分析

飞机机动过程中方向舵快速大幅偏转会使方向舵和垂尾上产生较大气动载荷并传递到后机身,导致 驾驶员来回往复蹬舵造成安全事故。针对 CCAR-25部25.351条规定的偏航机动情况及 CS-25部25.353规定的偏航机动新条款——方向舵往复偏转,本文首先对两种偏航机动条款分别进行分析;然后考虑控制律进行 偏航机动情况机动仿真计算;最后通过比较分析飞机响应运动参数及垂尾载荷计算结果,并分析控制律对偏航 机动载荷的影响。结果表明:对于偏航机动,考虑控制律后飞机的响应幅度有所缓减,导致垂尾载荷有所降低; 对于偏航机动新条款,由于方向舵反向偏转导致侧滑角贡献和方向舵偏度贡献垂尾载荷两者叠加,从而导致垂 尾载荷大幅增加;P-Beta控制律有效降低了方向舵往复偏转的垂尾载荷。     

基于双框架控制力矩陀螺的航天器动量管理

为减小维持大型航天器的姿态稳定和降低能量消耗的动量管理中的扰动力矩对姿态稳定的干扰,设计了周期性抑制滤波器。姿态控制的执行机构采用双框架控制力矩陀螺群（DGCMGs）,应用KENNEL操纵率,使航天器执行机构的角动量在本体系的x轴分量和偏航角可达稳定,同时角动量在本体系的z轴分量和滚转角可在较小的范围内振荡。数值仿真结果验证了方案的可行性。     

一种扩展的比例导引规律及其弹道方程的构建

在传统的动力学微分方程的基础上提出了一种扩展的比例导引法 ,并给出了该导引规律下的相对弹道方程。文中的推理过程表明 ,这种导引规律对导弹、目标的运动速度几乎没有限制 ,理论上说明运用该制导规律的导弹将能对付高机动大速度目标 ,其弹道方程的建立 ,使得研究该制导规律下的弹道特性成为可能。     

基于终端角度约束的二阶滑模制导律设计

针对空地导弹具有终端角度约束条件的制导律设计问题,提出了一种在有限时间内稳定的新型二阶滑模制导律。首先,在弹目相对运动学模型基础上,将终端弹道倾角约束转化为终端视线(LOS)角度约束,作为制导系统的终端控制目标。其次,通过选取一种新型二阶滑模面,结合螺旋控制算法的思想,设计了一种二阶滑模变结构制导律,来抑制系统中的不确定性因素,从而满足零化视线角速率和制导系统的终端角度约束条件的要求。采用一种新的Lyapunov函数,基于Lyapunov稳定性理论,严格证明了制导系统在有限时间内的稳定性。最后,对空地导弹制导系统进行数字仿真,通过和一阶传统滑模制导律以及基于超螺旋算法的二阶滑模制导律进行对比分析,验证了所设计的制导律在保证制导精度的同时,更能在有限时间内提高终端约束角度的精度,并且避免了超螺旋算法中参数选取较多的问题。